You will find switched-capacitor filters (SCFs) in audio circuits, in anti-aliasing filters, and in tracking filters. The latter type of filter can track a signal by adjusting the filter's clock frequency to "tune" filter characteristics as a sampled signal changes frequency. You also can use SCFs in tone-detection circuits. Unlike a PLL circuit that requires external passive components (and trimming) to detect a tone, an SCF requires only a clock signal. SCFs also serve as notch filters.
Because the filtering occurs based on a "master" clock signal's frequency, you might consider an SCF is you want to scan a given bandwidth to obtain information within it at certain frequencies. The SCFs would act like the front end of a spectrum analyzer.
So, for an SCF, the frequency response depends solely on the ratio of two capacitors, C and C1, and the switching-clock frequency, fclk.
@Jon, thanks for the very informative post. Capacitor ratios can take advantage of the superior matching of capacitances fabricated on silicon. Especially in monolithic form capacitor ratios are very robust against changes in temperature.
Using Siemens NX software, a team of engineering students from the University of Michigan built an electric vehicle and raced in the 2013 Bridgestone World Solar Challenge. One of those students blogged for Design News throughout the race.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.