HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs
Keep an Eye on Hydraulic Transmission Lines
11/7/2013

Image 1 of 2      Next >

Image 1 of 2      Next >

Return to Article

View Comments: Newest First|Oldest First|Threaded View
William K.
User Rank
Platinum
Hydraulics and effectiveness, and design considerations.
William K.   11/8/2013 12:13:07 PM
NO RATINGS
This article has interesting analogies with electrical systems, and they seem to be valid. I have designed mostly electrical, but also hydraulic and pneumatic systems for quite a few years. While the analogies may be useful they can also be a bit confusing. The challenges are that hydraulics can suffer from frictional losses and inertial losses, and while friction equates quite well to resistance, the inertia losses from changing directions are less obvious. Also, the pressure head developed between different levels in a hydraulic system has no real equal in electricity, I don't think. No, a few PSI head does not matter much in a 5000PSI system, but it does play a part in some return line systems.

So perhaps it would be better to just explain the hydraulics part, which the article did quite well.

naperlou
User Rank
Blogger
Good approach
naperlou   11/7/2013 12:01:01 PM
NO RATINGS
Kevin, this is an important consideration.  You do not mention it, but I assume that you would model this in a tool such as Simulink.  It is important to model the transmission lines and this can be done with CFD tools and the parameters entered into your model. 

Just as an aside, my father worked at a government lab in the last half of the last century of the last millenium.  I remember him bringing stuff home when I was a boy, and he would make cryptic comments about it.  That is all he could say.  One time he brings home a metal plate with all kinds of channels milled out.  These were made by an early CNC machine.  He made the statement that hydralics would replace electronics in many applications.  Well, I think he overstated it a bit.  But, in light of your article, I think he was on to somthing.

Partner Zone
More Blogs from Guest Blogs
Iterative design — the cycle of prototyping, testing, analyzing, and refining a product — existed long before additive manufacturing, but it has never been as efficient and approachable as it is today with 3D printing.
People usually think of a time constant as the time it takes a first order system to change 63% of the way to the steady state value in response to a step change in the input -- it’s basically a measure of the responsiveness of the system. This is true, but in reality, time constants are often not constant. They can change just like system gains change as the environment or the geometry of the system changes.
At its core, sound is a relatively simple natural phenomenon caused by pressure pulsations or vibrations propagating through various mediums in the world around us. Studies have shown that the complete absence of sound can drive a person insane, causing them to experience hallucinations. Likewise, loud and overwhelming sound can have the same effect. This especially holds true in manufacturing and plant environments where loud noises are the norm.
The tech industry is no stranger to crowdsourcing funding for new projects, and the team at element14 are no strangers to crowdsourcing ideas for new projects through its design competitions. But what about crowdsourcing new components?
It has been common wisdom of late that anything you needed to manufacture could be made more cost-effectively on foreign shores. Following World War II, the label “Made in Japan” was as ubiquitous as is the “Made in China” version today and often had very similar -- not always positive -- connotations. Along the way, Korea, Indonesia, Malaysia, and other Pacific-rim nations have each had their turn at being the preferred low-cost alternative to manufacturing here in the US.
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service