This isn’t the “Home Energy Efficiency Improvement Blog”, but maybe it should be. Still battling my new home’s unsightly energy guzzling, I am looking for any and all solutions to cut my utility bill. CNN Money.com just posted a series of improvements homeowners can make to “Cut your energy bills in half”. However, each of these fixes requires a trip to the hardware store at a minimum, and some require professional installation.
Here is a trick the amateur do-it-yourselfer can accomplish right now with a step-ladder and a screwdriver: turn your vents away from exterior windows.
Instead of blowing conditioned air right at the surfaces least insulated from the outside (the windows), vents should be turned facing into the room. This configuration enables heated or cooled air to have the greatest comfort impact while minimizing leakage and conduction to the outside.
Since I’m not CNN, I can’t estimate how much money and energy this simple fix will save, but its costs nothing and can be completed in about 10 minutes.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
