HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Design Decisions: Implementing Adsorbent Technology

NO RATINGS
Page 1 / 2 Next >
View Comments: Newest First|Oldest First|Threaded View
William K.
User Rank
Platinum
Microgram madness, or monstrous metallic mercury
William K.   5/3/2013 11:53:48 PM
NO RATINGS
So, what is the concentration of mercury vapor in ten cubic feet of air near where a single CFL device has been broken ? and where in the lamps does this 3 micrograms reside in the lamp, and why would it be in a vapor form at normal room temperatures? My observation of the broken lamps that I have seen is that there are quite large chunks and a few small slivers. I know that the slivers can be nasty and sharp, but clearly most of the white stuff is still in the glass. So where does all of this huge cloud of mercury vapor come from?

OF course it is best to avoid breaking the lamps, but this writeup seems to be intent on arousing hysteria and fomenting panic. If we went back to using candels for light the big hazard would be setting fires, which are probably a lot more dangerous.

I am not advocating stupidity, and I would never allow children to play with broken lights, but the whole tone of the article seems inappropriate for an intellectual publication such as Design News.

Cabe Atwell
User Rank
Blogger
Re: Mercury replacement
Cabe Atwell   5/3/2013 3:24:16 PM
NO RATINGS
I'm with TJ on this, time to go LED. There are plenty of LED solutions much brighter than FL and CFL is the same size category.

However, I wish I had this tech when I watched one of my ceiling CFLs spark and expel fumes for a few minutes.

C

AnandY
User Rank
Gold
Mercury replacement
AnandY   5/3/2013 7:41:14 AM
NO RATINGS
It is considered a persistent bioaccumulative toxic chemical as it does not degrade in the environment.

Todd, thanks for this informative post. Till now I thought glass pieces of broken bulb are dangerous, but mercury inside it is so dangerous. Can this mercury be replaced by any other material?

TJ McDermott
User Rank
Blogger
Why is it still there?
TJ McDermott   5/2/2013 11:05:56 PM
NO RATINGS
I must have been exposed to too much mercury because I cannot understand why these HAZMAT hand grenades have been mandated into our houses and workplaces.

Lead was legislated out of paint long ago.  So were volatile organic compounds (VOCs) which made paint spread much better.

This article addresses the handling after the fact.  Why not instead legislate a bulb that isn't a HAZMAT Hand Grenade?  Skip this crap and instead force us to LED bulbs?

 

Rob Spiegel
User Rank
Blogger
The cost of absorbing mercury
Rob Spiegel   5/2/2013 12:33:50 PM
NO RATINGS
Interesting story, Todd. I would guess the packing that absorbs mercury costs quite a bit more than traditional packaging. I wonder whether this will affect its use. Unless there is a government mandate, it could be this packaging will not be widely utilized.

Partner Zone
More Blogs from Guest Blogs
Iterative design — the cycle of prototyping, testing, analyzing, and refining a product — existed long before additive manufacturing, but it has never been as efficient and approachable as it is today with 3D printing.
People usually think of a time constant as the time it takes a first order system to change 63% of the way to the steady state value in response to a step change in the input -- it’s basically a measure of the responsiveness of the system. This is true, but in reality, time constants are often not constant. They can change just like system gains change as the environment or the geometry of the system changes.
At its core, sound is a relatively simple natural phenomenon caused by pressure pulsations or vibrations propagating through various mediums in the world around us. Studies have shown that the complete absence of sound can drive a person insane, causing them to experience hallucinations. Likewise, loud and overwhelming sound can have the same effect. This especially holds true in manufacturing and plant environments where loud noises are the norm.
The tech industry is no stranger to crowdsourcing funding for new projects, and the team at element14 are no strangers to crowdsourcing ideas for new projects through its design competitions. But what about crowdsourcing new components?
It has been common wisdom of late that anything you needed to manufacture could be made more cost-effectively on foreign shores. Following World War II, the label “Made in Japan” was as ubiquitous as is the “Made in China” version today and often had very similar -- not always positive -- connotations. Along the way, Korea, Indonesia, Malaysia, and other Pacific-rim nations have each had their turn at being the preferred low-cost alternative to manufacturing here in the US.
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Nov 17 - 21, Analog Design for the Digital World
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service