HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Blogs
Made by Monkeys

The Bosch Spark Plugs Cost Me $1,000

View Comments: Oldest First|Newest First|Threaded View
Page 1/2  >  >>
Amclaussen
User Rank
Platinum
Fancy and Exotic spark Plugs... another myth for your $$$
Amclaussen   10/20/2011 4:41:00 PM
James and Rob: I fear that these 4-ground electrodes plugs malady if the result of young monkeys working feverishly in the Marketing and Engineering depts. at Bosch (or Siemens or any other)...

Multiple Ground Electrode plugs.

Developed in order to maintain the spark jumping from the central electrode at least onto one ground electrode in the dirty, oily-fuel needed in those two stroke grasscutting engines, back when ignition systems were notorious for their limited output...

BUT MORE THAN ONE single ground electrode only shrouds and shadows the flame front initiation, REDUCING the performance, certainly not enhancing it in any way. (Well, they may enhance the plug manufacturer sales!). Truly good old racing mechanics even used plug indexing to avoid the ground electrode shrouding the spark, the best ones by carefully choosing every plug from a big, big box; the lazier ones just resorting to "indexing-washers" (and losing the best placement of the firing end!).  BTW, real racing engines use NOT not even one single ground electrode, but a flat, round surface electrode around an almost flush central electrode, called "surface discharge" electrodes... No shrouding at all!

(It is a pity those only work at VERY HIGH compression ratios, extremely high RPM's, idling is over a few thousands RPM's, and a host of other conditions that are ONLY seen in truly race-designed engines (more like F-1...)

At a recent automotive industry Expo in Mexico City, I strongly questioned the salesmen from a (in)famous german company (you know which one) for promoting such a wrong product application: it only works better in 2-stroke oil-mixed fuel engines, not in a car engine, unless the car owner pretends to keep the same plug set for many years of use, in which case the extra ground electrodes could be of some help)... After explaining to them how the flame front is propated from the spark kernel and it initiates the combustion, finally the crowd assisting to the talk gave me their approval. Sorry, no more snake oil or gimmicks for me!


Another misconception is that those special metallurgy electrodes "produce extra power", when actually a thinner electrode can only produce a smaller spark kernel, and frequently is prone to overheating in Supercharged or turbocharged engines... causing pre-ignition. Turbocharged engine fans already have discovered this, and now favor the older plug designs with larger diameter central electrodes, the standard ones that still need to be changed more frequently in order to keep the engine working properly. There is NO free luch!

Iridium, Rhodium or even Gold electrodes do NOT produce more power (but could raise profits for the plug manufacturers, from overly enthusiastic power hungry but ignorant aficionados paying for them).  WHERE the platinum, iridium and similar metallurgy really get, is a much longer lasting plug, arising from their higher corrosion-erosion resistance, Perfect for installing and forgetting, but definitely NOT more horsepower or additional fuel economy!

The possible explanation for your 4 electrode plugs being eroded in a short time, is that the metallurgy of the ground electrodes was probably meant to "shed"  by itself, in order to "renew" its firing surface fast, and keep itself clean against the excessive deposits from the fuel with oil mixture needed in two-stroke engines, and proper when the ignition system is relatively weak (like those in lawnmowers) but NOT in a high energy car ignition!

Now, I'm not surprised that Bosch (and too many other compañies) are exploiting the looks of those 4-electrode plugs, as it appears that nowadays, engineers are being replaced by monkeys everywhere. ( I can almost hear the CEO's saying: If a two electrode plug looks good, a three one should look better... then a FOUR one must sell MUCH better, ok, so let's do it.  Wait! how about a FIVE one?)

 
amclaussen, Mexican Petroleum Institute.

Jason
User Rank
Gold
Re: Fancy and Exotic spark Plugs... another myth for your $$$
Jason   10/21/2011 9:28:14 AM
NO RATINGS
It is amazing at how true your statement at the end is Amclaussen!  It reminds me of a Gilette spoof commercial selling a 12 bladed razor.

 

Back to the topic however, it has never surprised me that companies have started going cheap on materials yet more complex on designs lately.   These plugs are just another example of what can happen when new thinking comes in, but old thinking stays for the materials side of things.  I am sure that when, or if, any simulations were done on these plugs that the performance was great!  However, I am sure that this was under ideal materials and probably didn't take into account imperfections at the plant level.

John
User Rank
Gold
mercedes
John   10/21/2011 9:28:58 AM
NO RATINGS
Troubleshoot.. troubleshoot.. troubleshoot.  Given the engine takes in air.. it can only be a problem of fuel delivery or spark and spark is usually easier to test.    Spark takes the path of least resistance so how could multiple conductors help.  If the plug is fouled.. inspect and determine why.

Anyway... biodegradeable wiring harness?  Really??  I have a 96 Cadillac and the factory battery cables are still in great shape. 

My folks had a 87 mercedes. diesel 4 cylinder and it has some odd things on it that could have been simplified.

Tex_J
User Rank
Silver
Re: mercedes
Tex_J   10/21/2011 9:43:55 AM
NO RATINGS
I ran afoul of the Bosch platinum plugs in a Chrysler engine.  One of their claim was low firing voltage.  Well it was in one polarity but not the other.  The Chrysler engine used one coil to fire two plugs.  Guess what.  That fires half of the plugs in reverse polarity.  The Bosch plugs only worked for a few weeks before I had misfires.

Dave
User Rank
Gold
A great car?
Dave   10/21/2011 10:22:23 AM
NO RATINGS
I had to chuckle after reading your post. You start by saying your Mercedes is a great car but by the time I was halfway through, I couldn't help but think I would never buy a Mercedes.

I've had one DOA AC Delco sparg plug over the years but can't recall one failing prematurely. But my old school general rule of troubleshooting is to start with the easiest to replace and least expensive component. Today, OBD diagnostics does a decent job of cluing you in as to what is the problem. That's saved me thousands of dollars in the last 10 years.

melllowfelllow
User Rank
Gold
Spark Plugs Cost You???
melllowfelllow   10/21/2011 11:25:03 AM
NO RATINGS
Two comments:

1. The vast majority of problems that occur on older vehicles are related to the last maintenance action [or vehicle 'event'] - incorrectly performed, 'failure root cause' not identified, incorrect parts, etc.

2. The ignition system is a SYSTEM. Replace any part of it with incorrect components - no matter how 'good' [or well advertised] they might be - is asking for trouble.

 

dot1dot2
User Rank
Iron
Re: Fancy and Exotic spark Plugs... another myth for your $$$
dot1dot2   10/21/2011 1:21:32 PM
NO RATINGS
I've never used the 4 prong platinum plugs but have had very good results with the Bosch single prong. Case in point: 1989 Saab 900 basic 4 cyl with old style distributor, was averaging 25-27 mpg, I changed 2 things, the plugs and the plug wires and consistantly got 33mpg for 1.5 years until I had a mechanic do a tune-up... was never quite the same after that. During the time of the great milage I had a long commute, 73 mi one way, and checked my milage every month.

I will add that my mechanic argued with me that the plug wires could not possibly impact milage but I put them in because the package said "saves gas"... these had an extra thick insulation and that is all I remember about them.

My daughters Saab 9000 could not use platinum tip plugs due the the setup with a coil for each plug... the mechanic said we would burn up the coils in a week.

 

 

 

BobGroh
User Rank
Platinum
Re: Fancy and Exotic spark Plugs OR the perils of self-diagnosing
BobGroh   10/21/2011 3:23:25 PM
NO RATINGS
Ah, the weakness of the proud and haughty engineer type.  We are, for the most part, the self-confident fixer's of all the 'things' around us - well, at least the physcial things.  And sometimes our wandering outside our areas of expertise costs us a few bucks (like your $1,000 spark plug job).

In my case, my downfall (or at least the one of the many over the years) is my mis-diagnosis of Maytag clothes washer problem.  Our washer was fairly old (about 15 years old) and I had done a few simple repairs to keep it chugging along. This time the complaint was that the washer would fill up with water but then would not agitate.  So I checked out the wiring diagram and decided that the water level pressure switch - the switch is a very sensitive air pressure switch connected, via a tube, to the tube.  Increasing water level equals increased air pressure in the tube which, at a certain water level, would activate it.  The switch was in series with the motor start so nothing happened if the water level was too low OR the switch failed.

So I ran a small load with no clothes - just water.  When it got some water in it, I shorted out the switch leads and everything started up and ran.  Fine - says I - must be a bad switch.  Ordered one ($75 ka-ching) and when it arrived installed it. 

Ran a test load with a low water level, everything worked great.  Ran it again with a test load with a full water level, motor came on and ..... grunt.  No agitator action. And the thermal breaker clicked off.

Turns out the problem was a failing bearing in the agitator - Not completely failed - just dragging enough that the agitator would work with a low water level (and no clothes) but would NOT work with more water OR with clothes. A quick conversation with a repair person - way too expensive.  Our solution - buy a new washer. 

Anyone need a water level switch? I've got two of them.

 

MIROX
User Rank
Platinum
Re: Fancy and Exotic spark Plugs... another myth for your $$$
MIROX   10/21/2011 4:06:46 PM
NO RATINGS
I have previously commented about my possitive Experience with the BOSCH +4 platinum plugs.  BOSCH had platinum tipped plugs way back in WW II for use in aircraft engines (with magneto ignition).

It was not till about 1980's they made them in sizes for Automotive uses (with single ground electrode.

Then they introduced the +4 and only latter on +2.

When you look at the +4 design you find that the ground electrodes are to the side of the central electrode and thus do NOT "shroud" the spark, which as pointed out actually happens even with single ground electrode that is ABOVE the central electrode (and only the central electrode is platinum or platinum coated).

The early plugs were in $5.00 range (that is in 1985 when I bought a lot of them, and still have at least 4 sets left over, as I though they would need to be changed eventually).

Today at the price of platinum I doubt the central electrode is 100% platinum wire, perhaps it is only "coated".

Or else how could they sell these plugs for just under $2.00 ?

If the same amount of platinum was used as apparently was back in 1980's then each plug just on the platinum cost should retail for $25 to $30.

I knwo some dealers charge $$$ for replacing of OEM plugs at 100,000 or 120,000 miles but most of that cost I believe is the fact that on some V6 engines you have to disasemble better part of the vehicle jsut to get to the "back" plugs of FWD car.

 

 

 

 

 

oldtimer8080
User Rank
Gold
All system components could be suspect
oldtimer8080   10/21/2011 5:10:06 PM
NO RATINGS
The NEW plated " special power producing plugs are JUNK ".

The original platinum wire electrodes in the plugs used by aircraft and racecars worked. The engine HEADS WERE DESIGNED FOR THEM!!! The center electrode WAS PURE PLATINUM, NOT PLATED!

With swirl technology designed into the ignition chamber on modern cars, you have to use single or dual side electrodes, anything else impedes the flame front with reductions of engine performance.

One other suspect not mentioned: most engines USED to have copper core ignition wires to the spark plugs. Radio noise suppresion had the manufacturer installing CARBON CORE wires. These carbon core wires are more delicate....and actually REDUCE the power to the spark plug. Then also tend to find the weakest link ( better ground ) to send the energy to.The carbon core develops gaps and burnouts of the insulation...

My XJ12 had an itermittent high RPM miss. Americanizing ALL the ignition parts in the system ( Crane Cams XR700, Accel coil, MSD wires and single electrode plugs ) cured the problem.

To see if you have a similar problem, just open the hood and see the light show around the components....

 

P.S. The OFFY used the platinum plugs. I've changed a few sets in my time.

 

Page 1/2  >  >>
Partner Zone
More Blogs from Made by Monkeys
Made By Monkeys highlights products that somehow slipped by the QC cops.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Made By Monkeys highlights products that somehow slipped by the QC cops.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service