HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Power Plants & Water Treatment Facilities Diagnose Motor Problems

NO RATINGS
View Comments: Newest First|Oldest First|Threaded View
William K.
User Rank
Platinum
Sophisticated motor testing equipment
William K.   7/28/2013 9:40:47 PM
NO RATINGS
It would be quite interesting to have an explanation as to what particular types of motor failings each of the test types are detecting, and some explanation about the mechanism o0f detection. The failure modes that I am aware of are short circuits and leakage to the frame, short circuited turns, and winding opens. Leakage is not that hard to detect, shorted turns would be easily found by the impulse, or inductive ringing tests, and winding opens are easily detected with an ohm meter. Locating the actual fault in order to repair it is a lot more challenging though. Then there are other faults, such as bearing noise and loss of balance, which are also problems but sa bigger challenge to detect electrically.

Greg M. Jung
User Rank
Platinum
User-Friendliness
Greg M. Jung   7/28/2013 11:59:26 AM
NO RATINGS
I think the big point that resonanted to me throughout this article was to design products that are user-friendly.  While the selected product was not at the high end in its market segment, one of the most important selling features was good user-friendliness.

AnandY
User Rank
Gold
RE: Living up to customers guarantee
AnandY   7/26/2013 6:13:03 AM
NO RATINGS
There is no doubt that the recent developments in technology will enable an efficient winding and motor testing process. However, most customers will have no idea of the details of the entire process. This calls for a need to ensure customer satisfaction and employ the use of professionals in ensuring an efficient winding process.

Partner Zone
More Blogs from Guest Blogs
Iterative design — the cycle of prototyping, testing, analyzing, and refining a product — existed long before additive manufacturing, but it has never been as efficient and approachable as it is today with 3D printing.
People usually think of a time constant as the time it takes a first order system to change 63% of the way to the steady state value in response to a step change in the input -- it’s basically a measure of the responsiveness of the system. This is true, but in reality, time constants are often not constant. They can change just like system gains change as the environment or the geometry of the system changes.
At its core, sound is a relatively simple natural phenomenon caused by pressure pulsations or vibrations propagating through various mediums in the world around us. Studies have shown that the complete absence of sound can drive a person insane, causing them to experience hallucinations. Likewise, loud and overwhelming sound can have the same effect. This especially holds true in manufacturing and plant environments where loud noises are the norm.
The tech industry is no stranger to crowdsourcing funding for new projects, and the team at element14 are no strangers to crowdsourcing ideas for new projects through its design competitions. But what about crowdsourcing new components?
It has been common wisdom of late that anything you needed to manufacture could be made more cost-effectively on foreign shores. Following World War II, the label “Made in Japan” was as ubiquitous as is the “Made in China” version today and often had very similar -- not always positive -- connotations. Along the way, Korea, Indonesia, Malaysia, and other Pacific-rim nations have each had their turn at being the preferred low-cost alternative to manufacturing here in the US.
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service