Guest Blogs
Complete CNC Board Implementation

< Previous   Image 2 of 2   

A CNC motherboard revolves around a backplane that accepts motor driver modules to drive the CNC machine axes. (Source: Texas Instruments)
A CNC motherboard revolves around a backplane that accepts motor driver
modules to drive the CNC machine axes.
(Source: Texas Instruments)

< Previous   Image 2 of 2   

Return to Article

View Comments: Newest First|Oldest First|Threaded View
User Rank
where to post your design
mr_bandit   11/26/2012 5:37:22 PM
When you get your design done, Hackaday.com would probably post it to a very wide audience. You imply this is your design and not a TI product.

It is beefier than most of the open-source units out there (mainly for 3d printers).

You may find a good demand for this. One possible eStore is adafruit.com or the Maker Store (make magazine), esp if you open this up as an open-source or offer it in kit form.

Goto hackerspaces.org and find a hacker space near you - take it by for an intro and show&tell. You might even sell the demo unit on the spot!

Success. Looks like a good project.


Jose Quinones
User Rank
About Source Files
Jose Quinones   11/22/2012 5:36:49 AM
Hi All,

Thanks for your comments and taking the time to read this article! In the upcoming weeks I will be finalizing the application note which will contain details such as schematics and source files. I am also studying different venues to having these boards available for purchasing on some sort of an eStore.

With regards to the USB, I will soon be posting a completely different CNC solution which revolves around USB. It is the one I am using on my 3D printer. However, the truth is as perfect as this solution is for a 3D printer, I would not use it with a router, mill, lathe, plasma CNC table. Any of the later, operate much better when using a CNC controller such as MACH3 and USB solutions have not been able to pair up with their parallel counterpart. In my experience, adding a PCI parallel port to any PC out there works perfectly fine. I have done it with 3 completely different computers (the ones I use for my CNC Mill, CNC Plasma and CNC Router) and as of today have had no problems.

Let me know if there is anything else I can help you with!

User Rank
Re: Home use?
Island_Al   11/21/2012 10:48:33 AM
I'd like a source for this board too.  I've considered doing somthing like this myself so I can let my lathe do the work accurately while I drink coffee. My lathe did not come with change gears to enable it to cut threads.  After spending lote of hundreds of dollars, I still can't cut metric!  On the internet there is a website concerned with "electronic lead screw" kits, a single stepper controller to cut any pitch (coordinated lead screw movement). So many things to do!

Please note that parallel is not serial, but 8 bits wide, and bidirectional. I use old machines running under DOS and one would be amazed how smoking hot these machines really run as far as pure processing horsepower.

USB, while a high through put, are bogged down by multitasking.  For example you can buy a USB to parallel converter to run an older printer. But to run high speed on this bus, you can't.  Connect a scope and repeatedly toggle one bit. Very poor performance overall.

Larry M
User Rank
Everything old is new again
Larry M   11/21/2012 9:47:27 AM
Ahh, yes. About 20 years ago my son and I built a robot using the stepper motors, power supply, and motor driver board from big industrial-grade daisywheel printer. We discarded the logic board and designed and built a simple interface board to interface the motor drivers to..a parallel port.

We used an eight-bit control word, where three bits allowed us to control up to eight motors (two implemented), four bits were used to control individual motor phases, and one bit indicated whether the driver should be at full power (to step) or half-power (to hold position). This design, of course, permitted forward and reverse motion, and half-stepping by energizing two phases at once.


User Rank
Re: Home use?
rv7charlie   11/21/2012 9:40:14 AM
A friend who's an engineer & runs a small prototype shop tells me that none of the serial options can function quickly enough to handle the 'feedback loop' in starting, stopping, & moving the tool. (He's rebuilding a German 5 axis mill & currently dealing with that issue.) 

Cabe Atwell
User Rank
Re: Home use?
Cabe Atwell   11/20/2012 2:53:20 PM
I hate to pull a forum cliché, but...

I need the source on that board!

I couldn't find a link about where I can get one.  I want to use that CNC setup for some home projects (CNC mill and lathe).

On another note, I see it uses a parallel port, serial communication. That is becoming a problem with CNC setups these days. Most new desktop computers, laptops, micro-computers, and the like, do not have parallel ports onboard. In many cases, a parallel port card would need to be installed. And hopefully, the system has an expansion slot available.

What most people do is buy old, or surplus, computers from somewhere. My current CNC mill runs off of a PC I found in the garbage many years ago (Celeron 700MHz Compaq desktop). I think it is time to change how these CNC drive systems work. USB is the only way to go. So, built in support for USB to serial in a good stop-gap solution.

Just a thought.


User Rank
Home use?
naperlou   11/20/2012 11:54:59 AM
Jose, this is an interesting set up.  The power and low cost of microcontrollers has allowed a wide range of very interesting hobbyist projects that would be very difficult in the past. 

Is there more detail about this controller on the TI site.  I know some guys who would be interested.

Partner Zone
More Blogs from Guest Blogs
With strong marketplace demand for qualified engineers across the board that currently outstrips the available supply, there may never be a better time for engineers and project managers to advance their careers and salaries. Whether those moves are successful in the short-term and long-term is likely to depend on how the transition from one job to the next is handled.
There are drivers everywhere who turn on their headlights or windshield wipers with no awareness of the development effort behind a switch. Yet from freezing winter to sweltering summer, on dull rainy days and in bright sunshine, switches are expected to function consistently for the lifetime of a car.
Jet engine maker Pratt & Whitney sees additive manufacturing as a production approach that's complementary to -- not a replacement for -- traditional manufacturing processes.
The standards electrical machines and components are required to meet in the food processing industry are far more stringent than those in traditional plant construction. For specialized production environments such as these, components must not only resist thermal and physical stresses, but they must also be resistant to the chemicals used to sterilize equipment.
The word “smart” is becoming the dumbest word around. It has been applied to almost every device and system in our homes. In addition to smartphones and smart meters, we now hear about smart clothing and smart shoes, smart lights, smart homes, smart buildings, and every trendy city today has its smart city project. Just because it has a computer inside and is connected to the Web, does not mean it is smart.
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 9 - 13, Implementing Motor Control Designs with MCUs and FPGAs: An Introduction and Update
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service