HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Design Decisions: Understanding the Value of Integrated System Design

NO RATINGS
Page 1 / 2 Next >
View Comments: Oldest First|Newest First|Threaded View
TJ McDermott
User Rank
Blogger
This is a good blog
TJ McDermott   4/1/2013 8:45:06 PM
NO RATINGS
Mr. Fleischer, thank you for a good white-paper blog.  You did not make it an advertisement for your company or products.  Granted, the image shown was likely your product, but it in no way sold that product or even identified it.  It was a good example of integrated system design.

William K.
User Rank
Platinum
Integrated system designs OR manifold destiny
William K.   4/2/2013 5:09:27 PM
NO RATINGS
It is certainly true that for many systems that utilize either hydraulics, or pneumatics, that using a manifold for some of the interconnects can provide a much more compact system that is both more reliable and less expensive. In fact, this holds true for both mass production and one-off systems, which is unusual. Of course the down side is that the system must be defined prior to the manifold being designed, since most manifolds are difficult to revise. But once a system is accurately defined a well designed manifold will usually provide a cost reduction, and almost always provide better reliability.

Partner Zone
More Blogs from Guest Blogs
Asking yourself the simple question, “Is this a strength problem or a stiffness problem?” can prevent many design mistakes.
In November, a European space probe will try to land on the surface of a comet moving at about 84,000 mph and rotating with a period of 12.7 hours. Many factors make positioning the probe for the landing an engineering challenge.
Mistakes in power distributions are not all that common, but they do exist. We look at some of these mistakes and disaster scenarios with the intention being to inform readers to be wary of repeating such mistakes when designing their power distribution system.
What do gears, bearings, and shafts have in common? For one thing, they're often made out of steel. For another, they're subject to a failure mode known as rolling contact fatigue.
The Smart Emergency Response System capitalizes on the latest advancements in cyber-physical systems to connect autonomous aircraft and ground vehicles, rescue dogs, robots, and a high-performance computing mission control center into a realistic vision.
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development – A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service