You will find switched-capacitor filters (SCFs) in audio circuits, in anti-aliasing filters, and in tracking filters. The latter type of filter can track a signal by adjusting the filter's clock frequency to "tune" filter characteristics as a sampled signal changes frequency. You also can use SCFs in tone-detection circuits. Unlike a PLL circuit that requires external passive components (and trimming) to detect a tone, an SCF requires only a clock signal. SCFs also serve as notch filters.
Because the filtering occurs based on a "master" clock signal's frequency, you might consider an SCF is you want to scan a given bandwidth to obtain information within it at certain frequencies. The SCFs would act like the front end of a spectrum analyzer.
So, for an SCF, the frequency response depends solely on the ratio of two capacitors, C and C1, and the switching-clock frequency, fclk.
@Jon, thanks for the very informative post. Capacitor ratios can take advantage of the superior matching of capacitances fabricated on silicon. Especially in monolithic form capacitor ratios are very robust against changes in temperature.
As an industry, we now need to up our game and provide contractors with easier ways to properly identify and report counterfeit products and build collaboration between manufacturers, design engineers, industry organizations, and government.
The shift to aluminum is gaining momentum and the demand from automakers for aluminum is soaring, "expecting to reach one billion pounds this year, up from 200 million in 2012, and to grow by more than 30% annually through 2020."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.