HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Guest Blogs
Fluid Power Systems: The Hidden Giant
6/18/2012

Return to Article

View Comments: Newest First|Oldest First|Threaded View
GlennA
User Rank
Gold
Nomenclature
GlennA   6/20/2012 8:43:31 AM
NO RATINGS
An unloading valve is not the same as a relief valve or a regulating valve.  From my training:  An unloading valve is used to direct all flow from the pump to the tank at low pressure to reduce heating, and to allow the electric motor / pump to start under no-load.  A relief valve is used to control maximum system pressure.  When the maximum pressure is reached, the valve opens to direct flow to the tank without reducing the pressure.  A pressure reducing valve, also called a regulating valve, is used to reduce pressure to a segment of the system.  Not everyone that works in hydraulics agrees with the nomenclature that I learned.

Instead of a variable speed motor, I have seen pressure and flow compensating pumps that have a swash plate that is adjusted to reduce the flow from the pump without affecting the pressure, at a constant electric motor speed.

crob09
User Rank
Iron
Re: hydraulics vs working applications
crob09   6/19/2012 4:44:37 PM
NO RATINGS
No you still need an "unloading valve" or Bypass valve, no different from an electric forklift. The PTO is variable speed and the unloading valve is still necessary when the load is too great, or if the cylinder has reached it's maximum travel. Otherwise you would burn out the PTO or motor.

Rob

http://www.whatisacnc.com

Alex.W
User Rank
Iron
Re: hydraulics vs working applications
Alex.W   6/19/2012 1:51:55 PM
NO RATINGS
I think the variable speed drive would negate the need for an unloading valve, assuming there were no other loads requiring driving while this subset of the machine is in standby.

TJ McDermott
User Rank
Blogger
Each has its place
TJ McDermott   6/18/2012 1:57:58 PM
NO RATINGS
Hydraulic vs. Electric is not a winner-take-all competition.  Each has roles in which it is better suited.  One of my customers offers products that use either one or the other as the prime mover, depending on application.  It means more engineering work for my customer, but their end users are happy with a solution that fits their needs, rather than adjusting their needs to fit a single solution.

 

GlennA
User Rank
Gold
hydraulics vs working applications
GlennA   6/18/2012 9:34:11 AM
NO RATINGS
Hydraulic robots have become few and far between (in my experience).  The rationale that I was told was because of the automotive industry.  Automotive is a big user of robots.  When robots were hydraulic, 3 (sometimes 4) trades were required to work on them.  The electrician for the controller, the millwright for the hardware, or for tooling issues (sometimes a tool-maker also), and a plumber for the hydraulics.  The all-electric robot eliminated one trade from that group.

The manipulator arm on the Space Shuttle was a 'hydraulic' application = high torque and low speed.  Clean-room issues i.e. hydraulic oil leaks would have been a problem.  A broken wire does not 'leak' electricity in the same way a broken hose would leak oil.

One thing that I think is missing from your hydraulic system is the unloading valve.  Many of the machines that I have worked on had an unloading valve to direct flow to the tank at low pressure to reduce heating when the system was in standby.

Partner Zone
More Blogs from Guest Blogs
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Procurement actually means well. There is no question that procurement can do a better job of phrasing their questions or making connections between engineering’s goals and the processes underway. And if you are using the right deciphering code, the result can live up to -- or surpass -- your expectations.
Internal combustion engines are ruling power generation applications even today, and improvising them to churn out every slice of power is still an area of research for the engineering community.
If you are interested in adding FPGA technology to you engineering toolkit, grab some free tools and an evaluation kit and get started on your own FPGA project. It never hurts to expand your engineering toolbox, and FPGAs are only going to become more popular over the next few years.
With the growing demand for new-age applications, corrosion has become an inherent problem. Not only do epoxies confer excellent corrosion resistance, they are also easy to handle and process. However, one must be mindful of selecting the right epoxy system along with the appropriate application techniques for best results.
Design News Webinar Series
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jan 26 - 30, IPv6 for Micros – Hands-On
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Stratasys
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service