Jeremy Michalek says the biggest electric vehicle subsidies are going to the wrong cars. After studying the life cycle of electrified cars -- from the first moment of raw material mining to the final day in the car's life -- Michalek and fellow researchers have concluded that hybrids with smaller batteries pollute less than pure EVs.
That, of course, flies in the face of everything we now believe. Today, cars with bigger lithium-ion batteries receive three times as much in federal subsidies than hybrids with smaller batteries. Those subsidies, however, are based on the idea that big-battery EVs pollute less, which may not necessarily be so, Michalek says.
A battery electric vehicle (shown as "BEV240") could be responsible for more social damage in the form of emissions than a plug-in hybrid, largely as a result of battery size. (Source: Carnegie Mellon University)
"As the battery pack gets larger, the emissions associated with manufacturing can be quite significant," Michalek, an associate professor of mechanical engineering and public policy at Carnegie Mellon University, said in an interview. "You have to look at the entire supply chain. Some of the emissions come from the facility where the battery is assembled, but a portion of it is upstream. Some of it comes from the powerplants used to create the electricity that runs the equipment."
Michalek's conclusions were recently published in an article in Issues and Science and Technology, a publication of the National Academies. They were also unveiled in a separate study titled "Valuation of plug-in vehicle life-cycle air emissions and oil displacement benefits," in 2011. For both papers, Michalek teamed with researchers from Arizona State University and the Rand Corporation.
The gist of the studies' conclusions is that there's more to emissions than what comes out of the tailpipe. This is especially so when it comes to vehicles with big lithium-ion batteries. According to the studies, a battery-electric car with a 240 km (144 mile) range is responsible for between $4,000 and $5,000 worth of "social damages" over its lifetime. The figure is similar to conventional gas-burning vehicles, but higher than that of hybrids.
A plug-in hybrid with a 20 km (12 mile) all-electric range, for example, comes in at less than $4,000. In arriving at the numbers, researchers considered emissions caused by vehicle operation, as well as by electricity production, gasoline production, battery production, and vehicle production.
The bottom line of the study is that smaller battery size is important. Although the studies didn't mention any specific vehicle models, their findings indicate that a Prius PHV plug-in hybrid with a 4.4 kWh battery would emit less than a Chevy Volt with a 16 kWh battery. Similarly, a Volt would emit less than a pure electric car with a big battery.
Yes, and besides having a whole lot of natural gas underground, there are some lower cost ways to generate natural gas from municiple garbage. So we may be able to solve multiple problems at the same times. That would be quite handy.
And consider a car with the stop-start system and also fueled by natural gas. Low emissions plus great mileage.
Why not just live in tents in the woods and cook with "solar cookers". If you live in the "woods" you don't have grass to cut (lawn mower polution) and wouldn't have to polute the air by driving at all because there won't be any jobs to go to from the auto makers, home builders, lawn mower manufacturers or oil companies. The only expense you'll have is the daily trip to Starbucks (where I'm currently residing) Not to mention all the money we spend protecting the shipping lanes around the middle east to get the oil over here. Coal won't be poluting because you can't heat your tent with coal (as far as I know). The tent can be lit with a single 13 Watt CFL or LED lamp from China so the polution from the manufacturing of those will be 12,000 miles from here. Summers in certain areas (and Winters in others) will be miserable due to the lack of heating and air.
While you're at it each family tent will have it's own garden (organic of course). If you become a vegitarian you won't even have to kill/murder chickens, cows, goats, etc. unless you consider the killing of a tomato to be in-humane cruel and unusual punishment for the tomato plant.
I think on Arbor day, I'll go out and cut down a damned pine tree.
Rob, A whole lot of electricity is being produced by gas-fired power plants these days. Not only does it cause much lower emissions, it also costs less to use.
Until "social damages" gets a bit more description I am inclined to regard it as just another chunk of blather. Made-up negative sounding words are what kids do. What is clear about the electric vehicles is that they certainly will be much more difficult to service and much more expensive to repair. The much higher repair costs will be due to both a lack of qualified repair people, and the fact that all of the information needed to diagnose the drive systems will only be available to the dealers. All other service people will not have any way to get hold of any service information. And of course the dealers hourly service rate will be much more than it is now, probably about $250 per hour. Just consider that! And, of course, any repair parts will be privately numbered and only available from one source.
Next comes the battery, which is both heavy and very expensive. Sort of like having your engine replaced, except that it only takes an hour, but it still costs $7500. Of course, battery life will be reduced quite a bit for the folks who use their air conditioning. AC will reduce that 12 mile range down to 5 or possibly 6 miles, so you really do need to think carefully befor switching on the AC.
None of this has talked about what happens when a bunch of folks on the same block and distribution transformer all charge their car at 2 AM.
Of course it may not be clear to all that I am talking about GRIEF emissionsrather than "carbon equivalent" ones.
Aluminum, copper, iron, lithium.....seems like pretty benign and recyclable stuff to me. I would think it would be more recyclable than an IC vehicle just by sheer component count reduction.
Good points, Irishmuse. I'd like to see more nuclear. The Japan earthquake put nuclear off the table for at least a generation. Even Europe -- which benefited well from nuclear -- is getting ready to decommission nuclear plants.
The other elephant in the room is maintenance of the vehicles. The primary thing is the replacement/disposal of the battery(ies), they don't last forever. Then there is disposal of the vehicle at the end of its useful life. In other words the total life cycle of the vehicle.
The costs are good but the impact to the environment is the justification for the vehicles. Disposal of batteries, even creation of batteries, puts a lot of load on the environement. I'd like to see the analysis on that as well, it might be very enlightening.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.