Doug Conner trains with his triathlete group in an outdoor pool. His start time is 6:00 a.m., and during half of the year, it’s still dark out then, so he can’t see the analog clock. To fix this, Doug created a waterproof timer he can place at the edge of the pool.
The nighttime swim timer uses a battery-powered microcontroller with a crystal time base that drives a four-digit, seven-segment LED. The microcontroller takes care of all aspects of timing and display, including driving the LEDs. The half-inch digits make the display easy to read from 10 feet away.
Doug Conner created a digital timer so he could check his pace on his 100-meter laps in the dark.
The timer is encased in a transparent, waterproof polycarbonate tube and can go to the bottom of the pool without leaking.
The editors of Design News have handpicked your favorite Gadget Freak cases from over the years, bringing them together in a dynamic digital edition, complete with videos, which you can view here.
Ah, Tool Maker, you're right. I have a brother who lives in Illinois and he's continually pointing out these ridiculous suits. He says he's reached the point where he doesn't say nice things when a friend talks about a son or daugher who is going to law school.
The microcontroller used is an Atmel atmega328P, better known as the microcontroller used in the Arduino. The swim timer is compatible with the Arduino integrated development environment so it makes it easy to modify the code. As I recall the timer code uses around 10% of the 32kbytes of program memory.
Really cool device, but if you ever market it to the public, make sure you enclose a disclaimer that you are not encouraging "Night swimming alone." I can see hoards of hungry attorneys waiting to sue your socks off because some yahoo drowned while night swimming by him/herself as your device allowed them to do.
Don't laugh. You would not believe some of the ridiculous law suits processed in our neighboring state of Illinois.
Good point, Doug. Yet, since you created the gadget specifically for night use, you probably didn't see the need to make a display that would work during sunlight. I would guess you had that solved through a wristwatch or other daylight device.
Using red plastic over the display to improve daylight visibility would be an interesting experiment. The visibility in direct sunlight is not good, but then I use the large unlighted timers around the pool when there is daylight. Improving the daylight visibility would make the timer more versatile.
A level switch sure would be simple. I think it wouldn't be suitable for the power switch because it could easily turn on when shifting around in my swim gear bag.
The timer is visible through the water when it is underwater, but that's not how I normally use it.
You can modify the code for count-down timing. I've thought of doing that so that when I want to time a set of laps I can have say a 3 second count-down from when I flip the switch to when I need to launch.
The code in the Arduino is only using about 10% of the program memory so there is lots of space for modifications.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
