Matt Oppenheim has developed a radio that speaks to an Android smartphone. He designed the gadget to help the visually impaired learn the layout of a new device. Push a button on the radio, and it speaks its function.
Oppenheim took an Arduino Uno, touch-sensor shields, and a USB shield and connected them to a Nexus One Android phone. He added the audio-enhanced touch sensors to the radio. When a control is touched, the phone plays an audio tag describing the function.
Matt Oppenheim has devised a radio that speaks to an Android smartphone to help the visually impaired learn the layout of a new device.
Without having to be activated, an audio tag describes a function when a control is touched.
Another application I considered was on the controls of e.g. a crane, so that the operator did not have to take his eyes off the load while finding which button or lever he needed. This would be more useful in training, as an experienced operator probably wouldn't need the voice prompt anymore.
I found in testing that once folk learned the layout of a new device using the audio tags, the voice then became annoying. So you need an 'off' switch!
That's funny NadineJ. I was out there trying not to look at the sun yesterday. It was hard to resist. I couldn't see much. I tried the hole in the paper, but that wasn't very exciting. Finally I went to the CNN site to get a good view.
Great to see that the Blind are now able to use Android too. Here at Industries for the Blind, all our people use iPhones because iOS has always had this capability built into the system. Our blind workers are able to navigate their iPhones faster than I can. They just go into Settings > General > Accessibility > and turn 'Voice Over' ON.
What a cool and beneficial device to aid the blind in using Consumer Electronic products. The Arduino is a great electronics hardware platform to use in developing all types of innovative consumer and industrial products. In terms of Smartphone applications, I'm developing a robot controller device using a Motorola DroidX smartphone, a LEGO NXT, and an Arduino. By touching the DroidX screen, I can control motors, LEDs, or high current devices with an Arduino being the primary control driver using Bluetooth tech. This controls application project is being develop for an Arduino book I'm currently writing for Apress books.
Thanks for your interest in the device. The electronics is so cheap to implement that I hope that manufacturers will implement it in their products as a routine, to help folk who can't see the controls easily.
Now the next thing that it needs is a way to announce the control function before the control is activated. That would be useful in that it would be able to avoid pushing the wrong button, not just telling someone what they did. Not needed so much on a phone, but certainly valuable on a crane, or driving a car, both places where a wrong command can be very inconvenient. Of course, most cranes don't use touch controls simply because they are both non-determinant and too subject to erronious actuation. In addition, a crane operator does have the time to make sure they have the correct control in hand.
This is exactly what the device does already. The touch sensors activate before the control is pushed, allowing the user to select the correct control before operating it. I make this clear at the start of the video.
Thanks for sharing your invention. As it was stated this can be used in so many other applications. I could see it being used in learning toys for children. Ardunio seems to be the duck tape of electronics. Lol. My class uses them for various types of labs, they are great.
Coupling sound tags to touch sensors is nothing new - what I aimed to do here was present an implementation using easily available off the shelf boards and an Android phone. Prior to this I have had to spin my own boards to produce multi-channel touch sensors.
Ross Tsukashima and Ha Le Cao wrote an article for the June 2006 edition of Circuit Cellar which coupled toys to touch sensors and a speech board to help teach children language.
My Arduino and Android code can be downloaded from here:
I have indeed found that using eplorer will allow me to play some of those videos, but after the last explorer upgrade it does not work any more. I have not looked into just why because mostly Chrome is OK for what I do.
The Attack Dyno brings car enthusiasts an attack timer and dynamometer in a small, portable package with the ability to output vehicle torque, speed, horsepower, 1/4 mile times, 0-60 mph acceleration times, ambient air temperature, and more.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.