HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Design Decisions: What Designers Need to Know About EMI Shielding

View Comments: Newest First|Oldest First|Threaded View
Greg M. Jung
User Rank
Platinum
Thermal Management
Greg M. Jung   12/25/2012 3:40:46 PM
NO RATINGS
I agree that sometimes a completely enclosed metal box must be used. In these cases, more expensive heat pipes and heat sinks can also be used for thermal management.

Cabe Atwell
User Rank
Blogger
Re: More valuable info is necessary...
Cabe Atwell   12/7/2012 6:20:16 PM
NO RATINGS
Almost everything the military and NASA designs is in a metal enclosure afterward. It is fairly common practice to do so, I have found. I place a lot of my more sensitive projects inside a metal box routinely. So often the 60hz at the wall has been an issue with my testing, it was a necessity after.

C

gamzoom
User Rank
Iron
Re: More valuable info is necessary...
gamzoom   12/6/2012 11:14:29 AM
              Sizing Honeycomb EMI Shielding  - Broader implications.

This is a new concept for me and I can't help think about the wider implication of extending the principles to portable items and weatherproof vehicles.

In aircraft and outdoor portable units a small bore honeycomb would be vulnerable to water ingress due to capillary action. Exhaust blown air would help remove damp and condensation moisture but any air intake would be vulnerable. There would also be the issue of corrosion in residual trapped water in untreated copper or aluminum honeycomb. This could set some minimum diameter guideline.

The other out-door issue common to aircraft owners, is the minimum diameter of openings that resist the entry of insects. At certain time of the year insects find tubular openings that they can enter. They make silky nests for their larvae to grow in and can obstruct critical airflow. The maximum diameter seems to be about 0.125", which must be too small for a wasp's whiskers and head.  

In common households, and maybe some industrial environments, there is the problem of dust accumulation. Think of the PC CPU cooling fins that get clogged with dust (and fine cat hair if you are a pet lover). Again with input airflow, smaller orifices attract more significant obstruction over time.

So there seems to be some mechanical Max/Min guidelines to consider in a non-sterile existence.

I wonder what has been the experience of the Laser printer manufacturers with their honeycomb blocks. This maybe synthetic, thermally and electrically non-conductive material though. Would plated plastic work?

gamzoom. 

Amclaussen
User Rank
Platinum
More valuable info is necessary...
Amclaussen   12/5/2012 3:44:49 PM
Although the short article invites to see this matters in more detail, a little more info would be appreciated...

Like: Comparing between std. aluminum vs. copper enclosures, can we use thicker aluminum wall enclosures, or using a copper layer or sheet under the aluminum box acomplish a better result? Then, how thick?...  Are there any thumb rules regarding ventilation hole sizes/pitch and area, size of the perforated section? Location of perforated areas? and so on.  Amclaussen.

Partner Zone
More Blogs from Guest Blogs
As additive manufacturing (including 3D printing) becomes increasingly popular among businesses as a quick and easy solution to creating and evaluating prototypes and end-use products, the debate about whether to outsource production or to purchase equipment for in-house use is at the forefront of industry discussions.
With increasing terrorist threats overseas, organizations are thinking about how best to defend themselves here and abroad. Engineering can play a role, especially when it comes to putting a barrier between yourself and the bad guys.
Time to market is everything, but at the same time, you cant sacrifice quality for speed. Thats where additive manufacturing comes into play.
In the last few years, use of CFD in building design has increased manifolds. Computational fluid dynamics is effective in analyzing the flow and thermal properties of air within spaces. It can be used in buildings to find the best measures for comfortable temperature at low energy use.
Feature-advantage-benefit could help engineers in how we approach design problems, how we sell our ideas to management, and how we market ourselves when it comes to jobs.
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service