HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Fastener Inserts Designed for Lightweight Aerospace Materials Reduce Risks, Costs

NO RATINGS
Page 1 / 3 Next >
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/2
Jerry dycus
User Rank
Gold
Fasteners in composites
Jerry dycus   12/27/2012 10:10:03 AM
NO RATINGS
 

              I'm not sure anything in this article is new as much if not all of it has been known for 50-100 yrs!!

              In composites one doesn't cut threads for either bolts or inserts if one is smart but instead molds them with epoxy, etc in place giving good holding and locking in many cases.  If a sandwiched material one hollows out the foam/etc core and fill it with epoxy to spead the load, then insert the bolt, insert, etc as needed.

              In other plastics drilling a smaller hole then screwing a hot bolt, insert into it  gives the needed strength in many cases.

              If higher loads than the local material can handle glue on a reinforcement piece with the threads built into it.

              As for working loose there are many types of thread lockers out there.

           

<<  <  Page 2/2
Partner Zone
More Blogs from Guest Blogs
In November, a European space probe will try to land on the surface of a comet moving at about 84,000 mph and rotating with a period of 12.7 hours. Many factors make positioning the probe for the landing an engineering challenge.
Mistakes in power distributions are not all that common, but they do exist. We look at some of these mistakes and disaster scenarios with the intention being to inform readers to be wary of repeating such mistakes when designing their power distribution system.
What do gears, bearings, and shafts have in common? For one thing, they're often made out of steel. For another, they're subject to a failure mode known as rolling contact fatigue.
The Smart Emergency Response System capitalizes on the latest advancements in cyber-physical systems to connect autonomous aircraft and ground vehicles, rescue dogs, robots, and a high-performance computing mission control center into a realistic vision.
Businesses cutting across industries are increasingly making use of portable display stands in the UK for marketing.
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service