The tray table that folds in half for stowage in the armrest of an airline seat is something I have long admired for its design ingenuity, but long cursed for its operational opaqueness and flimsiness. On domestic flights, tables of the kind I am describing are usually found in the first-class cabin and on seats facing a bulkhead. The more common rigid tray tables that swing down from the back of the seat in front of a passenger are obviously less costly to manufacture and install, and so are used wherever the seat pitch allows them.
But even before the more complex armrest table can be deployed into a (hopefully) flat and horizontal position, the airline passenger has to get the thing out of its underarm pocket. This can be more easily said than done, for there is no standard feature to grasp on the stowed table. Some models have a fabric loop, some a trigger-like hook, and some a corner hole. Since not all passengers are able to contort their bodies or squint their eyes sufficiently to see what aid might be lurking in the dark recess, they tend to feel around for a familiar shape and tug on it.
Once the table has been wrestled out of its hold, it can typically be rotated about an orthogonal axis to become a half table, often with a slight depression in its surface to keep drinks from walking off the edge during air turbulence or just under ambient vibration. It is in deploying this half table that passengers might first discover that the top can have a pronounced incline. On a recent flight from Chicago to Raleigh-Durham I found myself with such a table. As I waited for the flight attendant to bring me a drink, I almost put the table back into the armrest, since I would have had to hold the glass anyway.
The detailed design of the kinematically clever deployable armrest table understandably varies from airplane model to airplane model, but virtually all variations seem to depend for their operation on two primary mechanical principles: the hinge and the cantilever. Some also contain a slide or swivel feature, which enables the more corpulent user to push the tray forward or aside to gain some breathing room.
In one common form, the two halves of the table have their top edges connected through a pair of link hinges; the bottom edges of the two halves butt up against each other, providing reaction forces. Collectively, the forces maintain a cantilevered table top in a flat and horizontal position. One familiar form of tray table, when fully deployed, forms a bridge of sorts between a seat's armrests.
On my flight where the folded table sloped downward, the unfolded one would also have -- had it not been for the opposing armrest providing a support constraint. Thus, the fully opened table top formed not a flat plain but a shallow valley. The two halves inclined toward the center, creating a V into which everything from pencils to peanuts to plastic drink glasses would want to slide.
Entertaining musing on the give and take of good design. What's the greater takeaway for engineers, though? Don't factor use case into your efforts for fear of legal repercussions? That seems like a cop-out to me. After all, not every flight enjoys the benefit of having mechanically-inclined flight attendents on board.
Professor Petroski's final point in this article alludes to the fact that product liability law requires a product to be safe not only in its reasonably expected use, but also any reasonably expected misuse. Engineers are often horrified to learn that the law requires us to take potential misuse of a product into account. Ironically, although we bristle at the idea of other people misusing our products, we also excel at coming up with creative new ways to "use" products others have designed. Some of the new uses which particularly creative engineers find for things may not fall into the "reasonably expected" category.
It's been years, but I remember a flight with, I swear, that same tray table "design," which made it completely unusable when deployed. And that was so obviously the case that I could not understand how the design ever got accepted and the tray table installed, in thousands of planes. I was not so fortunate as Professor Petroski, however, in my flight attendants. This all makes me think less of the legal issues than of the designers/users and use case issues.
The nice thing about the tray tables that Professor Petroski describes is that they are not attached to the seat back. Anything is better than that. If I put my laptop on one of those, the person in front of me glances back over his/her shoulder to let me know I'm bothering them. Worse, when the person in front leans back, the tray table is suddenly so close that there's no room to work.
Ann, Beth, Dave & Prof. P., I write this as you Professor wrote your article on arm chair design....with toung in cheek. The story starts with me being the only person, other than crew, left on a plane durind a short layover. A AL Mechanic arrived and went to work on one of the tables you all described. He almost instantly recived a loud message over his 2way "you have 5 minutes". He started to work very delicatly and expertly for the next 10 minutes when he received a VERY loud call "you need to pack it in we have to load."
Being a company man (I determined by his appearence) he reached down to his tool belt, holstered his Phillips Head screw driver swept his hand dirrectly to the hammer loop, grabbed it , pounded the table into the midseat container, flipped the cover closed and annouced towards the Captain "All fixed sir she's ready to go have a good flight" while exiting the aircraft.
THIS ALL HAPPENED FASTER THAN THE TIME IT TOOK ME TO WRITE THIS. It sticks in my mind to this day because I am also a Pilot.
I've had another rude awakening this week: no matter how hard I try, how intelligent I may be; there is always one idiot "smarter" than me who will discover the way to damage the machine. This week, the idiots won.
Arlo Guthrie has a thing or two to teach engineers about "reasonably expected misuse", from his song Alice's Restaurant:
"Kid, I'm going to put you in the cell, I want your
wallet and your belt." And I said, "Obie, I can understand you wanting my
wallet so I don't have any money to spend in the cell, but what do you
want my belt for?" And he said, "Kid, we don't want any hangings." I
said, "Obie, did you think I was going to hang myself for littering?"
Obie said he was making sure, and friends Obie was, cause he took out the
toilet seat so I couldn't hit myself over the head and drown, and he took
out the toilet paper so I couldn't bend the bars roll out the - roll the
toilet paper out the window, slide down the roll and have an escape.
One thing I don't think the airlines or designers really considered is the lifetime of the product in this case. Is it reasonable to expect something that gets as much use as a tray table to last the lifetime of the plane. Those are typically flown for many years. They should have designed them to easily replaced (say during a layover) and refurbished in the shop.
Airplane tables are useful... as mouse pads. I had access to a bunch of old trays being thrown out. For black or featureless tables they make very nice mouse pads! No bending or warping. Conversation piece too.
As for use on aircraft, they do leave a lot to be desired. However, there is little choice. Make a great table and someone will lean on it and bend it. Make it stronger? Not only heavier but more tempting to lean on. Live with it - and carry a pop can tab.
I have come across those tables that pop up from between the seats and have never had any problems with them. Probably being an experienced engineer helps a bit there. I have been on lots of flights where I had to hold my drink so that the bumps would not launch it into my lap, or somebody else's lap. I agree that the ones that fold out of the back of a seat are much nicer, although I have never been able to use a computer on a plane.
If you want a real challenge though, try to utilize the footrest on one of the Amtrack trains. There is a button on the armrest to release it, but in the trains that I have ridden there is nothing to make it move once it is released. The only way we figured out to use the footrest is to grab it with a hand and pull it into position. My guess is that the springs were removed to prevent terrorists from somehow utilizing the footrests for something, or possibly to prevent idiots from doing something really stupid with them.
I really would preferr that our legal system stop rewarding idiots and fools for injuring themselves, and instead, fine them for being so stupid. OF course, then we would have the lawyers seeking customers under some other premise, and that might be worse.
An analysis of what’s needed to implement Design for Disassembly and Design for Recycling results in eight strategies engineers can use to design an intentional end-of-life stage into their products.
Government regulations, coupled with growing consumer sensitivity about data and identity theft, require that data storage organizations demonstrate proper protection and due diligence in protecting sensitive information stored inside datacenter enclosures.
When a crane doesn't have a monitoring system, crane owners schedule service every six months and simply scrap the parts they replace, even if a part has had little use and doesn't need replacing. This can cost thousands.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
