HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Blogs
Blog
Researchers Build Concrete-Composite Offshore Floating Wind Turbine
8/28/2013

The first offshore floating wind turbine has been deployed off the coast of Brewer, Maine. The project, overseen by the University of Maine's Advanced Structures and Composites Center, is an early attempt to harness some of the strong offshore winds and paves the way for wind farms to be set up 50 miles off the coast where the winds are strong and consistent. Backers of offshore wind turbines believe they can harvest 5 gigawatts of power by 2030.   (Source: University of Maine)
The first offshore floating wind turbine has been deployed off the coast of Brewer, Maine. The project, overseen by the University of Maineís Advanced Structures and Composites Center, is an early attempt to harness some of the strong offshore winds and paves the way for wind farms to be set up 50 miles off the coast where the winds are strong and consistent. Backers of offshore wind turbines believe they can harvest 5 gigawatts of power by 2030.
(Source: University of Maine)

Return to Article

View Comments: Newest First|Oldest First|Threaded View
Page 1/2  >  >>
Elizabeth M
User Rank
Blogger
Re: Concrete- Composite Floating Platform
Elizabeth M   9/3/2013 5:17:39 AM
NO RATINGS
Thanks for that information, Jim S. I wasn't exactly sure how the floating system works but that makes a lot of sense. I always thought the idea of a "floating" structure was a bit of a misnomer and there had to be some anchorage in there somewhere! So it is true.

akwaman
User Rank
Gold
Re: Offshore Turbines
akwaman   8/30/2013 3:46:35 PM
NO RATINGS
@a.saji: It is obvious to most, that the maintenance costs of offshore devices like this will be higher than the terrestrial based versions.  Of course, they may be offset by the fact that no costs at all will be incurred by land rental or purchase.  I personally would wonder if wind turbines in the open ocean would be better served using Darious rotors, for reduced costs of maintenance and safety.  Terrestrial based turbines with the generators at the top are maintained by people climbing them and doing the maintenance.  This might be easier with the Darius rotor in the open ocean, because the generator and gears are at the bottom.  This would also lower thecenter of gravity, making it more stable on a floating platform.

a.saji
User Rank
Silver
Re: Offshore Turbines
a.saji   8/29/2013 11:58:01 PM
NO RATINGS
@apresher: In anywhere maintenance cost is considered as high most of the time.         

apresher
User Rank
Blogger
Offshore Turbines
apresher   8/29/2013 5:51:07 PM
NO RATINGS
From past articles I've done, my understanding from suppliers is that offshore turbines (especially in North America) isn't gaining ground like it is in Europe and other places where available land is a factor. Maintenance costs are high for offshore, for example.

Watashi
User Rank
Platinum
Re: Concrete- Composite Floating Platform
Watashi   8/29/2013 3:39:11 PM
NO RATINGS
I can see the platform surviving a huricane, but not so sure about the composites.  If they build them like the oil rigs, maybe they will only need to replace the blades after big (cat 2+) storms. 

Ann R. Thryft
User Rank
Blogger
Re: Offshore winds have great potential
Ann R. Thryft   8/29/2013 3:00:17 PM
NO RATINGS
Thanks, Elizabeth, for this story. The concrete-composite combo makes a lot of sense. We've covered the use of corrosion-free composites used in pontoons and docks, and combining it with concrete clearly gives stability and weight where needed, as well as lower cost.

Jim S
User Rank
Gold
Re: Concrete- Composite Floating Platform
Jim S   8/29/2013 11:52:54 AM
NO RATINGS
They are all anchored. The Floating type are tethered to the bottom through cables and anchors arranged around it. The others are tall enough that they are towed out floating and then sank so that the bottom is firmly on the sea bed. There have been some tv programs on how it was done.

Jim S
User Rank
Gold
Re: Concrete- Composite Floating Platform
Jim S   8/29/2013 11:52:54 AM
NO RATINGS
They are all anchored. The Floating type are tethered to the bottom through cables and anchors arranged around it. The others are tall enough that they are towed out floating and then sank so that the bottom is firmly on the sea bed. There have been some tv programs on how it was done.

Elizabeth M
User Rank
Blogger
Re: Concrete- Composite Floating Platform
Elizabeth M   8/29/2013 11:07:30 AM
NO RATINGS
Sounds like those platforms would be a good example to those deploying turbines offshore. I think the floating idea is a good one but anchorage may be a better option, especially to handle severe storms. I suppose it wil be a trial and error situation as some of these early platforms in the U.S. are deployed to see what works.

Elizabeth M
User Rank
Blogger
Re: 1:8th scale?
Elizabeth M   8/29/2013 11:02:50 AM
NO RATINGS
Hi, Capt. Ron, yes you read correctly. In the story link I posted in my previous comment it says the proposed turbines are taller than the Washington Monument. I suppose they will be built solidly enough to withstand the perfect storm, but I guess it would take those type of conditions to find out what happens.

Page 1/2  >  >>
Partner Zone
More Blogs
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Design News and Digi-Key presents: Creating & Testing Your First RTOS Application Using MQX, a crash course that will look at defining a project, selecting a target processor, blocking code, defining tasks, completing code, and debugging.
These are the toys that inspired budding engineers to try out sublime designs, create miniature structures, and experiment with bizarre contraptions using sets that could be torn down and reconstructed over and over.
PowerStream is deploying the microgrid at its headquarters to demonstrate how people can generate and distribute their own energy and make their homes and businesses more sustainable through renewables.
Printrbot unveils its all-metal Printrbot Simple, bringing durability to low-cost 3D printers.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service