HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Switched-Capacitor Filters: An Introduction

View Comments: Oldest First|Newest First|Threaded View
Cabe Atwell
User Rank
Blogger
app
Cabe Atwell   6/11/2013 5:20:43 PM
NO RATINGS
Jon,

Can you suggest some applications for the filter you describe?

C

Jon Titus
User Rank
Blogger
Switched-Cap Filter Applications?
Jon Titus   6/11/2013 5:41:48 PM
NO RATINGS
You will find switched-capacitor filters (SCFs) in audio circuits, in anti-aliasing filters, and in tracking filters. The latter type of filter can track a signal by adjusting the filter's clock frequency to "tune" filter characteristics as a sampled signal changes frequency. You also can use SCFs in tone-detection circuits. Unlike a PLL circuit that requires external passive components (and trimming) to detect a tone, an SCF requires only a clock signal. SCFs also serve as notch filters.

Because the filtering occurs based on a "master" clock signal's frequency, you might consider an SCF is you want to scan a given bandwidth to obtain information within it at certain frequencies.  The SCFs would act like the front end of a spectrum analyzer.

AnandY
User Rank
Gold
Capacitor ratios
AnandY   6/12/2013 5:16:08 AM
NO RATINGS
So, for an SCF, the frequency response depends solely on the ratio of two capacitors, C and C1, and the switching-clock frequency, fclk.

@Jon, thanks for the very informative post. Capacitor ratios can take advantage of the superior matching of capacitances fabricated on silicon. Especially in monolithic form capacitor ratios are very robust against changes in temperature.

AnandY
User Rank
Gold
Silicon area
AnandY   6/12/2013 5:22:50 AM
NO RATINGS
In a SCF, capacitors and switches take the place of resistors...

High-value resistors can be implemented in very little silicon area. For example, a 1-Mohm resistor can be realized with a 1-pF capacitor switched at a clock rate of 1-MHz.

Partner Zone
More Blogs from Guest Blogs
Design, simulation, manufacturability, and prototyping: All of these phases are being pushed forward and progressively by underlying technologies.
From design feasibility, to development, to production, having the right information to make good decisions can ultimately keep a product from failing validation. The key is highly focused information that doesn’t come from conventional, statistics-based tests but from accelerated stress testing.
There’s a good chance that a few of the things mentioned here won't fully come to fruition in 2015 but rather much later down the line. However, as Malcolm X once said, "The future belongs to those who prepare for it today."
Pressure vessels are part of common equipment utilized in plants to store liquids and gases under high pressure. It is certain that pressurized fluids will develop stresses in the vessel, which when exceeds failure limits, will lead to hazardous incidents and fatalities.
Unlike a mission statement, goals, objectives, and requirements are tools that will be used actively in the sourcing project once it reaches the decision-making stage.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service