Most dishwashers come equipped with an indicator that lets people know when the dishes have gone through a complete washing cycle. Some people will open the dishwasher and get some clean dishes, but they won't unload it completely. The "clean" indicator will turn off, but people might not know whether the dishes are clean.
This gadget uses a flashing green LED to let people know the dishes are clean. An infrared proximity sensor detects the presence of a person near the dishwasher and turns on the LED circuit. The LED state remains set until someone completely empties the dishwasher. Even after you open the door and take out only a few dishes, the green LED will flash when people approach the dishwasher, so they see a reminder to unload it completely.
After the dishwasher is emptied, a red LED starts flashing, and people can start to load it with dirty dishes. Now no one will have any doubt about whether the dishwasher is full of dirty or clean dishes. The indicator tells it all.
Jitendra Tailor's gadget uses a proximity sensor and a flashing LED to alert his family members when to unload clean dishes from the dishwasher or load it with dirty dishes.
Here are the mounting positions of the LEDs and the infrared proximity sensor on the outside of the diskwasher's kick plate.
Nancy, I agree this gadget would be a value-add for a dishwasher. How did the magnet work out? In my house, my kids (teenagers now) would forget to flip the magnet. I would end up washing the same dishes two or three times. I just know it.
The build instructions explain that a 4.65 minute timer is used. The assumption is that it takes about that long to unload the DW. If you just open to grab a cup, the timer won't run long enough to set the red LED.
This is actually a pretty good and patentable project.
Kevin, according to the instructions provided, the system doesn't know directly if you have taken some or all of the clean dishes out. It has a timer programmed such that if the door is 4.65 minutes in the horizontal position, the dishwasher has been fully unloaded, and less time indicates that only a few dishes have been removed. You can program the system to a different duration, if desired.
Those are really valid things when you have responsible people that utilize the dishes. Try telling that to a 2 year old, a 6 year old and an autistic adult that works on the level of about 4 years old. Unfortunately that is not real life so you try and find the solutions that will make life easier. Hey which is the reason we are engineers in the first place...imagine that!
The vision system is the operator. The first one to the dish washer empties so it's ready for the next dirty item. No excuses.
What I would like to see is a condensing unit added to dish washers to condense the steam and allow it to be drained with the other water. Thus, when the "I'm done" light comes on and you open the door you don't get a blast of steam on your glasses and add humidity to your house, especially in the summer when you're paying the air conditioner to remove heat and humidity. It would also eliminate the water that has re-condensed into the depressions in cups, etc. Seems lke a compressor, agitation fan, and a condensing coil that would fit in your hand would do the job. Then when the "I'm done" light comes on it would indicate the humidity is gone the dishes are safe to transport . . .Simple. Still the first one to need something from the dish washer empties it.
The final showdown is under way in our first-ever Gadget Freak of the Year contest. Who will win an all-expenses-paid trip to the Pacific Design & Manufacturing Show? It's up to you, dear readers, to tell us.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.