HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Why You Should Assess Your Machines' Safety

NO RATINGS
View Comments: Newest First|Oldest First|Threaded View
Page 1/2  >  >>
Rob Spiegel
User Rank
Blogger
Re: Safety is complicated
Rob Spiegel   9/22/2013 4:04:01 PM
NO RATINGS
That list is pretty good, TJ. Europe seems to be outpacing even American when it comes to regulations. The formation of the EU seems to have escalated the development of regulations.

Battar
User Rank
Platinum
Re: Safety is complicated
Battar   9/22/2013 8:05:14 AM
NO RATINGS
I looked it up on Snopes.com, this is actually an age old urban myth.

However, if you look up "Commission Regulation (EEC) No 1591/87 of 5 June 1987 laying down quality standards for cabbages, Brussels sprouts, ribbed celery, spinach and plums " you will see that it is not far removed from reality. And also that you can't grow unregulated cabbages in the EU.

Pubudu
User Rank
Platinum
Re: Safety is complicated
Pubudu   9/22/2013 3:31:40 AM
NO RATINGS
TJ its says thousands of words. Thanks for the pic

When it come to safety people should come to first than the regulation I it is a must to follow the regulation it should update regularly. 

Pubudu
User Rank
Platinum
Re: Prime Importance
Pubudu   9/22/2013 3:21:41 AM
NO RATINGS
Danielle, timely valuable article, 2013 Savar building collapse in Bangladesh is the best example of ignoring the work place safety.


I do believe that employees has a major responsibility of highlighting those issues to the management cause that they are the people who will feel or see the things first they should be stand up their rights, rather than warring after happening something.

Battar
User Rank
Platinum
Re: MACHINE SAFETY
Battar   9/22/2013 3:03:09 AM
NO RATINGS
" Everyone in that work cell was paid based upon total product count at the end of each day"

I think THAT is the root of your problem, not the safety over-ride. Adding a pass code is just giving an aspirin to cure the headache - it doesn't address the cause of the headache.

bobjengr
User Rank
Platinum
MACHINE SAFETY
bobjengr   9/21/2013 2:40:26 PM
NO RATINGS
Excellent post Danielle.    About three years ago I designed a work cell for dispensing an adhesive onto a stainless steel inlay.   The inlay was then placed on a cast control panel and the process completed by adding a timing device.  The adhesive was applied by a SCARA robot.  Great machine for removing the tedium from the operation and took "manpower" out of the equation.  We had our system set up and operating in about two weeks and felt we were "good to go".  We ran for about four days then one morning I got a call from the work cell leader.  The robot had "decked" an operator and caused a reportable OSHA incident. The worker was not injured badly but did receive a concussion that took him out of the picture for about a week.  We discovered the safety devices had been disengaged to "speed up progress".  The irony of the entire situation was the injured employee was the one who made the changes.  Everyone in that work cell was paid based upon total product count at the end of each day.  We reprogrammed so a pass-code had to be used to make changes or adjustments to the program.  It could have been much worse.   As Danielle indicates, safety is critical when using automated systems and maintaining that safety is a must.

taimoortariq
User Rank
Gold
Really Important
taimoortariq   9/21/2013 2:37:18 AM
NO RATINGS
Nice Article Danielle, Definitely to keep the safety of employees in the plant should be of prime importance. Regular maintainence and saftey checks on machines are essential. In addition to the safety of employees, a company can face major financial set backs based on such accidents and even if human accidents do not occur, faulty machine due to untimely checks can prove to cause a major delay in the production as well. Certainly, to have the machines on regular maintainance is of prime importance.

Charles Murray
User Rank
Blogger
Re: Prime Importance
Charles Murray   9/20/2013 6:34:24 PM
NO RATINGS
I agree, naperlou. We live in a highly litigious society, and that's not going to change. For legal reasons and safety reasons, assessment is important.

apresher
User Rank
Blogger
Machine Safety
apresher   9/20/2013 3:48:13 PM
NO RATINGS
TJ, Like your image on the Evolution of Regulation.  Very appropriate.

bob from maine
User Rank
Platinum
Re: Safety is complicated
bob from maine   9/20/2013 1:17:45 PM
NO RATINGS
Amen TJ. When the number of "Cautions" and pictures of hazards out-weigh the instructions on how to operate a machine correctly; no-one bothers to read the cautions - they become just more "noise". The proper, safe operation of a machine must be frequently re-analyzed but not by an organization whose success is measured in unnecessary shutdowns and fines levied, or by people who judge their success on whether or not they may have protected the company from lawsuits.

Page 1/2  >  >>
Partner Zone
More Blogs from Guest Blogs
We Have FPGAs with On-chip MCUs, but How About MCUs with On-chip FPGAs?
Programmable logic has come a long way from the simple devices we started out with. Remember Programmable Array Logic, or PALs? But where will we be in the next five to 10 years?
As industrial applications increasingly use process control systems utilizing sensor feedbacks to monitor various operating parameters, energy sources and consumption are becoming major factors of a system.
By asking more in-depth questions and providing customers with richer design data, distribution salespeople can quickly build credibility and help customers to avoid potential problems when they specify high-performance plastics.
Recent enhancements in rechargeable and primary (non-rechargeable) battery technologies enable industrial devices to perform beyond the limitations of legacy consumer batteries.
Design News Webinar Series
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 15 - 19, An Introduction to Web Application Security
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service