Many years ago, I got a call from a client saying its computer had crashed. It followed with the fact that it had been doing that for about a week, but only at the end of the day and always, so far, while it was not being used.
This turned out to be a blessing, as each time it came back without apparent data loss or corruption. I went over the computer with a fine-tooth comb, and all I could discover from the event logs was that it rebooted a few minutes earlier each day. I returned a little before the time it had crashed the night before and started my vigil, monitoring with all my senses.
Nothing happened at the time it had the previous night. A minute or two later, my mind wandered from the bright screen, and I momentarily gazed out the window at the approaching twilight. A billboard lit up across the street, breaking my reverie, and I glanced back to my now dark screen.
With winter approaching, the billboard's photoelectric sensor was turning on the lights a little earlier each night. The culprit was at hand. After a power line analyzer confirmed the source, I contacted the billboard company to make it aware of the problem.
For some time, I had been trying to convince this customer of the value of having its workstations on UPSes. Now, with compelling evidence and a bill for debugging time, it took the plunge and put UPSes on all its appropriate computer and networking equipment. The demon was throttled.
This entry was submitted by Dave Ussell and edited by Jennifer Campbell.
Dave Ussell is a graduate of San Diego State University with a degree in physics. He has worked most of his professional career seeking out problems he has no experience with whatsoever, such as repairing electron microscopes or C-141s. He spent 15 years working at Children's Hospital and Health Center in San Diego supporting evoked potential research. He later founded and is now the principal of ASCII 27, a company that does everything from designing widgets for disabled persons, medical instrumentation, and the fishing industry to computer forensics.
Tell us your experience in solving a knotty engineering problem. Send to Jennifer Campbell for Sherlock Ohms.
This is indeed a rare one. I have heard of people having problems with power, but it is generally with the power company. To have another user cause this type of problem is interesting.
Years ago (decades) there were routine brown outs. This is when the voltage is lowered intentionally. This caused a lot of computer equipment to malfunction. Things are better now.
I worked in power line analyzing/conditioning and UPS decades ago: it's a field ripe for Sherlock Ohms stories. Thanks for this one, although I agree with 3drob--what exactly was the computer's failure mode? In this situation, a dip of some kind may be more likely to occur after the billboard comes on than a spike or surge, unless a grid adjustment then causes a spike or surge.
We have these wonderful strip-malls here in Maine that have one single power feed, they're usually on a fairly rural road and the 5 or so tenants which vary from high energy metal processing to insurance agencies to supermarkets, all in the same building. Firing-up a high energy plasma cutter and air compressor, a couple of refrigeration compressors and an annealing oven all at the same time tends to put more noise on the AC lines than any sane designer ever imagined. Now take your critical items like PC's in insurance and law offices, cash registers in supermarkets, wi-fi sites in book stores, and try to convince all of them they need UPS at THEIR cost. Our power distribution grid in some of these areas is still using #10 copper insulated with tar installed in the 1920's. It's asking an awful lot of a 21st century power-supply make by the lowest bidder to deal with that kind of noise.
From what I have heard, we still have scheduled brownouts but they are carried out less obtrusively than in the past. I would imagine there was some type of drop in voltage or dip as Ann mentioned - it would be interesting to know the exact cause. While UPS's would solve the power loss problem during equipment operation - maybe the root cause could be addressed...good job making the connection between the computer's power loss and that billboard!
I used to do computer controllered conveyor systems and my partner and I would work through the night and never have a problem. But everyday around 10 am, the computer would crash. We reasoned it was due to brownouts and finally were persuasive enough to get a UPS added and the problem went away.
I had another site that kept crashing and the plant managers swore up and down that they were using less power than they ever had and pointed to their terminals attached to their mainframe that power couldn't be the problem. I pointed out their mainframe was on the other side of a massive UPS and those were only terminals. Did they have any PCs in the plant? They said only on the worker punchclock and that the vendor had placed a line monitor on it. So I wasn't the only one suspecting power problems. The next morning on the cab ride to the plant I asked the cabbie if he knew anything about the area, He said yes, he remembered when the plant was the only building in this huge industrial park we were driving through. One UPS later, the problem was solved.
I'd come back to visit my home town and my aunt would handcuff me to her machine to fix it. I determined the power in her small town flickered enough to scramble her hard drive controller, but leave her CPU running just fine. One UPS later, I could come and just visit instead of spending my entire visit fixing her computer.
A good quality UPS does a lot more than solve a power loss problem during operation--that's an aspect of their power conditioning function. It also, and most important, provides clean, conditioned backup uninterruptible power (UP) when the regular AC goes down. When I worked in the field, the main machines were great, big honking things for hospitals and the IT departments of major corporations. Now we've also got very low-end systems, as bob from maine describes (although those excessive conditions aren't normal where I live). These products are over-priced, not very capable, and not very useful. They're also extremely user-unfriendly, at least to purchase correctly, unless you happen to be an electrical and/or UPS specialist. After 25 years, I have yet to buy one for my home office.
When I first got into industrial systems I worked at a company that made a lot of production line test equipment. Our chief engineer demanded that every machine that utilized logic more complex than relays had to have a Sola Constant Voltage Transformer. Of course, it did add to the machine cost, but those machines never suffered from power problems, other than total feed collapse. The CVTs were not that efficient, they still run too hot to touch, even today, but preventing both spikes and dips from getting into the sensitive circuits has avoided a wole big lot of headaches and grief. So possibly just using a CVT could be beneficial.
But I did work at one company where my UPS would sound it's warning every day a bit after three. It would happen on many of the ups systems on many of the computers. WE never did find the cause, but the systems paid for themselves in less than a year, in lost time avoided. So sometimes the workaround is cheaper thanbnan actual solution. "Long live the UPS"
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
