HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs
Design Decisions: What Designers Need to Know About EMI Shielding
12/5/2012

Comparison of EMI wavelengths to recognizable objects.
Comparison of EMI wavelengths to recognizable objects.

Return to Article

View Comments: Oldest First|Newest First|Threaded View
Amclaussen
User Rank
Platinum
More valuable info is necessary...
Amclaussen   12/5/2012 3:44:49 PM
Although the short article invites to see this matters in more detail, a little more info would be appreciated...

Like: Comparing between std. aluminum vs. copper enclosures, can we use thicker aluminum wall enclosures, or using a copper layer or sheet under the aluminum box acomplish a better result? Then, how thick?...  Are there any thumb rules regarding ventilation hole sizes/pitch and area, size of the perforated section? Location of perforated areas? and so on.  Amclaussen.

gamzoom
User Rank
Iron
Re: More valuable info is necessary...
gamzoom   12/6/2012 11:14:29 AM
              Sizing Honeycomb EMI Shielding  - Broader implications.

This is a new concept for me and I can't help think about the wider implication of extending the principles to portable items and weatherproof vehicles.

In aircraft and outdoor portable units a small bore honeycomb would be vulnerable to water ingress due to capillary action. Exhaust blown air would help remove damp and condensation moisture but any air intake would be vulnerable. There would also be the issue of corrosion in residual trapped water in untreated copper or aluminum honeycomb. This could set some minimum diameter guideline.

The other out-door issue common to aircraft owners, is the minimum diameter of openings that resist the entry of insects. At certain time of the year insects find tubular openings that they can enter. They make silky nests for their larvae to grow in and can obstruct critical airflow. The maximum diameter seems to be about 0.125", which must be too small for a wasp's whiskers and head.  

In common households, and maybe some industrial environments, there is the problem of dust accumulation. Think of the PC CPU cooling fins that get clogged with dust (and fine cat hair if you are a pet lover). Again with input airflow, smaller orifices attract more significant obstruction over time.

So there seems to be some mechanical Max/Min guidelines to consider in a non-sterile existence.

I wonder what has been the experience of the Laser printer manufacturers with their honeycomb blocks. This maybe synthetic, thermally and electrically non-conductive material though. Would plated plastic work?

gamzoom. 

Cabe Atwell
User Rank
Blogger
Re: More valuable info is necessary...
Cabe Atwell   12/7/2012 6:20:16 PM
NO RATINGS
Almost everything the military and NASA designs is in a metal enclosure afterward. It is fairly common practice to do so, I have found. I place a lot of my more sensitive projects inside a metal box routinely. So often the 60hz at the wall has been an issue with my testing, it was a necessity after.

C

Greg M. Jung
User Rank
Platinum
Thermal Management
Greg M. Jung   12/25/2012 3:40:46 PM
NO RATINGS
I agree that sometimes a completely enclosed metal box must be used. In these cases, more expensive heat pipes and heat sinks can also be used for thermal management.

Partner Zone
More Blogs from Guest Blogs
Manufacturers of plastic parts recognize the potential of conformal cooling to reduce molding cycle times. Problem is, conformal molds require additive manufacturing (AM), and technologies in that space are still evolving. Costs also can be high, and beyond that, many manufacturing organizations lack the knowledge and expertise needed to apply and incorporate additive technologies into their operations.
Machine vision and video streaming systems are used for a variety of purposes, and each has applications for which it is best suited. This denotes that there are differences between them, and these differences can be categorized as the type of lenses used, the resolution of imaging elements, and the underlying software used to interpret the data.
In the face of growing challenges for embedded technology engineers, designers should actually be designing for a new IoT -- the Internet of Tomorrow.
As today’s product design cycles are held to tighter schedules and budget constraints, it’s becoming even more critical to consider human factors up front to catch and fix problems during the initial development stages, when it’s faster and less costly to do so. Overlooking human factors at the beginning of the design cycle could lead to poor user experience, a decrease in effective product performance, and an increase in safety risk to the user.
Plastic part manufacturers are always looking for ways to reduce cycle time and get more productivity out of their injection molding machinery. One of the longstanding constraints in injection molding production has been cooling time. Removing parts from the mold before they have cooled induces warping or shrinking. But wait time works against productivity.
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 4 - 8, Designing Low Power Systems using Battery and Energy Harvesting Energy Sources
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service