MATERIALS:Master Bond EP30M3LV is a specially engineered, low exothermic epoxy system formulated to help avoid excess heat buildup and damage to thermally sensitive components during potting operations. It also contains a special additive to remove air bubbles. This compound cures at room temperatures or more rapidly at elevated temperatures, and can be cured in various cross section thicknesses. EP30M3LV has a volume resistivity of 2×1015 ohm cm at 25C. It has a convenient 2:1 mix ratio by weight and an advantageously low mixed viscosity of 2,000-3,000 cps. It has a service operating temperature range of -60 to 250F. EP30M3LV also has superior dimensional stability, a flexural strength of 14,000 psi and a tensile strength of >8,000 psi. Master Bond EP30M3LV is environmentally friendly, 100 percent reactive and contains no solvents or diluents. It is available for use in half-pint, pint, quart, gallon and 5 gal pail kits.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.