By-wire also offers important advantages for vehicle manufacturers. Elimination of mechanical systems could cut weight and could more easily enable automakers to switch a car from a left-hand-drive to right-hand-drive, so it could be sold in other countries.
The transition to steer-by-wire has been a long-awaited one. As far back as a decade ago, auto industry engineers looked forward to the addition of steer-by-wire and brake-by-wire technologies but hesitated because it was believed that 42V electrical architectures would be needed in order to make it happen. "You can't do steer-by-wire with a 12V system," one veteran industry engineer was quoted as saying in a 2001 Design News article. "For steer-by-wire, 42V is absolutely essential." At the time, engineers estimated that steer-by-wire would draw as much as 1.8kW, which they said would necessitate use of better alternators.
Infiniti did not say what changes had enabled the use of steer-by-wire in its cars, but the company did say it is not depending on the higher-voltage of hybrid electrical architectures to make it happen. "We've not announced what vehicles it will go into, but it has been demonstrated in a conventionally powered car, not a hybrid," Bazemore said. "So you can reasonably assume that's how we'll offer it."
I think this a prellude to driverless cars. The more you disengage the driver from the mechanics, the easier this becomes. You have to get people used to the idea that the car will steer or do other things without the actual "feel" of the driver input. "Enhancing" the feel of the car, is rubbish. Take away the power steering, now that is "feel". Drive by wire is necessary for automated robotic driving. Personally? not for me.
We are reaching the point where when a car gets a few years on it, what is a relatively minor failure now, like a power steering rack or a brake booster, will be so expensive to repair it effectively makes the car a total loss. This will adversly affect resale value. As an example, take a common 2002 to 2005 Buick LeSabre. The Limited with all the bells and whistles, often can be had for the same or less than the much simpler custom trim version.
You could look at going to a centerstick, side stick system like the X-15 used.
Have the center stick be the computer driven controller but you can reach over and yank on the side stick to get some steering inputs, and if it's over on the side it may package up nicely especially if it only needs a relatively small movement.
I first saw an electric power steering system implemented in an advanced prototype my employer was asked to simulate in 1978 or 79. The design had a hollow armature servomotor driving a ballnut on a ballscrew rack that went thru the center of the motor to assist in steering and sensed the need for assist just as a hydraulic system does, by sensing the windup of a torsion rod at the pinion. It was an electric servo instead of a hydraulic servo. It seemed to work just fine, although if you turned the wheel rapidly you could feel the inertia of the servomotor.
My concern then was that the mechanical backup mode operation required backdriving the servomotor thru the ball screw-nut. That is fine when it is new, lubricated and smooth, but if the screw or nut has fatigue damage, corrosion and or contamination it would still probably work OK under power but it might not manually backdrive at all. To my knowledge, the hydraulic system doesn't have a failure mode that locks up the rack and pinion precluding manual operation.
That concept was a very compact affair, but it seemed to have a fatal flaw. I wouldn't want it in my life. How does this system deliver power assist from servomotor to the rack? Not much engineering detail given. Not in fashion.
Having experenced a failure of ABS the dealer told me could never happen, drive by wire scares the hell out of me. My ABS on a GM product would wait untill travling more than 32 mph before totaly disabling all brakes. I don't believe the automakers are willing to dedicate the necessary resources to developing the same safty protocals the aviation industry has. Besides, if anything goes wrong just pull over to the side of the road, oh! wait maybe that won't work.
If you want to experience just how difficult anti-intuitive steering can be, try this experiment on a bicycle. After you get rolling along a straight clear path, grb the right-hand grip with your left hand and try to kep going straight. BUt be certain that your helmet is on correctly before doing this experiment.
Going to a non-intuitive steering method could be a real disaster.
I can certainly agree that maintenance and proper repair must be concerns relative to this technology. The days of the shade-tree-mechanic are over forever with systems as sophisticated as this one. I think back-up systems are an absolute must until enough reliability data and "road experience" are available.
Tell you what: I'll buy if I see it win a race in a major event. Any of the big ones: Indycar, NASCAR, F1, F2000, GT, Paris-Dakar, whatever. If you show me a race team using drive by wire for a season and winning, then I'll buy it.
If the technology is so great then show me. Any race team would love to shave weight, reduce parts and 'enhance' the driver's road feel. Also the drive-by-wire could deliver a lot of data to the race team computers. I can see how it would be a huge advantage.
I am not sure if there is a better way to steer a car than using the steering wheel. Consider that it never gets lost, and it is positioned so that it can be turned by either hand. Also, the motion is intuitive to almost everybody-turn the wheel right to turn right, about as easy to figure out as possible. If there were an electrical control for it, we might wind up like we are with seatbelt buckles, with a bunch of different kinds, and some of them are really TRASH, in that they are hard to connect and impossible to release wearing heavy gloves. Just think, they all started out just like the seatbelt buckles in airplanes.
Steering could wind up being a function on that same stupid big red button that is used for start and stop on some inferior brands of cars.
Lithium-ion battery prices will drop rapidly over the next 10 years, setting the stage for plug-in vehicles to reach 5%-10% of total automotive sales by the mid- to late-2020s, according to a new study.
Advanced driver-assist systems (ADAS) are poised to become a $102 billion market by 2030, but just a sliver of that technology will be applied to cars that can be fully autonomous in all conditions, according to a new study.
Using a headset and a giant ultra-high definition display, Ford Motor Co. last week provided a glimpse of how virtual reality enabled its engineers to collaborate across continents on the design of its new GT supercar.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.