General Motors rolled out the battery-powered Spark EV on Wednesday, marking the first time it has introduced an all-electric car since it scrapped the infamous EV1 a decade ago.
The $25,000 mini-car-sized Spark EV will be targeted at US and Asian buyers and is expected to help GM meet California's Zero-Emission Vehicle (ZEV) mandate. It also reinforces a commitment to plug-in cars that GM has repeated over the last several years.
"We're taking what we've learned in the EV1 and the Volt and using it in the Spark," GM spokeswoman Annalisa Bluhm told Design News prior to the rollout at the Los Angeles Auto Show. Bluhm added that 40 percent of the components in the Spark's motor are used in the Volt motor and much of the Spark's battery technology builds on lessons learned from the EV1 and Volt.
Click on the image below to check out the Spark.
Unveiled at the Los Angeles Auto Show, the 2014 Chevrolet Spark EV uses a GM-designed, coaxial drive unit and electric motor that deliver 130 hp (110 kW) and 400 lb-ft (542 N-m) of torque. (Source: GM)
The new five-door electric car will employ a 20-kWh lithium-ion battery from A123 Systems Inc. that will give the Spark "one of the best EV battery ranges in its segment," GM said. With its 130-hp permanent magnet motor, it will go from zero-to-60-mph in eight seconds and will be the first vehicle to employ the new DC fast-charging standard from the Society of Automotive Engineers (SAE), which will enable it to reach an 80 percent battery charge in 20 minutes at public charging stations. Using a dedicated 240V home outlet, it will charge in seven hours.
Inside, the vehicle will employ two high-resolution, seven-inch, color LCD screens; a MyLink radio for infotainment; and apps for navigation and global Internet radio.
The vehicle's 20-kWh battery is slightly larger than the Chevy Volt's 16-kWh battery and smaller than the Nissan Leaf's 24-kWh version. GM did not reveal the car's all-electric range, saying that it is awaiting EPA estimates.
The use of the A123 nanophosphate battery came as a surprise to some, given the fact that A123 filed for bankruptcy in October. GM had said in 2011, however, that it planned to employ an A123 lithium-ion battery. "The bankruptcy proceedings have no effect on the development of the battery," Bluhm told us.
Since announcing the Chevy Spark in late 2011, GM has said the vehicle will be partially targeted toward buyers in Asia, where smaller vehicles are more accepted. "When you get into the mega-cities and the shorter driving commutes that they have in those regions, the Spark EV might be a better fit than a vehicle like the Volt," a GM spokesman told Design News in 2011.
Industry analysts believe GM's introduction of the Spark EV is also an effort to comply with California's looming ZEV mandate. "There's an argument that they're selling them in markets outside California, so it's supposedly not just a compliance issue," Kevin See, an analyst for Lux Research, told Design News. "But the ZEV mandate really is the primary reason for rolling it out. Obviously, that's why it's coming out in California first."
The rollout comes at a time when battery-electric vehicles are still struggling. A study by J.D. Power released in November contended that American consumers still have little interest in EVs, and will continue to be uninterested for some time to come. Nissan sold just 6,791 Leafs through October, according to caranddriver.com.
See believes that the low sales figures will continue with the Spark. "My response is a shrug of the shoulders," See told us. "They're not going to sell a ton of Spark EVs."
Cap'n, just as the EV-1 was created to satisfy the California mandate, this one will as well. With a 20-kWh battery, the range will probably be under 100 mi. This is just a commuter car. I say this about the range by comparison with the Tesla Roadster, which has a 53-kWh battery. That car has a reasonable range, but you still have to worry about finding charging stations.
It is important for the car companies to build and sell these types of vehicles, if only to collect data on the type. On the other hand, you won't make money on them. Once battery technology improves dramatically, or fuel cells become practical, this will change. That may be a ways off.
Thanks for the slide show! The interior looks great. Nicely done. The body, like most EV's and hybrids, is stale and unattractive. With the exception of the first car from Tesla, there's nothing inspiring on the road.
EVs have to do better than 100 miles per charge going forward. As a Californian, that may not be enough for a very busy day. Especially down south in the Los Angeles area. This is a BIG state.
Naperlou, many auto execs agree with you. Several of the vehicles coming out now are regarded as "compliance cars" -- cars that are being built to satisfy the California ZEV mandate. That would include the Fiat 500e (story to appear soon).
Not being from the West Coast, how does that mandate work? Do the manufacturers only have to have a certain percent of their fleet available as ZEV, or do they actually have to find buyers for a percent?
It is surprising that they are introducing this without mentioning range. While you can get away with waiting on some features, one would think that range is still one of the first questions that would be asked by anybody even remotely considering one of these.
Most of the states that have or are in the process of adopting emission standard regulations are on the east coast. California has the strictest standards. Other states are looking at following CARB.
The website-How Stuff Works has a pretty comprehensive explanation.
Nice to see A123 getting some use. It's ability many other Lithiums don't have of very fast charging is a good advantage.
The Cal mandate also applies to IIRC 13 other states that have adopted it.
Because of it's lighter weight, thus rolling drag, 20kwhrs might get it more than 100m mile range.
As far as range 60 miles handles 90% of US car trips easily. Yet all these need for this size EV is a 10kw generator for unlimited range. They all should have a space designed to use such as a well done one need only weight 50-70lbs or so.
I just built one at 4.5kw in 40lbs using a stock engine. Could even fit on a trailer hitch and owned or rented for longer trips would make it a one car small family, stident or retiree vehicle that costs little to run.
Along with range, they didn't mention how that the car is heated or cooled. Isn't that a factor? I keep wondering about the draw from the heater/AC in an EV. But it is never mentioned.
I guess we could live with AC....I did while growing up and never minded. But here in the northern and mountain states a heater is a necessity half the year. For that matter, in parts of Calif. as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
25 
