HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Blogs
Guest Blogs

Fluid Power Systems: The Hidden Giant

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
GlennA
User Rank
Gold
hydraulics vs working applications
GlennA   6/18/2012 9:34:11 AM
NO RATINGS
Hydraulic robots have become few and far between (in my experience).  The rationale that I was told was because of the automotive industry.  Automotive is a big user of robots.  When robots were hydraulic, 3 (sometimes 4) trades were required to work on them.  The electrician for the controller, the millwright for the hardware, or for tooling issues (sometimes a tool-maker also), and a plumber for the hydraulics.  The all-electric robot eliminated one trade from that group.

The manipulator arm on the Space Shuttle was a 'hydraulic' application = high torque and low speed.  Clean-room issues i.e. hydraulic oil leaks would have been a problem.  A broken wire does not 'leak' electricity in the same way a broken hose would leak oil.

One thing that I think is missing from your hydraulic system is the unloading valve.  Many of the machines that I have worked on had an unloading valve to direct flow to the tank at low pressure to reduce heating when the system was in standby.

TJ McDermott
User Rank
Blogger
Each has its place
TJ McDermott   6/18/2012 1:57:58 PM
NO RATINGS
Hydraulic vs. Electric is not a winner-take-all competition.  Each has roles in which it is better suited.  One of my customers offers products that use either one or the other as the prime mover, depending on application.  It means more engineering work for my customer, but their end users are happy with a solution that fits their needs, rather than adjusting their needs to fit a single solution.

 

Alex.W
User Rank
Iron
Re: hydraulics vs working applications
Alex.W   6/19/2012 1:51:55 PM
NO RATINGS
I think the variable speed drive would negate the need for an unloading valve, assuming there were no other loads requiring driving while this subset of the machine is in standby.

crob09
User Rank
Iron
Re: hydraulics vs working applications
crob09   6/19/2012 4:44:37 PM
NO RATINGS
No you still need an "unloading valve" or Bypass valve, no different from an electric forklift. The PTO is variable speed and the unloading valve is still necessary when the load is too great, or if the cylinder has reached it's maximum travel. Otherwise you would burn out the PTO or motor.

Rob

http://www.whatisacnc.com

GlennA
User Rank
Gold
Nomenclature
GlennA   6/20/2012 8:43:31 AM
NO RATINGS
An unloading valve is not the same as a relief valve or a regulating valve.  From my training:  An unloading valve is used to direct all flow from the pump to the tank at low pressure to reduce heating, and to allow the electric motor / pump to start under no-load.  A relief valve is used to control maximum system pressure.  When the maximum pressure is reached, the valve opens to direct flow to the tank without reducing the pressure.  A pressure reducing valve, also called a regulating valve, is used to reduce pressure to a segment of the system.  Not everyone that works in hydraulics agrees with the nomenclature that I learned.

Instead of a variable speed motor, I have seen pressure and flow compensating pumps that have a swash plate that is adjusted to reduce the flow from the pump without affecting the pressure, at a constant electric motor speed.

Partner Zone
More Blogs from Guest Blogs
Connected sensor-enabled applications will improve the consumer experience -- and generate new revenue streams.
As an industry, we now need to up our game and provide contractors with easier ways to properly identify and report counterfeit products and build collaboration between manufacturers, design engineers, industry organizations, and government.
Itís your job to find the right people, ask the right questions, to dig deeper, and properly prepare your users so they can provide you the most useful and productive answers possible.
The shift to aluminum is gaining momentum and the demand from automakers for aluminum is soaring, "expecting to reach one billion pounds this year, up from 200 million in 2012, and to grow by more than 30% annually through 2020."
Einstein in a Box inspires critical thinking with the actual doing and experiencing. They take the statement "inquiring minds want to know" to a whole new level.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service