Although the short article invites to see this matters in more detail, a little more info would be appreciated...
Like: Comparing between std. aluminum vs. copper enclosures, can we use thicker aluminum wall enclosures, or using a copper layer or sheet under the aluminum box acomplish a better result? Then, how thick?... Are there any thumb rules regarding ventilation hole sizes/pitch and area, size of the perforated section? Location of perforated areas? and so on. Amclaussen.
This is a new concept for me and I can't help think about the wider implication of extending the principles to portable items and weatherproof vehicles.
In aircraft and outdoor portable units a small bore honeycomb would be vulnerable to water ingress due to capillary action. Exhaust blown air would help remove damp and condensation moisture but any air intake would be vulnerable. There would also be the issue of corrosion in residual trapped water in untreated copper or aluminum honeycomb. This could set some minimum diameter guideline.
The other out-door issue common to aircraft owners, is the minimum diameter of openings that resist the entry of insects. At certain time of the year insects find tubular openings that they can enter. They make silky nests for their larvae to grow in and can obstruct critical airflow. The maximum diameter seems to be about 0.125", which must be too small for a wasp's whiskers and head.
In common households, and maybe some industrial environments, there is the problem of dust accumulation. Think of the PC CPU cooling fins that get clogged with dust (and fine cat hair if you are a pet lover). Again with input airflow, smaller orifices attract more significant obstruction over time.
So there seems to be some mechanical Max/Min guidelines to consider in a non-sterile existence.
I wonder what has been the experience of the Laser printer manufacturers with their honeycomb blocks. This maybe synthetic, thermally and electrically non-conductive material though. Would plated plastic work?
Almost everything the military and NASA designs is in a metal enclosure afterward. It is fairly common practice to do so, I have found. I place a lot of my more sensitive projects inside a metal box routinely. So often the 60hz at the wall has been an issue with my testing, it was a necessity after.
I agree that sometimes a completely enclosed metal box must be used. In these cases, more expensive heat pipes and heat sinks can also be used for thermal management.
The legacy endpoint devices that control our critical infrastructure (utility systems, water treatment plants, military networks, industrial control systems, etc.) are some of the most vulnerable devices on the Internet.
In a switched-capacitor filter, capacitors and switches take the place of resistors and accurately reproduce the characteristics of continuous-time Bessel, Butterworth, and elliptical filters.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
