Lou Covey, in a recent Element 14 article, suggested that the Department of Energy may have gone ahead with loan guarantees because the portable panels were easier to deploy for Defense Department applications. But other analysts say the DOE's largesse happens across the board, with few questions asked about how a technology might be integrated with systems in the field today.
Take the case of Beacon Power, whose flywheels looked perfectly suited for grid storage when prototypes were demonstrated. Problems in a handful of the 200 flywheels used in a Stephentown, Mass. project led many investors to worry about escalating maintenance costs. Walter Nasde of Ardour Capital told the Washington Post that Beacon had a good technology, but "is this something you can build a business around?" Because the Stephentown project remains in operation, the DOE will be able to recoup some of its investment in Beacon Power, but it's left Congress and the media highly skeptical of DOE efforts to aid alternative energy.
The problems encountered by First Solar in developing thin-film cadmium telluride solar panels are a little tougher to sort out. Two of the market leaders, China-based SunTech and US-based SunPower, rely on crystalline silicon panels. SunTech invested in thin films four years ago but found the declining price of crystalline silicon was hard to beat. SunPower teamed up with semiconductor leader Cypress Semiconductor at an early stage in order to apply chip-style economies of scale to its panel production.
First Solar claims its cadmium-telluride thin film panels offer the lowest carbon footprint for production in the PV panel market, but the company was grumbling when General Electric claimed cadmium-telluride breakthroughs. If First Solar can't show an unbeatable patent protection regime for its panels, an integrated giant like GE could take over in thin-film sectors of the market. First Solar's woes at the end of October suggest the problems in being a thin-film pioneer could prove fatal.
Does this mean US players have to cede the solar and wind markets to companies in China with lower production costs. No, but it does mean that innovative startups and large system integrators need to work together to indicate how a total energy infrastructure could be designed, and how the components of that infrastructure could be manufactured cheaply. It would be nice to think that such an industry would be stronger overall if it minimized acceptance of grants and loan guarantees from DOE. But first, the focus on designing point solutions has to end.
A colleague and I were talking about power companies and their sources, and about point solutions. I was arguing strongly that we needed a LOT more nuclear plants in this country; he said power companies needed diverse sources.
I don't think either of us is wrong.
I would not want to be one of a power company's diverse alternative sources; wind farms in Washington State were shafted this summer when they were asked to shut down because there was too much hydro power available. The investment to plant a wind farm is too great for this type of "request". The power company should have been selling the excess to other states.
TJ, I'm personally not a huge fan of large centralized nuke or coal plants, but I think you have identified the source of the problem for decentralized point sources, and it's one T. Boone Pickens referred to when giving up on his wind farms. The power grid in this country is antiquated, and the DOE's funding of smart grid software only solves half the problem. The physical transmission lines and their support facilities need to be restructured and prepared for an underlying smart grid, and where wiill the capital investment come from for that? Intriguing questions, all.
I think the article (and its title) are exemplary of a focus on USA & the west alone. When I look how the Solar manufacturing industry here in India and in China are exploding (without much subsidy, but with encouragements like SEZ and low laber cost) then I think you can understand why I read the title as:
"Solyndra seeds doubts about Photovoltaic manufacturability... in USA."
I have no doubt of the strong flow of PV panels from India and China where there is a decent ROI for the systems installed with these (low cost) panels, so there is no doubt about viability, even *without* local subsidies. Just allow feed-in tarif at the mid day price level and you will see how the ROI period shrinks to make the PV industry a success, just that manufacturing will be done elsewhere, so we know where we need to focus to be successful!
cvandewater, that was precisely why I made the point about China virtually owning the PV panel market. There are only rare instances where a company outside Asia can show manufacturing advantages. But that does not give Chinese companies a guaranteed market either, as SunTech's recent stumbles show. The alternative-energy market is demonstrating growing pains worldwide.
Most new technologies have had a history of many companies entering the market with many of them failing or being absorbed or merged. Consider automobiles and aircraft in the early 20th century, also radio and TV manufacturers.
In the case of solar, there is a good reason for public subsidy , given the externalities of fossil fuel combustion. These cost the public in many direct and indirect ways.
As foir First Solar, their product has a special problem resulting from the cadmium telluride active material. Years from now when the panels are discarded, they will very likely end up busted in a dump. We conducted a series of experiments where we put broken samples of CdTe PV panels in aqueous solutions with pH values of 7 (distilled water), 6, 5, 4, and 3. for about 4 months.
In all but the distilled water, the cadmium leached out into solution and for pH values of 5 and below virtually ALL the cadmium went into solution. Given the toxicity of Cd and the tons of panels that will end up in dumps, that is a serious threat to groundwater.
The manufacturers have promised to collect the dead panels in 25 or 30 years and reclaim the cadmium, but the funding for this is far from sufficient and who knows what will happen between now and then?
Customers and regulatory agencies are getting wise to the CdTe problem and turning to other less poisonous kinds of panels.
J-allen, very good points about cadmium telluride. I notice that many people in the thin-film industry outside solar panels have been touting the use of lead-free perovskites and similar RoHS-compliant materials. It would be good if green energy companies emphasize the green nature of the entire manufacturing process - which includes addressing the waste concerns of an old panel, just as assuredly as nuclear must include the waste.
The analysis should have been simple for Solyndra, the DOE and everybody here forward... How can you blow a half a billion dollars when given:
Standard Solar PV Panels = $2500 per kilowatt
Solyndra Solar PV Panels = $6000 per kilowatt
The long term analysis of "payback", that point at which the cost of a standard solar kW unit of panels supplying all that "free" power" long enough that your cost of energy = about 12 cents per killowat hour, paying for the initial investment is about 10 to 18 years with standard solar.
So a Solyndra panel would "payback in 24 to 34 years".. Nobody knows if they would even last that long... The material studies are theoretical at least and based on accelerated environmental testing at best. Talk to battery companies about their predictive powers when it comes to end of life...
The moment the cost per Solyndra Solar Kw got a penny higher than the standard tech Kw, alarms should have been going of in everybody's head and big RED LETTERS should have been showing up on spreadsheets.
Bottom line... Electric Utility Power is a commodity item not a vanity item.. Except in special cases (like a PV powered Oil Well) the actual rate of return on PV energy does yet not pay for itself at 13 to 18% efficiency. Maybe it will at 45%...
Some of solar manufacturing challenges may be that executives and engineers were successful in other "similar" industries and want to apply the designs and process they know from their last industries to the new design. On the surface it makes sense, the design or process worked before, should work now, it will give us a big head start. I've seen this approach fail in multiple industries because differences between the old industry and the new industry that are not recognized. When those differences are addressed, they may lead to a different solution.
As engineers, we must always be objective about defining design requirements and being open minded about possible solutions once we have acomplete set of requirements.Hang on tight to your problem solving abilities fellow engineers, remember your failures and how you worked through them to success. Be willing to put your greatest past success aside and objectively move forward to address the new challenges.The new challenges won’t be any easier than the set of challenges associated with your greatest success were. Why should any of us think we can get away without new serious critical thinking to address the new issues and challenges at hand, and not just spending a bunch of money trying to prove that because it worked on x it will work on y.
Jeff_A - Wow, those words ought to be set in stone. Strategies are not always transferrable. It reminds me of an article The Economist ran last week, studying the EU-ECB plan for bailing out Greece and Italy in detail. The government of China and various sovereign wealth funds in the Middle East expressed reticence at putting the money into the new European bonds, because the bonds were structured just like Collateralized Debt Obligations from the U.S. mortgage crisis in 2008 - i.e., Greek toxic debt was sliced up, tranched, and hidden in larger Euro-debt. Gee whiz, the new investors didn't like that idea, and CDOs worked so well the first time! As you said, every new market and new design opportunity should be greeted with a completely fresh perspective.
Perhaps the most serious disconnect between energy issues and the electronic world is the frequent failure by electronics experts to comprehend the realities of electricity as a carrier of energy.
Hence, we have National programs to encourage electric vehicles as if a plugged-in electric motor can draw fuel provided from a plug. Correctly seen, a complete system includes a heat engine driving a generator which connects to drive a motor. The heat engines in central power plants mostly run from 30% to 45% efficient. Thus, the old internal combustion engine (ICE), especially with modern improvements, does not compare so unfavorably to the electric vehicle drive efficiency. It can turn out that the electric vehicle causes more CO2 than the old ICE. With the very cheap basis of electricity being coal, coal prices underpinning electricity costs in general, the general result of moving to electric plug-ins is to make global warming worse.
In the face of this reality, the EPA and DOE seem to have ignored physics when they decreed that the heat lost in the power plant engines need not be counted in calculating MPGE for electric plug-ins. The needed serious critical thinking mentioned here needs to take place on this fundamental point.
Venture capital is risky to begin with, but perhaps a little better due diligence and objective engineering advice should be sought. These examples illustrate the danger of speculating on a government induced market. Government, as constituted in the US, is subject to political tides.The 'Green' initiatives today could easily be apostasy in a few short years.
At the end of the day, these companies were going to have to compete in the energy market as it exists today.These failures had no chance of standing on their own given the current state of the art. Whether they were hoping for subsidies or for the government to rig the market; it was not a reliable business proposition.It appears the loan guarantees enticed technologies out of the R&D world that are not quite ready for prime time.
@Watashi: I agree with your take on Government Induced Market. It never fails to amaze me how a lawyer with an acute ability to raise campaign money and make neat sounding speeches is capable of convincing some people that they really are capable of anything beyond raising campaign funds and making neat sounding speeches.
It really does not matter how badly we want somethings to be true if the math, science and economics dictate that it is false. As someone else commented in this thread, "perhaps someday..." It just does not make sense to pour millions upon billions into something just because you want it to be true.
“It just does not make sense to pour millions upon billions into something just because you want it to be true.”
It does once something has been sufficiently politicized… And especially when it is other people’s money, and if it’s being done to pay back those who helped to get the spread-the-money-around-candidate elected.
Tax breaks for GREEN – Solar – Wind – and energy production in general I have no quam with… But stop writing checks with tax collected monies as a way of supporting long shot/no shot/friends of the admin in politicized industries.
The real story with Solyndra is the thief of funds… not that a company making a product that it would have to sell at 3 times the going rate… went under.
Let me repeat that…The real story with Solyndra is the thief of funds… not that a company making a product that it would have to sell at 3 times the going rate… went under.
The story is that the current president, vice-president, and many others high up in this administration were shills for a half-billion dollar misappropriation of… half a billion dollars into a sinking ship and into a stinking crony’s pockets. Even a quick audit would have told the tale…
BTW… within 15 minutes of starting my research on Solyndra when this then pending thief was first announced 2 years ago… Well… let’s just say they never had a chance in 500 million. Their tech was never competitive… It had nothing to do with changing market forces.
All of that when seen in the larger picture of falling panel prices and rising efficiencies… leads to this conclusion… solar panels will do fine. They are here to stay, but we can not force the growth of our home grown manufactures by pouring billions in carelessly spent tax dollars into the pockets of politically selected companies.
A much healthier solar industry will come from hard work… and perhaps with some incentives… Help… Not hand outs.
I don't know the cost history of Solyndra's technology for sure, but I suspect it was developed during a period when a severe shortage of raw polycrystalline silicon existed and many companies were scrambling to build very expensive silicon plants and PV makers were looking for ways to minimize the use of silicon. Fast forward to about 3 years ago and many of the new silicon plants starting coming online about the same time that European solar subsidies began going away and the radical change in supply and demand caused the price of the raw silicon to drop 90%. So Solyndra had just spent a fortune to build a large highly automated plant with a complex manufacturing process that allowed it to use a less expensive raw material and suddenly their less expensive material is now more expensive. Couple that with a complex process and being in the first year of depreciation on a new plant running at very low utilization and their failure was inevitable. The timing of when additional loans were made and when was it obvious that they could not succeed is important if you want to make political points. At one time, they likely looked like a very good bet, then the world shifted. This is why this type of funding is typically done by venture capitalists who are placing big bets on long shots in hopes of making large returns. Many of these fail for many reasons, but enough succeed that venture capitalists continue to look for opportunities. The difference between a venture capitalist and the government is that a venture capitalist is spending his own money and if he places poor bets, he can decide when to back out or when to "double-down" while the government is betting with our money and has a tremendous amount of bureauracy and lacks incentives to agressively monitor / protect its investment. The politcal points are made early on and typically failures are just ignored. The government does have a role to play in fostering front end research for new technologies that are too far off for any but the very largest companies to invest in. As a new technology shows promise, the government should encourage private industry to pick it up and move it forward to commercialization, maybe auctioning the rights in such a way that the government gets a long term percentage of success and early investors get a larger share or some patent-like protection than later investors.
So now we see some more of the issues that interfere with the success of solar panels. Manufacturing costs and also the toxic chemicals concern. What will be done with the panels at the end of their service life? Actually, it makes more sense to ask about "what can we do to extend the service l9ife of solar panels?" I have not heard much about any wear-out mechanism, so my guess is that the main failure mode is corrosion and failure of the protective medium. On the positive side, there is enough understanding about corrosive failure that panels could be produced today that would last a hundred years without a corrosion caused failure. Of course, such a panel would cost a bit more initially, which would probably lead to a failure in today's market. Failure of the protective media is a bit more complex, but that issue should also be solvable without any new breakthroughs.
The main challenge today is something that I would call "the Wallmart syndrome", meaning that the only product that will sell very well is the one with the cheapest initial purchase price. Product durability and efficiency do not seem to enter into the analysis, so the result is that usually the poorest quality is the one selected.
At that point the business plan may not matter much, and the degree of artificial incentive from the government may only slow the demise of those that are not the cheapest. So probably the best approach would be for the government to step aside and simply enforce truth in marketing. Of course, some sort of standard for product durability could also be a worthwhile assist. Of course, such a standard would have it's own set of concerns and problems.
This is not a good article. The title, whoever conceived it, is misleading at best. Solyndra is typical of companies that come along all the time. Maybe you remember the company that was going to start manufacturing small wind turbines in Colorado Springs. They'd sold the idiot mayor on the idea that he could use them to power individual street lights and save the city money. Or the NEW Millenium turbine company out of Avon that has conned the governments in Newton and Kansas to build a turbine manufacturing company when he is proposing a VAWT that is totally unproven. Yet another "rooftop" turbine that will not be profitable. Or even the "Hojo generator" being advertised on facebook. Or the "Honeywell" wind generator that doesn't work as well as advertised.
I'd rather you did something about the "Amish" heater genre where innocent people are conned out of $300 or more for something that is no better than a Walmart special for $30.
Sorry you didn't like the article ChrisP, the disparate pieces were in part the result of covering dissimilar companies that were collapsing at the same time. I know the turbine story well since I live in Colorado Springs, and the Avon story you mention is an interesting one too. Many examples of lofty ideas in the Naked City....
The legacy endpoint devices that control our critical infrastructure (utility systems, water treatment plants, military networks, industrial control systems, etc.) are some of the most vulnerable devices on the Internet.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.