Medical MIM applications are also on the rise, primarily driven by a macroeconomic focus on dramatically reducing healthcare costs. While the European and US healthcare markets are somewhat mature, the global aging population creates opportunities for the medical industry. According to The Centers for Medicare and Medicaid Services, healthcare spending growth in the US will continue to grow more quickly than GDP for the foreseeable future, despite economic downturn periods.
For example, Parmatech is using MIM for parts used in manufacturing bariatric and laparoscopic instruments, including articulation gear for varying the direction of the working end of the device. The company is using MIM to produce complex, three dimensional shapes that are difficult or near impossible to manufacture using conventional fabrication technologies. MIM provides for complex shapes in a high-volume manufacturing process, and supports the drive toward miniaturization of surgical devices and lowered costs for healthcare equipment. As a result of the trend toward miniaturization, most of the parts made with MIM technology weigh less than 50 gm, and can be additionally lightened by adding holes or pockets without sacrificing strength.
In addition, as US and European OEMs seek to penetrate emerging markets and the BRIC (Brazil, Russia, India, and China) players, cost pressures become the primary success driver; thus, many medical OEMs are looking to cost-saving technologies like MIM with renewed interest.
Figure 1 illustrates the growth in MIM sales over the past 25 years. The upper curve traces global powder injection molding (PIM) annual sales versus calendar year and the lower curve shows the corresponding metal powder injection molding (MIM) contribution.
Macroeconomic drivers strongly support continued MIM growth. Table 1 illustrates the projected growth rates, with the global MIM market projected to grow from $985 million in 2009 to $1.9 billion in 2014, representing a 14 percent compound annual growth rate (CAGR). In North America, the market for MIM product is projected to grow from $231 million in 2009 to $424 million in 2014. In Europe, the market for MIM product is projected to grow from $280 million in 2009 to $484 million in 2014.
With such clear-cut macroeconomic and socioeconomic growth drivers, strong technical players in MIM can expect to bring more value to customers than any of us ever imagined.
Tracy, the reputation of MIM in the firearms industry is not great. Of course, the stresses experienced there are much higher than in most applications. Improvements in the processes that you mention should, over time, change people's minds.
I do wonder if MIMs parts will have competition from 3D printing, which is often mentioned in this magazine. MIMs is, of course, much faster.
Tracy, as I understood it from the sources in my upcoming December feature article on IM, MIM has been especially successful in the automotive sector. What are other sectors where MIM is already well established?
Can this simply be an indication of increased population and "westernization" lead to an increased demand for products?
A global "keeping up with the joneses." If I lived in a society of limitations or old-world living, I would crave everything the most modern have. I'm sure the almost 3 Billion people in China and India alone feel the same way.
I see two different processes mentioned here, one being metal injection molding, th other being pwdered metal molding and sintering. Both processes are capable of producing a real cost reduction in some instances, both are capable of dramatic reductions in assembly effort. but they are quite a bit different. Yet the change in subject did not seem to realize the big difference between the two processes. So it would be worthwhile to clarify which one is being touted at each part of the writeup.
@William K.: MIM is considered to be a P/M process. Powder metallurgy encompasses everything from traditional press-and-sinter (the P/M that most people know, since it's been around the longest) to more advanced processes such as powder forging and MIM.
Powder injection molding (PIM) includes both metal injection molding and ceramic injection molding. An interesting thing in the graph is that ceramic injection molding seems to have really taken off around 2000 (looking at the space between the blue and red curves), but since then, has not grown as fast as MIM. It would be interesting to know why that is.
I also think it's interesting that the graph stops right before the global financial crisis. (Obviously, a graph that points up looks better than a graph that points down, if the title of your article is "Growing Future for Metal Injection Molding"!)
I think the article is absolutely right that MIM is well-suited for small, high-volume parts. For larger parts, investment casting will probably continue to be a better choice, and for low-volume parts, I think naperlou is right that 3D printing technologies such as SLS will play a growing role. Part of the "technology de-bugging period" referred to in the article involved design engineers learning where MIM is, and isn't, the best choice.
Probably ceramic injection molding quickly took over the limited realm of ceramic parts, and after all of those applications adopted it there was nobody else that needed it. After all, meta/ceramic parts are not used in that many places and it may take quite a while to discover additional applications.
The fact is that the ceramic/metal parts are not cheap, and if they don't offer a real benefit, why pay more.
Besides that, there are only so many foks who really need a ceramic pocket knife that metal detectors don't see.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
The legacy endpoint devices that control our critical infrastructure (utility systems, water treatment plants, military networks, industrial control systems, etc.) are some of the most vulnerable devices on the Internet.
In a switched-capacitor filter, capacitors and switches take the place of resistors and accurately reproduce the characteristics of continuous-time Bessel, Butterworth, and elliptical filters.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
10 
