HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Now Is the Time for Battery Alternatives

NO RATINGS
View Comments: Newest First|Oldest First|Threaded View
Page 1/2  >  >>
michal
User Rank
Iron
Re: Cheap
michal   8/12/2013 8:23:07 AM
NO RATINGS
Then I think thay the Yamaha engineers are much smarter then Bose engineers. As I've written previously in my Bose remote I need to exchange batteries twice a year (4 AA's).

Battar
User Rank
Platinum
Re: Cheap
Battar   8/12/2013 8:16:32 AM
NO RATINGS
I'm suggesting that for every hour of home entertainment use, the remote spends 2 seconds transmission time changing channels, and 5 seconds transmission time changing volume. Each key press translates to about 50msec burst data transmission. For the range required inside the home output power is very low, so less than 10mA is required.

If the batteries are also required to drive a real-time-clock and display, well, thats just a design feature. ISM transmitters can work down to 2.0V, and uPs can work to 2.7V, so 2 AAAs have enough voltage and amp hours to keep you going until you lose the remote behind the sofa cushions.

My own Yamaha AV receiver is 2.5 years old and still has the original manufacturers batteries in the remote.

michal
User Rank
Iron
Re: Cheap
michal   8/12/2013 8:04:11 AM
NO RATINGS
So you are sugesting that one uses the home cinema remote as frequently as the swimming pool remote? Well... homecinema does not work autonomously and at least in my home has the biggest interaction with users through the remote. IMHO, 10 hours of operation time during the lifetime is way too low. And forget 3.6V expensive batteries, they are 10 times more expensive than AA. It seem for me that your 'cheap' sounds very expensive too me.

Battar
User Rank
Platinum
Re: Cheap
Battar   8/12/2013 7:50:38 AM
NO RATINGS
That swimming pool cleaner comes with a 433MHz remote control, for when you want to play around with it at the pool side. Most of the time it works autonomously.

michal
User Rank
Iron
Re: Cheap
michal   8/12/2013 7:47:59 AM
NO RATINGS
Cannot you give just a link? Google finds some swimming pool cleaner when I type Ultramax robot. This is not what I'm after ;)

Battar
User Rank
Platinum
Re: Cheap
Battar   8/12/2013 6:53:33 AM
NO RATINGS
Michal,

         I can, we did, and we sell the product. Actually it uses a 1/2AA lithium thionyl chloride cell, but thats only because we needed 3.6V and not 3V. We could do it on AA's too. According to our calculations, the remote control would be in use for about 10 hours over the product lifetime, at 20mA thats well within the capacity of the battery. Sleep mode is 2uA. (In practice, most users lose the remote during the first 2 years of ownership). If you want to see the product, look up Ultramax robot.  Your name is very common in a certain country, and thats where these products are made.

michal
User Rank
Iron
Re: Cheap
michal   8/12/2013 6:04:44 AM
NO RATINGS
Hi Battar,

can you design a radio remote controll which will last 5 year or more? Here I have example of EnOcean in action which replaces universal remote from Bose (havey and powered by 4 AA batteries which I must replace 2 times a year) -- EnOcean does not need any batteries

http://mqlservice.net/openremote/2013/06/20/simple-remote-for-home-cinema/

Battar
User Rank
Platinum
Re: Cheap
Battar   8/12/2013 5:49:03 AM
NO RATINGS
Michal (nice name...)

                              It is easy to design sensors that can work for 5 years or more on a couple of AA (or even AAA) batteries.  Most of us don't really have that many sensors in the house, and much of our battery powered equipment is "asleep" 99% of the day. In many cases, a set of batteries will last the lifetime of the product, as a)circuits can be designed for very very low power and b)the lifecycle of most electronic gadgets doesn't exceed 7 years (usually less).

michal
User Rank
Iron
Re: Cheap
michal   8/12/2013 5:36:11 AM
NO RATINGS
Not so cheap for me. If you have many sensors scattered in your house which needs to be replaced usually once a year then this task is a real burden. It easily takes few hours yearly and my hourly rate is much higer than $0.16. For me, when I see sensor battery powered I look elsewere. Batteries put a real obstacle on automation scalibility.

Debera Harward
User Rank
Silver
Re: Battery Recycling
Debera Harward   8/4/2013 8:39:49 PM
NO RATINGS
According to me its great that there are alternatives of batteries but they cant be complety removed instead of harvesting energy and using /inventing rechargable batteries these batteries will still be in use .One should not through these batteries any where because they can be harmfull instead they should be recycled . Recycling of batteries results in income generation, reduction in pollution , saves energy and so on .

Page 1/2  >  >>
Partner Zone
More Blogs from Guest Blogs
Iterative design — the cycle of prototyping, testing, analyzing, and refining a product — existed long before additive manufacturing, but it has never been as efficient and approachable as it is today with 3D printing.
People usually think of a time constant as the time it takes a first order system to change 63% of the way to the steady state value in response to a step change in the input -- it’s basically a measure of the responsiveness of the system. This is true, but in reality, time constants are often not constant. They can change just like system gains change as the environment or the geometry of the system changes.
At its core, sound is a relatively simple natural phenomenon caused by pressure pulsations or vibrations propagating through various mediums in the world around us. Studies have shown that the complete absence of sound can drive a person insane, causing them to experience hallucinations. Likewise, loud and overwhelming sound can have the same effect. This especially holds true in manufacturing and plant environments where loud noises are the norm.
The tech industry is no stranger to crowdsourcing funding for new projects, and the team at element14 are no strangers to crowdsourcing ideas for new projects through its design competitions. But what about crowdsourcing new components?
It has been common wisdom of late that anything you needed to manufacture could be made more cost-effectively on foreign shores. Following World War II, the label “Made in Japan” was as ubiquitous as is the “Made in China” version today and often had very similar -- not always positive -- connotations. Along the way, Korea, Indonesia, Malaysia, and other Pacific-rim nations have each had their turn at being the preferred low-cost alternative to manufacturing here in the US.
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service