Never in the history of the automobile have engineers worked so hard to use so little fuel. With a 54.5mpg corporate average fuel economy mandate looming in the next 12 years, all have begun development of new technologies that will help cut gasoline consumption. Many new engines now employ direct injection fuel delivery, cylinder deactivation, and variable cam timing. Some use turbochargers to provide a boost only when it's needed, thereby minimizing engine displacement. Many companies are also building transmissions with eight or more speeds as a means of wasting as little energy as possible.
Here, we offer a collection of some of the engine and transmission technologies shown at the recent 2013 North American International Auto Show. From tiny three-cylinder engines to massive V-8s, it demonstrates that fuel efficiency is the biggest motivator for automakers going forward.
Click on the image below to start the slideshow.
GM's 6.2L V-8 delivers 450 HP and 450 lb-ft of torque to the 2014 Chevrolet Corvette. It employs a direct injection fuel system, active fuel management, and variable valve timing. GM engineers used computational fluid dynamics to optimize the combustion system and ensure a more complete burn. (Source: Chevrolet)
The auto companies are still stuck in their old way of thinking. The primary sales tactic that they have used to sell their cars is by defining "improved" as having more HP and faster acceleration. Granted the Corvette is a specialty car, being sold based on performance. However maybe chopping some of the fat off of it's 3200 lb frame with some advanced materials might not require 440 hp to move a bit quicker...
Only about 12% of the energy burned by a "modern" car translates into motion, that why they have such gigantic cooling systems. Hopefully the companies will use their time and money wisely and not just try to "run out the clock" before the 54mpg standard kickes in.
One point made about driving habits improving mileage is well taken. However human nature is hard to change (I can't get my wife to lighten up her lead foot for example as long as I'm paying for the gas and repairs) but the self drive car could very well change that especially if it includes networked roadways whereby the cars communicate with each other, maybe even "drafting" safely to save fuel.
Thanks for that Jim_E! Wow... I love learning new stuff. I had no idea that GE made traditional reciprocating engines. Shows how biased I am from working with the Air Force... the only piston engines from GE I saw were housed in the Air Force Museum.
Perhaps I confused GE with General Dyamics (GD)... Their M1 Abrams Tank uses a gas turbine engine and I mistakenly thought they had borrowed that technology from Locomotives (it's a heavy, freaking tank after all). A quick visit to ge.com reveals that their modern locomotives use a 12-cylender diesel engine. Thanks for the reality check!
Looks like the Gas Turbine-Electric Locomotives peaked in the 1960s. I guess I'm only missing 50 years of technology... =]
Being a huge railfan, I have to tell you that modern diesel electric locomotives do not have turbines. They feature traditional piston driven diesel engines connected to an alternator. I believe the the General Electric locomotives feature four stroke diesel engines, while the Electro-Motive Diesels (a.k.a EMD) (formerly owned by General Motors) feature two stroke diesel engines. Both manufactures utilize turbo charging.
I sure like the sound of the EMDs better than that of the GE's.
It was interesting that there was a horsepower race by the locomotive builders about ten years ago, and it ended with both companies making 6000 horsepower locomotives. Ironically, they both seemed to have problems and lost favor with the railroads. They both now produce their largest units with about 4500 horsepower, which seems to be the sweet spot. Since additional locomotives can be attached together to be operated by lead locomotive (MU'd meaning Multiple Units), more locomotives can be added when they need extra power.
GTOlover, this is one of my favorite Wikipedia Pages http://en.wikipedia.org/wiki/Energy_density. I agree with you in separating the variables. One is the variable of how much Total Energy can you carry on board in the form of fuel while you are traveling and a second variable is how efficiently can the energy in the fuel be Converted into kinetic energy of the vehicle. I think the automobile industry is currently suffering from the "Opportunity Costs of Legacies". We've been doing the same thing for such a long time that it is proven technology, accepted by the regulators, entrenched in our supply chains, and there is a huge activation cost for thinking outside the 20th-century box. We don't keep an account of Opportunity Cost, but I would anticipate that the cost savings we are missing out on by drowning in our current technological inertia would far outstrip the actual costs of not innovating...
Looking at some of the MPG ratings that are stated in the slideshow, and checking some online, where is the fuel economy? I have a 1990 GMC Suburban 5.7L that I can get upto 20 MPG by just using good driving habits to maximize mileage. I have a 1968 Tempest with a 5.7L that I have been able to get 21 MPG with good driving habits. I realize that these would get even better mileage by using the same driving habits. But the cost of this research and development is improving thesevehicle MPG by about 5 - 7 MPG. That is 20%, not bad, but still a long way off from 51.4 MPG!
I got to thinking, what is the energy content in one gallon of gasoline and how much work can it generate to move a 4000 pound vehicle? The process of electrification is only covering up the conversion problem. As William pointed out, how about optimizing the conversion by using turbine poweres generators. Seems this is a idea that needs some more thought.
Thanks for that tekochip. That's why I'm wondering why we don't use turbine technology to charge / recharge the batteries of a modern hybrid. Not being an engineer, I find statements like "the relatively constant torque of an electric motor, even at very low speeds tends to increase acceleration performance of an electric vehicle relative to that of the same rated motor power internal combustion engine" (Wikipedia) promising. Instead of developing new transmission technology to mechanically couple the output of the turbine to the differential, it seems an obvious mashup to use an efficient turbine to generate electricity for a modern electric car.
And Chuck, all the more efficient if we use diesel. I've read of several "gas" turbines that accept methane, gasoline, kerosene, diesel, and Jet A. Now I just need to develop one...
"The Jaguar C-X75, the concept that debuted at the 2010 Paris Motor Show, is an electric hybrid that uses two small gas-powered turbines to generate electricity when the battery is low. Looking at the stats, it's an impressive ride: an estimated fuel economy of 41.1 mpg, 778 horsepower, 0 to 62mph in 3.4 seconds, and a top speed of 205 mph."
Personally, Bill, I'd be happy just to see the U.S. car industry make more use of diesel technology. Diesel fuel has about 10% more energy per volume than conventional gasoline. The problem, though, is that diesel engine technology is more expensive. One industry engineer told me that the base diesel engine is about 2X as expensive to make as a regular gasoline engine.
The most famous turbine engine, of course, was the one in Parnelli Jones' car at Indy in 1967. The car left the race with three laps to go when a transmission bearing broke. I believe turbine engines were barred from Indy races afterward.
I believe Chrysler had a turbine car in the early Sixties. It had a number of new technology problems, but I think the biggest issue was that a turbine engine needs to spool up, so acceleration was rather poor. If only they made merge lanes as long as runways.
Some cars are more reliable than others, but even the vehicles at the bottom of this year’s Consumer Reports reliability survey are vastly better than those of 20 years ago in the key areas of powertrain and hardware, experts said this week.
As it does every year, Consumers Union recently surveyed its members on the reliability of their vehicles. This year, it collected data on approximately 1.1 million cars and trucks, categorizing the members’ likes and dislikes, not only of their vehicles, but of the vehicle sub-systems, as well.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.