Made by Monkeys

Monkeying Around With the Mazda Saved Some Cash

View Comments: Oldest First|Newest First|Threaded View
<<  <  Page 5/5
User Rank
Re: It pays to be mechanically inclined
OLD_CURMUDGEON   3/28/2013 8:03:28 AM
Al Klu:  SORRY to you!  I AM NOT wrong.  In fact, I saw the MAZDA B2300 pick-em-up truck yesterday on the lane next to me on the highway.  It was red, with a simple camper-type top over the bed, and it had a FLA tag.  The vehicle looked IDENTICAL to the FORD RANGER pick-em-p truck that was recently dropped from the FoMoCo line-up!!!!  NOTICE above I referenced the MAZDA model as the B300, NOT the B2600i, as you referenced!!!!! 

In my ORIGINAL post, I was NOT referring to the original Japanese import MAZDA trucks.  In fact, in the early 1970s, I had a DATSUN 510 station wagon, and a good buddy of mine bought a MAZDA station wagon w/ the WANKEL engine.  Unfortunately for him, he SHOULD have bought a Ferrari or FORMULA 1 vehicle, since he proceeded to burn up the rotary engine in less than 50K miles.  He delighted in see the tachometer needle almost constantly @ the 8K position on the dial!!!!!

Furthermore, I did NOT reference any specific year of the FORD/MAZDA dual marketing campaign.  Therefore, I would suggest that in the future you carefully read the text, so that your facts are aligned w/ other's facts!


Al Klu
User Rank
Re: It pays to be mechanically inclined
Al Klu   3/29/2013 11:35:39 PM
Hi OC, FIRST, let me say...THANK YOU for replying to my post.  That was a first, and it is very nice to know that my comment was read!  I always wondered if these comments were mostly written between a small group of folks.  I've read many of your posts and agree with the vast majority of them.

Anyway, the article was originally written about a 1991 Mazda B2600i pick-up truck.  Your first post was a reply to Nancy that the "MAZDA pick-em-up truck is really a FORD RANGER" with the same platform as the FORD BRONCO II/EXPLORER" and then went on to discuss your 1989 BRONCO II whose ECU failed.  And then you tied your ECU to the MAZDA ECU by stating that it would not be surprising that your ECU's failure was also due to a substandard capacitor.

Then in your reply to dsm, you spoke about the B2000 pick-up truck.  In reality, the B2000 MAZDA pick-up was the carbureted version of the Mazda line (2.0 liter), the B2000 was enlarged to B2200 in 1987.  The B2600i pick-up was the fuel injected version of the same truck (2.6 liter).  When the MAZDA pick-ups were just re-badged FORD RANGERS in 1994, they became the B2300 (2.3 liter 4 cyl) and the B3000 (3.0 liter 6 cylinder).  In the response to dsm, you noted that "during this production lifetime" the B2000 was introduced, and the MAZDA TRIBUTE was a rebranded BRONCO II.  Note, earlier on, the MAZDA pick-up was a FORD COURIER, but the FORD/MAZDA partnership was dissolved in the 1983 model year, when the FORD RANGER debuted as a small truck, fully built in the US.

So, bottom line, I did read your posts.  Yes, FORD and MAZDA have merged and separated their small pick-up truck lines several times in the past several decades, but in the time frame being spoken about here , the FORD RANGER of the 1980's and early 1990's were separate vehicles from the MAZDA B-Series.

And the conclusion I reached from Dave's original post is that the root cause of the ECU failure was probably a design issue (wrong temperature range capacitor specified), which was not supported properly by MAZDA, hence the short supply of replacement ECU's.

As always, I appreciate your comments.

User Rank
Re: It pays to be mechanically inclined
jpratch   4/9/2013 5:30:04 PM
This "capacitor story " happened on equipment old enough to escape the great "Mid-2000 electrolytic capacitor scandal. It seems that some incomplete industrial espionage data was sold to a far eastern wannabe electrolytic capacitor manufacturer. The new electrolyte had higher water content and required buffering or passivation/protection of the aluminum electrodes. The "new" capacitor line was sold cheaper due to the lower cost electrolyte and was purchased and installed in a large number of electronic devices, especially LCD Monitor Power Supplies andLCD Televisions. Visio was one of the brands that was hit. My Visio 32" LCD TV died without warning and a quick google revealed the common nature of this failure. Sources of the offending Power Supply were identified as well. Except nobody had the Power Supplies in stock.

Further googling revealed on-line refurbishers, who had no Power Supplies in stock and did the repairsdirectly to your power supply.

Still further googling revealed a company selling kits of new capacitors AND instructions for a half dozen of the most popular power supplies. The on-line photos of failed power supplies looked just like mine with the handful of bulging caps in my power supply. This kit even included a length of solder wick. At $15 for the kit I figured that this old BSEE ought to be able to handle it. I had built Heathkits and the skills were the same. Two days later, with solder wick and soldering iron in hand, I set out to remove the bad and install the good. I put the bulged caps on a Capacitor Tester and all read less than 1% of the nominal capacitance. So with two hours of work, the LCD TV that has cost $1,100 in 2007 was back in service. Often, we engineers have all the knowledge and skills needed to fix many things all by ourselves. I have to admit the satisfaction of the screen coming to life again after the repairs sent goosebumps up my back.


User Rank
Re: It pays to be mechanically inclined
Tracz   4/24/2013 4:16:59 PM
For my case, I don't make a lot of money so most of my cars are the used one. I often tried to fix myself if the job doesn't make my hands so dirty, like changing oil or relating to safety issues, like changing the brake pads.

10 years ago, I had 1992 Mazda Protege. This car was broken because of water leaking into the ECM box. A shop mechanic inspected the car and showed me the water leak with his yellow colored flash light. He told me I had to call an auto wrecker to pick up the car. It's not worth it to repair or keep the car. But I was still curious about the computer box so I called Mazda dealer and looked up on internet for a refurbished one. Finally, I decided to search for a used one from several auto wreckers.  I bought a used ECM box of 60 dollars at an auto wrecker and replaced the broken one. The car worked well after replacing the computer box. I let my high school son drove the car to school until he graduated and sold the car (still running) afterwards.

Later on, my son 2000 Acura Integra had a broken power window. It took me a few months searching for information on internet and watching YouTube to decide replacing it. I paid 20 dollars for a used power window regulator.  To make sure, the man working at that auto wrecker also tested the operation of that part in front of me. It took me half of a day during Saturday to install the window regulator but that was a very enjoyable success.

I also have a 2002 Kia Spectra. It got a check engine error light on. I searched from Google and found out the error code. From there I also successful located the area of failure. I just went to auto wrecker and bought that used part. I paid 20 dollars for that part. I also opened the failed module and found out that the coil was burnt out. The coil was similar to the one I often saw at Radio Shack. Replacing that module took me only 15 minutes.  After replacing the failed part, I used a 50 dollars INNOVA 3030 Diagnostic Code Reader to reset. The check engine error light doesn't turn on after that.  If I let a mechanic do it, I would spend at least 500 dollars for the service.

<<  <  Page 5/5
Partner Zone
More Blogs from Made by Monkeys
Made By Monkeys highlights products that somehow slipped by the QC cops.
One reader had to dismantle the Mazda Tribute for the sake of changing the alternator and some spark plugs.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 12 - 16, Analytics for the IoT: A Deep Dive into Algorithms
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course June 28-30:
Sponsored by Stratasys
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service