Andy Morris has solved an aggravating problem. You can get a remote control for tower fans, but they’re too noisy for the bedroom. Propeller fans are nice and quiet, but they don’t come with remotes. So Andy devised a propeller fan remote control that does not require line-of-sight, which makes it easier to use in the dark.
The gadget comes with off/on, three fan speeds, and multicolored LEDs to indicate the fan’s speed. As a bonus, it beeps to indicate that the fan got your message.
The editors of Design News have handpicked your favorite Gadget Freak cases from over the years, bringing them together in a dynamic digital edition, complete with videos, which you can view here.
Alternate sources for the remote control to be hacked up:
Home Depot Westek Model # RFK306LC Store SKU # 567861
Home Depot (Christmas season only) Home Accents Holiday Model # RC-009A-1 Store SKU # 202620 (Same as above units, but has two outlets).
Lowe's SKU # 0357410 (Christmas season only) It is the same as the Home Depot Christmas version, but has a smaller remote, that is electrically identical to the remote used in this gadget.
Both seasonal remote control systems will work in this project, and both cost $10.
The problem about insurance companies balking at covering fires when a non-standard gadget is hooked up to the house's wiring could apply to a wide range of gadgets we cover in Gadget Freak. Most of the gadgets are electronic and many connect to the house's wiring.
Thanks for all the ideas, in the article and the comments, on how to build a remote control. I think this is a nifty design idea, and one my electrically-inclined spouse will love to try out.
Tucsonics raises an interesting point. We've all heard stories of the excuses big insurance companies use to shoot down customers' claims.
The question, then, seems to be how directly the non-compliant gadget might have contributed to a fire (or other accident). Clearly if it is the direct cause then that could be grounds to reject the claim. But what if the device is connected to the house wiring (say in another room) and is clearly not the cause of the fire? What if a non-compliant device is simply sitting on a shelf in the house, not plugged in at all? Any clarification on the rules or conventions on this?
As for my radio fan control, I bought an after-market one and installed it in an exising ceiling fan. It does not switch between windings but uses a phase angle controller (probably a triac) to adjust the AC voltage to the fan whose original speed switch is permanently set to "high." It works quite well and it has a additional channel to switch and dim the light fixture attached to the fan. There is no technical reason why someone could not mount the receiver section in a box with a plug and an outlet to control a table fan.
This is one of the reason I became a successful IC designer! It' s articles like this that introduce young minds to the art of dreaming up, designing and building projects like this. Good job!
Putting the learning aspect aside, I'd like to point out that ceiling fans (very popular here in toasty Tucson, AZ) have a UL-approved solution available on most products. Hunter, Hampon Bay, Casablanca are some brands, There is a module inside the fan housing that receives an RF coded signal from the remote control. The module connects power to the fan motor's multiple windings, as well as to the light fixture which are often part of the ceiling fans. I never tried buying the control module separately, but it is worth trying before subjecting yourself to an uninsured loss, should, heaven forbid, your homebrew caused a fire. Using any "not to code" wiring or a home brewed control will void your fire insurance in case of a fire. Better hope you will never need it.
You are quite right that there is fun and learning when you build stuff yourself, but I thought I answered that point in my last line. We do achieve those goals when we build things that we can't get off the shelf and there are plenty of such opportunities. At least for me as consultant I design and build numerous non-standard instruments both for my lab and my clients' facilities.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
