Multi-Pixel Technology also uses the principle of optical triangulation that is utilized with SPT sensors. However, MPT sensors make use of not a single threshold between receiver elements, but many more, even up to 128 thresholds. While SPT sensing detects up to a certain distance but not beyond that, MPT sensing can also define sensing windows within which objects are sensed. MPT sensors are flexible enough that multiple distances can correspond to multiple outputs of the same sensor. For example, an SPT device could detect pill bottles or medical syringes closer than 65mm. But an MPT device could also detect those bottles at a distance between 48mm and 65mm, or it could trigger one discrete output when something is closer than 48mm and another output when something is closer than 65mm.
Pulse Ranging Technology is a method of distance measurement. PRT offers continuous information on the distance from the sensor to the observed object. It utilizes very high-intensity bursts of light that leave the sensor’s emitter, are reflected by the sensed object, and are detected by the sensor’s receiver. Based on the amount of time for the light to be emitted and to be picked up by the sensor’s receiver and using the speed of light in air as a constant, the distance to the object can be accurately calculated by the sensor. PRT is used not only to measure distance along a line of sight, but also to calculate dimensions of an object. Or it can act in the same capacity as an SRT or PRT sensor and detect objects within a certain distance or range.
An alternative to PRT is one based on phase-correlation, in which the emitter sends light continuously and measures the distance to an object based on the phase angle of the reflected light. Phase correlation sensors have weaker optical signals, and are thus more prone to interference from ambient lighting. They can detect different colored objects at difference distances and can also detect “phantom objects” when a background object is out of phase by 360 degrees.
When an application calls for simple presence detection, a conventional presence sensor is ideal. But when some objects must be seen and others ignored, or an object must be seen only at certain locations, or when the object’s presence and its position must both be known, SPT, MPT, or PRT distance-based sensors are the best options.
Jeff Allison is product marketing manager – photoelectric sensors for Pepperl+Fuchs.
Great article! We at XYZ Interactive Tech. have developed a distance-based IR sensor that merges the technique of angle measurement and signal strength of a reflected IR pulse. This can be done in a low-cost package to output distance with customized resolution and accuracy. We have extended this principle to design sensors in 2D and 3D to recognize hand gestures for "smart" switching technology applications.
Smart sensors is a promising area for innovation in 2013. The combination of more powerful processors, networking connectivity and mass customization of sensor designs is opening up lots of possibilities for more intelligent sensor solutions. Add to that wireless technology, especially for factory applications, and we can expect to see an area ready to keep developing new products.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
Government regulations, coupled with growing consumer sensitivity about data and identity theft, require that data storage organizations demonstrate proper protection and due diligence in protecting sensitive information stored inside datacenter enclosures.
When a crane doesn't have a monitoring system, crane owners schedule service every six months and simply scrap the parts they replace, even if a part has had little use and doesn't need replacing. This can cost thousands.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is