It was only recently that James Hartnett came across Nixies -- those tubes for displaying numerals. James loved "that awesome display with the 3D-look and the glow of a tube-like device." When he found one, he instantly decided that he needed to make a clock. He found a Nixie Tube-based Volt Meter. "Volt meter" is a bit misleading -- it's actually a "millivolt meter," said Hartnett. When he decided to turn it into a clock, a Gadget Freak was born -- or created.
The circuit and breakboard.
What the display will look like.
Table 1: Allied Parts List
Allied Part #
Resistor; Carbon Film; Res 1 Ohms; Pwr-Rtg 0.25 W; Tol 5%; Axial; Cer-Core
Note: I did not include a zero-correction resistor in the BOM since it was specific to my meter. You can find a suitable value for your equipment or adjust the zero on the hardware, which will have to be re-adjusted before using it to measure voltages.
This isn't playing with Nixies. Buying Nixies, wiring tube sockets and getting a bite from the high voltage is playing with Nixies.
While interesting that this project outputs an analogue voltage which sometimes represents the correct time, not actually using the Nixie tubes directly kind of takes the fun out of it. You can use any dvm for this and that would be interesting in and of itself.
But what's the point if you don't risk getting a mild shock from playing with the circuit? And if you don't actually use nixies how are you going to learn anything?
Building a display with nixies is not a big deal, just some high volt switching transistors like a mpsa 42 or 92 tied to the output of the driver chip, whether it's a clock or voltmeter or a random number generator.
I've worked with vacuum tubes my entire life and there is a lot more fun to be had lighting them up and making them do something useful or even unnecessarily useful.
You haven't lived unless you've been bitten by 30KV off a color CRT.
Readers might be entertained by a Nixie-tube artwork I made many years ago, using 4 "giant" Nixie tubes--reputed to have come from the NY Stock Exchange when they upgraded. I attach a photo; the piece is about 4 1/2 feet tall. I programmed it to deliver 512, 4-letter words arranged into droll and mildly insulting sentences/paragraphs, all decent. It sold immediately from a gallery, to a realtor who put it in her office for the entertainment of her customers. I wish I still owned it...
My husband serendipitously mentioned nixie tubes the other day, so I couldn't resist sharing his experiences with them
His dad was a Heathkit hobbyist back in the early seventies who also made a few digital clocks, a few of them sporting these very tubes. Hie remembers his dad designing the board layout from circuits pre-designed by an engineer friend, and then etching the patterns in an acid bath in the kitchen. Soon, my husband was drafted by Dad to solder the components onto the boards. Eventually, the move was made over to LEDs for reasons of power efficiency, but he says he still missed that yellow glow.
Ever wanted to see light beyond what's detectable by the human eye? You can with DOLPi - a homemade Raspberry Pi-based polarization camera. You can even use it to detect unseen objects like landmines, IEDs, pollutants, and maybe even UFOs.
A Design News contributor takes on the challenge of building an old-fashioned metric clock that uses French Revolutionary time, which divides the day into decimal units, and shows you how to build your own.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.