The legacy endpoint devices that control our critical infrastructure (utility systems, water treatment plants, military networks, industrial control systems, etc.) are some of the most vulnerable devices on the Internet. These devices present a vast attack vector thatís not adequately protected. Many of these are:
fixed-function devices that canít be upgraded to add security;
devices that use obsolete operating system (OS) versions that are insecure and canít be upgraded;
real-time OS-based devices that were designed before security was a critical concern and therefore lack sufficient security;
designed for use on private networks but are now connected to the Internet.
Once deployed, these devices remain in use for five, 10, or even 20 years. The cost to replace them all to add security improvements would be staggering. For devices that canít be easily or affordably replaced or upgraded, a ďbump-in-the-wireĒ appliance solution provides the required security.
Some OEMs offer products to protect these legacy devices by creating a ďsecure enclaveĒ in which these devices can operate. Only trusted devices should be deployed within the secure enclave. These devices can freely communicate with each other; however, communication outside of the enclave is controlled for security. The bump-in-the-wire appliance provides security by enforcing communication policies, ensuring that only valid communication is allowed with the endpoints within the secure enclave.
By limiting communication to the secure enclave, the bump-in-the-wire appliance will:
Prevent probes and hacking drones from discovering endpoints. Hackers and automated drones send out ping requests or other messages to a range of IP addresses looking for responses. The appliance drops these requests making the endpoints undiscoverable.
Prevent access from unauthorized machines. Many fixed function devices only need communicate with a few known, trusted hosts. Enforcing these communication restrictions prevents communication with unauthorized machines. If a hacker canít communicate with the endpoint, they canít compromise it.
Close security loopholes. Many cyberattacks utilize services on an endpoint that arenít required for fixed function devices. Blocking unused ports and protocols closes these commonly exploited security loopholes.
Protect against denial of service attacks. By controlling whom the endpoint talks to, DoS attacks are blocked before they reach the endpoint. The endpoints are shielded from malicious traffic and traffic floods, ensuring continued operation even when the network is under attack.
Protects against insider attacks and malware on the corporate network. Endpoints within the secure enclave are sheltered from malicious packets that may be present on the corporate network. With communication restricted to a small set of trusted hosts, malware, insider attacks, or any other malicious activity is blocked. An insider attempting to hack an endpoint from outside the corporate network or from any non-trusted machine will also be blocked, preventing the attack.
Quarantine infected or compromised machines. If the appliance provides bidirectional filtering, it will enable any endpoint infected with malware or compromised by hackers to be quarantined, limiting damage from the attack.
Enhance security for endpoint devices. Fixed function devices, SCADA machines, and other critical endpoints can be grouped into a secure enclave. The communication policies for these machines can be more restrictive than the general policies for the rest of the network. This allows a higher level of security to be enforced for the critical devices on your network. Even if the front end of the corporate network is breached, the individual endpoints are still safe.
The main difference is that our solution will support all TCP/IP traffic, not just HTTP traffic. Our solution also supports flexible filtering rules that can be customized for SCADA and similar devices.
A customer who was thermal printing strip steel had a problem: When the strip's speed increased, the thermo printer would catch fire. When he set a flame to a piece of the strip, he couldn't get it to burn. What was the problem?
Engineers are well positioned to be the leaders for innovation in this new age of machines. Human-centered design enables us to manage the vast amounts of information and the power of technology in solving the worldís problems.