Design for Manufacturability (DFM) is the general art of creating new designs in such a way that theyíre easy and inexpensive to manufacture. Anyone who has ever designed a product to be injection molded likely learned that small design changes can significantly impact the cost, time frame, and overall success of the project.
This is also true for additive manufacturing projects. Being aware of a few common mistakes that might be made during the design process can help minimize costs and delays. That awareness can also help avoid the creation and delivery of unsatisfactory parts that require further changes and rebuilds in order to meet the needs of the customer.
Pay close attention not only to the native CAD design of what is to be produced via additive manufacturing, but also the converted .STL version thatís often required. The .STL file format is the standard data interface between CAD software and most additive manufacturing machines. An .STL file approximates the shape of a part or assembly using triangular facets.
Before submitting a design for any additive manufacturing project, keep an eye out for these seven common mistakes in part design and file conversion:
The part design has thin features or walls, less than .03 inch for standard resolution, or .015 inch to .02 inch for high-resolution machines. Due to the layer-by-layer approach of the additive manufacturing process, anything smaller or thinner than this will often not build and wonít be present in the final model. Pay close attention to raised or recessed logos and areas of small text, knife-edge features which taper down to zero thickness, and curvy sections of any design where thickness can fluctuate.
The native CAD model is converted to .STL format with a very low resolution, resulting in heavy faceting in the model. If the .STL fileís resolution is too low, the model will be faceted instead of having smooth surfaces and curves. This can be quite common and produces unattractive parts. Typically, to achieve a smooth finish on a model, there should be an edge-to-edge distance of less than .02 inch between facets on the .STL file. Check the parameters on the native CAD program being used to determine the best method of exporting acceptable .STL files.
The original CAD data has numerous unstitched surfaces (rather than solids), resulting in errors when converting to .STL format. Make sure that surfaces used in the original CAD model are water-tight. The .STL file should also be inspected to ensure that all dimensions, the part volume, and the surface area appear correct. Your 3D-print software should be built to assist with that.
The part design has an enclosed hollow space from which support and build materials canít be removed. Any enclosed hollow void in the design will contain support materials that canít be removed upon model completion. This area may also be filled with unused resin or powder depending on the selected prototyping process. Consider filling in voids to be solid, building the design in halves to allow access to the enclosed space, or adding a hole of some kind in the model to allow for the removal of the support materials.
Assemblies, threads, and mating features are designed with improper clearance. The standard tolerances for most additive manufacturing processes start at +/-0.005 inch and compound from there as the design increases in size. Itís not uncommon for first-time customers to receive parts that, while within the published tolerances of the manufacturing process, donít mate up as intended. Typically, there should be a 0.015 inch to 0.02 inch clearance between mating parts, which is different from whatís required for traditional injection molding. This is an important point when the projectís success depends on how well different designs assemble with one another.
The design includes a living hinge that needs to function. Living hinge designs on most parts produced via additive manufacturing donít typically function as intended. The build material involved is often too rigid, especially in such a thin section, and will break. While a few materials have been developed to address this need (such as the Duraform EX material using the SLS process), expect limited use from a living hinge design produced via additive methods.
The measurement units for the .STL file differ from what was intended. Double-check the .STL fileís properties to ensure that the correct unit is selected. This is especially true when thereís more than one design with varying units of measurement being built together. Some CAD packages also have default settings where .STL files may be exported in a different unit from what was used during the design process.
Practically all electronic devices today contain metals that may
be coming from conflict-ravaged African countries. And political pressures will increasingly influence how these minerals are sourced and used in products.
Design for manufacturing (DFM) in mold production means that mold designers evaluate the manufacturability of their molds in the early stage of mold development by collecting all relevant information and applying it to their designs. They also have to consider many other factors, including flow balance, structural stress, and assembly tolerance, in order to ensure successful molding production.
Some adhesives provide strong structural bonds but take hours to fixture and attain handling strength. The technologies that offer the fastest cure do not bear loads or withstand stresses. A new class of adhesives aims to make both stick.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.