Rich Quinnell, editor in chief of Microcontroller Central, created an LED hand message board to display a message in the air.
Using persistence of vision, the LEDs trace out a message in mid-air when the hand is waved back and forth. Rich got the idea after a reader sent in a picture of himself waving a circuit board with LEDs that displayed a message in the air. He modified the original software so he could have a choice of different messages.
Rich Quinnell's hand message board uses LEDs to trace out a message in mid air when the hand is waved back and forth.
Some improvements Rich suggests are adding a keyboard for an unlimited amount of messages, and to make the one inch of text space bigger so the messages can be seen from further distances.
The editors of Design News have handpicked your favorite Gadget Freak cases from over the years, bringing them together in a dynamic digital edition, complete with videos, which you can view here.
Nicely done, Rich. I have seen similar message units that use an accelerometer to start and stop the display, but you did the job with a small MSP430 board. Clever. --Jon
Jon, thanks. The board does have an accelerometer and it is what triggers the display. It was a challenge, though, separating out the gravity signal from the motion signal. Also, I owe a lot to my blogger Ryszard Milewicz, who started this with a program that displayed the I heart MCC message when he waved it around in his hand. I "featureized" it a bit, adding the multiple message capability and adjusting the display timing somewhat. Oh, and it's my hand.
Thanks. Fortunately I didn't have to do it from scratch, and my code would probably make a grown C programmer cry, but I was able to do what I wanted with it.
Hi Rich, Very clever approach to developing a cool embedded product. The method of modifying code to change the product functional behavior is what I discuss with my ITT Tech Electrical Engineering Tech students every class period. I often use this rapid development method for embedded devices and gadgets I create in my home lab as well. Very cool project!!!
Some of my code would make a grown C programmer cry too, RichQ. What some folks might call "spaghetti code" I prefer thinking of as "thinking outside of the box" :) Besides, since I am Italian, the moniker fits in my case LOL
Rather than reinventing the wheel - you simply readjusted it - a great time saver that still took tech know-how - Great job!
Clever, but not a new idea. I saw an LED message wand at Toys R Us many years ago. The message was several inches high, and it included a built-in keyboard.
Instead of pine, it might be better to use styrofoam. Seams the weight would waer on your wrist after a while. Another improment would be to use a spring steel joint between the handle and the "hand". That way, a little motion would set the hand into action with less strain on the wrist. Just a though for anyone concidering to build this.
The foam is a good idea. I had to make this in short order out of supplies around the house and tried using some springy stuff for the wrist but it was hard to get a consistent movement, so just made it rigid. Not a new idea, I know, but had fun with it.
My kids had such a toy MANY years ago. You swung this paddle shaped object back-and-forth and it displayed your keyed in text using LED's. In the dark your eyes provided the persistence to make a stable image.
(My youngest is about to turn 39 years old... so this was quite a long time ago.)
I saw it already on TV several years ago, possibly the "Gizmodo" gadget that someone else mentioned. It may have been a news item from a Consumer Electronics show at the time.
I remember that it was displaying messages from a keyboard buffer and the display was moving left and right on the tip of a large metronome.
I saw a fun one a few years ago for the 4th of July. It was a battery operated fan that would display animation of fireworks when the fan was running. The fan blades were a flex circuit with RGB LEDs that produced the animation. I wanted to say that it was a very cool toy, but that would be an awful pun even if it wasn't intended.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
