Tesla Motors will blend the qualities of a sport utility vehicle and a minivan in an all-electric car that's targeted to hit the streets in 2014.
Known as the Model X, the new vehicle will seat seven, offer a 17-inch touchscreen in the front seat, and feature "falcon wing" doors that enable passengers to easily walk into the vehicle. A concept version of the Model X appeared at the North American International Auto Show in Detroit last week.
"Tesla is all about clever solutions," Tesla designer Andre Franco told Design News. "We look at the market and try to find ways to improve on what's already there."
For now, Tesla is saying little about the vehicle's technical specifications. Driving range is as yet unknown, but the Model X will offer a lithium-ion battery pack, sized between 60 kWh and 85 kWh. By comparison, the Tesla Model S that came out in 2012 offered a 60-kWh battery with a 208-mile (EPA) range, and an 85-kWh battery with a 265-mile range. The proposed Model X is expected to offer a range somewhere between those two.
Click on the image to check out the Tesla Model X.
"Falcon wing" doors on the X open upward, but not outward. The design enables adults to walk into the vehicle, instead of crawling in. (Source: Tesla Motors)
The Model X will also offer optional all-wheel drive, which the company says will boost torque by 50 percent. Featuring an additional electric motor-gearbox package about the size of a duffel bag between the rear wheels, the all-wheel-drive version of the X will reportedly accelerate from 0 mph to 60 mph in under five seconds, which would place it among the fastest SUVs on the market.
The new vehicle's most unusual feature, however, may be its availability of so-called "falcon wing" side doors. Using a hinge between the glass roof panel and the side door, the falcon wing opens upward, without swinging outward.
"It's a re-imagination of the sliding side door on a minivan," Dustin Krause, regional sales manager of Tesla, told Design News. "With a traditional gull wing door, you wouldn't be able to park alongside another vehicle because there wouldn't be room to open the door. This gives you room to enter, without interfering with other vehicles."
Indeed, Tesla representatives at the show demonstrated how the falcon wing feature allows an adult to stand in the middle row, while offering easy access to the second and third rows of seating. "The intention is not to crawl into a car, but to walk into it," Franco told us as he stood up inside the car's open door. "So you don't have to cantilever yourself to put a child in a car seat."
At the show, Tesla also showed off a touchscreen that measures 17 inches, diagonally. The touchscreen will serve as a traditional front console display, but is expected to appeal to drivers who are already familiar with touch technology on their phones and tablet computers. If the 17-inch size reaches production, it would be the biggest touchscreen in the auto industry by about five inches. "Touch technology is becoming commonplace, and we thought it needed to be inside our vehicles," Krause said.
Production is set for 2014 in Tesla's Fremont, Calif. plant. Pricing is not yet known, but could be in the same range as the Model S. The vehicle is expected to be targeted at buyers of SUV and minivans who are looking to go electric. "This is about taking the flexibility of a minivan and adding a little more flair," Krause said.
I suppose it depends on how you define "equal," TJ McDermott. If we're talking about acceleration, performance, comfort, etc, EVs are already there. In many cases they have surpassed conventional IC-based vehicles. If we're talking about range, refueling time and cost for comparable performance in those areas, however, there's nothing out there to indicate that the EV will catch the gasoline-burning car in the near future.
A 17 inch touch screen would seem to be a distraction. Perhaps voice commands could be used to provide input, as the driver would not have to divert his attention from the roadway.
NiteOwl, I agree with you that the screen will be distracting. Perhaps a cover for all but the top three inches or so would be good. You could slide it down when you needed to do something involving the rest of the screen. It does seem to have an instrument cluster as well, so this probably is not info needed for driving.
One problem you might run into with the doors is clearance. I don't have enough information to know if this would be a problem, but it could.
You're right about having clever designs, and that worries me. Or not. If they're that confident that their EV will be the equal of a regular car, then the bells and whistles they're touting here will help them.
I'm worried that they're using the nifty features to mask the failings of the actual EV.
I like the article and I love the Falcon wing doors. If they work well, maybe we will see those on other vehicles. The rear most seats appear to have zero leg room or is that just an illusion? I wonder if that 17" screen will be too distracting for the driver?
I noticed that image 5 in the series appears to be a Model S instead of the X, but I could be mistaken.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
25 
