A haptic feedback technology from Continental Automotive provides a pulse signal to dashboard buttons, thus enabling drivers to feel the controls and focus on the road ahead. (Source: Continental Automotive North America)
I use voice recognition Blue Tooth linked speakerphones in my vehicles to provide full control of my cell phone which can remain in my pocket. And I've always had 2-way radios which require the use of a hand held microphone with a push to talk switch. In both instances with a little practice, one can minimize the degree of distraction by cultivating good multi-tasking habits. Problem is, you do have to practice to hone those skills. And recent studies have shown that even a hands free cellular conversation is a distraction from the primary task of driving. The more we multi-task, the less cognitive power is available for each task.
So, the best way to compensate for a reduction in road environment/vehicle control awareness is to add technology that will raise safety margins by adding some self piloting capability to the vehicle itself.
I have to disagree with you about haptic feed back being useful here for secondary controls. Haptics in touch screens inform the user they touched the screen, but you still have to look at it to see what specific spot was touched because a touch screen feels the same all over.
My opinion: Secondary controls (audio and climate, lights, etc.) should not require fine muscle control to operate and should be identifiable in peripheral vision and by touch. Neither is possible with a touch screen. Touch screens should be left to control only those things that are normally set and left alone.
I can see modifying my opinion regarding voice control, but I've not had experience with it yet.
The coffee icon made me laugh. Can you imagine if somebody borrows your car and they don't know what the coffee icon is supposed to mean? They might start checking the cup holder for a fresh brew.
Yes, Chuck, I was so impressed by the hands-free voice recognition, it makes me wonder why so much effort is being put into the systems in your slide show. Although, the systems in your slide show are pretty cool to see.
Make cars less safe? Hilarious!! I'm lucky enough to be in Generation-X and remember cars that didn't have seatbelts but love the new technology too. One of my best memories growing up is playing with dolls in the back of my mom's Pinto. The big window was awesome!
I don't know if kids today are missing out on the fun but there has to be an in between. Technology needs a balance of personal responsibility on the users part in order to progress.
Back when rally racing was aired in the USA, I thought it fascinating that rally racers have navigators that could reference a map if need and tell the driver exactly what is coming up while traveling around 100mph on a usually unpaved road. I think a system like this is a better answer than proximity switches and voice recognition devices. The driver has the option of muting the audio, but it comes back on as soon as a button on the dash is pressed unless the stereo is on and it would tell the driver straight-away and turn information using GPS and the car has a device that can notify the driver of objects around the car and notify the driver of there speed and distance from them. All this could use road sign style symbols on the HUD and the stereo speaker system to notify the driver.
All these solutions are still part of the problem: visual distraction. The system should be voice recognition with audio response. Then your eyes are always on the road where they belong.
Yes, naperlou. We need to borrow from aircraft. The single seat fighter pilot is the most distracted driver in the world and flys in formation yet!
HUD is a mainstay for them - and training. And those who cannot do it, do not fly. Why should it be any different for driving? Every driver must be trained to know their limits and abide by them.
Couldn't agree more with you. My car doesn't have a radio and I completely agree. Same when I ride my bike (either motorcycle or bicycle).
The other alternative I have is a bit unorthodox, but it would work; make the cars less safe! If you take out the safety devices from the car, people will think twice about being distracted because there is no cushion of safety. Too many people that I know are very flippant about driving because they are not worried of getting into an accident because chances are good that they will not get hurt in an accident and that insurance will pay for a new car. So the consequences are very minimal for bad driving.
Advances in voice recognition are amazing, Rob. Ten years ago, VR systems only understood a few words from a very small menu. Now, they can run radios, entertainment systems, HVAC systems and mobile phones. They've come a long way.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
20 
