HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs

Stop Expenses From Leaking Away

NO RATINGS
View Comments: Threaded|Newest First|Oldest First
warren@fourward.com
User Rank
Platinum
Leak s
warren@fourward.com   12/19/2012 2:53:19 PM
NO RATINGS
This got me to thinking about hurricane Sandy.  Maybe we should be giving more attention to hurricane and tornado prone areas when we supply or design equipment.  Perhaps this should be part of the design criteria, especially with critical systems.  I am not sure we can design for total submersion, but certainly we can design for damp.  Power stations, police and fire communicatons

Plus, when a sprinkler system goes off, there is no reason it should automatically destroy everything.

But, there is a cost involved.  And that may make it not worth it.

NadineJ
User Rank
Platinum
Re: Leak s
NadineJ   12/19/2012 7:41:44 PM
NO RATINGS
Warren, your post makes me think of the phrase "penny wise, pound foolish"

warren@fourward.com
User Rank
Platinum
Re: Leak s
warren@fourward.com   12/19/2012 7:57:34 PM
NO RATINGS
Yea, you're right.  You can't plan for everything.  I guess we design around the 90th percentile customer and let it go from there.

However, if we just waterproofed the water cooler...

Cabe Atwell
User Rank
Blogger
Re: Leak s
Cabe Atwell   12/20/2012 1:33:37 AM
NO RATINGS
Complete environment sensing is starting to appear everywhere. Attending Sensor Expo earlier this year really showed the initiative in the area. Several companies are showing off their wireless sensor and monitoring services with much gusto. They all make you feel like water, pressure, heat and the like are out to destroy all you design and love. Hopefully, tech like this can be integrated in everything in the future. Every device, a smart monitoring device.



William K.
User Rank
Platinum
Re: Leak s
William K.   12/21/2012 2:46:44 PM
NO RATINGS
Sprinkler system leaks can certainly cause a huge inconvenience and quite a bit of economic loss. BUt the good news is that the technology to report them is fully mature and has been available off the shelf for quite a few years. The unfortunate fact is that because that hardware does not usually show a profit, (ROI), a lot of the MBA types will refuse to spend the extra money to mitigate a disaster.

That was the case when I worked at Delphi Diesel Aftermarket. The sprinkler pipe rusted through due to inadequate maintenance, and the resulting flood drenched the computer center for three days, damaging not only the server and records systems, but destroying a new "D" sized printer.

I suggested a sprinkler monitor package to the manager, who explained to me that since the expenditure would not add to the groups profits, he would not spend any money at all to add it to the existing fire and security system. So he left that building all set up for another flood, since the only maintenance done was to patch that particular leak. It seems that short-term thinking must be a major part of some MBA programs.

bobjengr
User Rank
Platinum
WATER LEAKAGE AND COST OF REPAIR
bobjengr   12/23/2012 5:23:09 PM
NO RATINGS
 

Emily--Excellent post.  One of my very first jobs after my military experience was as an engineer with a water heater manufacturer.   Leakage from the containment vessel was common place and there was never a week that went by where we did not receive complaints regarding tank leakage.  The most catastrophic were those leaks occurring in high-rise apartments.  Even a small leak can do significant damage to all areas below the problem.  Drip pans can hold only so much water and even those pans piped to a suitable drain can present a huge problem.  Oddly enough, the biggest problems occurred when repair men replaced heating elements and did not sufficiently seat the element seal against the tank itself.   Pin-hole leaks can also occur in weldments due to rust and dilatation of the vessel due to internal pressure.  A "warning system" would have been great to monitor internal pressure so that upstream solenoids could activate and shut off the water.  Even then, the contents of the tank could empty but that would not present the problem continuously running water would give. 

Nancy Golden
User Rank
Platinum
leak notification
Nancy Golden   12/30/2012 1:14:33 AM
NO RATINGS
I think the individual alert mentioned is particularly important. Any leak detection system should have a mobile alert methodology, be it a cell phone app or something similiar (with built in redundancy) - otherwise whatever method being used for leak notification may go undiscovered until too late...

Partner Zone
More Blogs from Guest Blogs
Iterative design — the cycle of prototyping, testing, analyzing, and refining a product — existed long before additive manufacturing, but it has never been as efficient and approachable as it is today with 3D printing.
People usually think of a time constant as the time it takes a first order system to change 63% of the way to the steady state value in response to a step change in the input -- it’s basically a measure of the responsiveness of the system. This is true, but in reality, time constants are often not constant. They can change just like system gains change as the environment or the geometry of the system changes.
At its core, sound is a relatively simple natural phenomenon caused by pressure pulsations or vibrations propagating through various mediums in the world around us. Studies have shown that the complete absence of sound can drive a person insane, causing them to experience hallucinations. Likewise, loud and overwhelming sound can have the same effect. This especially holds true in manufacturing and plant environments where loud noises are the norm.
The tech industry is no stranger to crowdsourcing funding for new projects, and the team at element14 are no strangers to crowdsourcing ideas for new projects through its design competitions. But what about crowdsourcing new components?
It has been common wisdom of late that anything you needed to manufacture could be made more cost-effectively on foreign shores. Following World War II, the label “Made in Japan” was as ubiquitous as is the “Made in China” version today and often had very similar -- not always positive -- connotations. Along the way, Korea, Indonesia, Malaysia, and other Pacific-rim nations have each had their turn at being the preferred low-cost alternative to manufacturing here in the US.
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service