Design Decisions: Understanding the Value of Integrated System Design
This diesel engine emission control module manages fuel, air atomization, and air purge functions. Integrated into this assembly are two solenoid valves, two pressure regulators, three pressure transducers, a fuel injector, and precision orifice. The compact design and simplified mounting provide a distinct advantage over having to connect and mount individual components on a truck chassis.
It is certainly true that for many systems that utilize either hydraulics, or pneumatics, that using a manifold for some of the interconnects can provide a much more compact system that is both more reliable and less expensive. In fact, this holds true for both mass production and one-off systems, which is unusual. Of course the down side is that the system must be defined prior to the manifold being designed, since most manifolds are difficult to revise. But once a system is accurately defined a well designed manifold will usually provide a cost reduction, and almost always provide better reliability.
Mr. Fleischer, thank you for a good white-paper blog. You did not make it an advertisement for your company or products. Granted, the image shown was likely your product, but it in no way sold that product or even identified it. It was a good example of integrated system design.
Practically all electronic devices today contain metals that may
be coming from conflict-ravaged African countries. And political pressures will increasingly influence how these minerals are sourced and used in products.
Design for manufacturing (DFM) in mold production means that mold designers evaluate the manufacturability of their molds in the early stage of mold development by collecting all relevant information and applying it to their designs. They also have to consider many other factors, including flow balance, structural stress, and assembly tolerance, in order to ensure successful molding production.
Some adhesives provide strong structural bonds but take hours to fixture and attain handling strength. The technologies that offer the fastest cure do not bear loads or withstand stresses. A new class of adhesives aims to make both stick.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.