Joseph Ogando, Fastening and Adhesived Editor --
Design News,
May 7, 2001
Seeing clearly now
ADVERTISEMENT
Sponsored Content
Technology Marketplace
More and more kinds of display screen technologies have started to shine, creating new demands for compatible adhesives. To keep pace with the growing number of display materials, Adhesives Research has introduced new ARclear optically clear adhesives. Available in both transfer and single-faced-film versions, these pressure-sensitive adhesives target a variety of flat-panel, touchscreen, and projection display components—such as polarizers, filters, back lighting, and reflective materials. The transfer adhesives include permanent, strippable, and silicone varieties. These non-birefringent adhesives typically offer haze levels under 1%, clarity above 97%, and light transmission about 95%, according to Dave Williams, business development manager. Peel adhesion varies with grade and thickness, but a 1.0-mil version of the permanent grade offers a peel strength of 30 oz/in in ASTM tests. The ARclear films, which have an optically clear adhesive on one side, come in two new varieties: 3.0-mil polyester and a 7.0-mil hard-coated film. Both offer a haze less than 2%, clarity above 97%, and light transmission better than 92%, Williams reports. Peel adhesion for the 3.0-mil film is 20 oz/in, while the hard-coated version offers 15 oz/in as well as a taber abrasion less than 9% and a 3H pencil hardness.
Adhesives Research:
Enter 563
A cure for medical bonding problems
The latest light cure adhesives from Dymax target optical applications that also require Class VI biocompatability. These new single-component 140 Series Medical Optical Adhesives include UV- or visible-light-curing formulations as well as a fixturing grade that adds a heat cure mechanism for those times when an assembly has places where the light doesn't shine. The 140 Series covers a range of viscosities from a gel to wicking grades. Applications include fiber optic bonding and splicing, lens bond, and the attachment of glass, quartz, metal and plastic components to optical assemblies.
Dymax:
Enter 564
New version of metal bonding
ITW Devcon has introduced a revamped formulation of Metal Welder, a methacrylate-based adhesive for joining aluminum, steel, stainless, and other metals without primer. According to sales and marketing manager Chris Stevens, the new Metal Welder offers lap shear strengths in excess of 2,500 psi. Also new from Devcon are two rubber-toughened adhesives—a cyanoacrylate and a one-part epoxy.
ITW Devcon:
Enter 565
Adhesive takes place of welding
A new Permabond adhesive kit has been developed as an alternative to the thermite welding that normally attaches corrosion-fighting electrodes to pipelines and other steel structures. These Cathodic Protection kits consist of individually packaged Neoprene covers, electrodes, alcohol swabs, a conductive epoxy to connect the electrode to the pipe, and an industrial adhesive for the Neoprene connector. The CC468 kit handles 4, 6, and 8 gauge wire, while the CC1012 kit accommodates 10 and 12 gauge.
Permabond:
Enter 566
Cut first, glue later
PreForm Adhesives, a year-old business unit of National Starch and Chemical Corporation, has developed a variety of new die-cut, roll, tape, and sheet adhesives in epoxy and thermoplastic formulations.
According to Dan Leeser, technical manager, the company can also laser cut adhesive preforms with just a one-day turnaround time.
While suitable for manual application, precut adhesives especially target robotic assembly, Leeser adds.
For structural bonding applications, the company's adhesives offer up to 6,000 psi in lap shear strength, Leeser says. The company has developed adhesive films that do more than just bond. These films also offer functional capabilities such as thermal or electrical properties.
PreForm Adhesives:
Enter 567
Tapes for high temperature low energy
3M, at the National Design Engineering show, brought out new versions of its well-known VHB adhesive tapes. VHB 4611, which pairs an acrylic adhesive with an acrylic foam carrier, targets high-temperature applications with temperatures up to 450F. Previous VHB tapes topped out at around 300F. Applications include bonding metal parts prior to painting. VHB 5952, also an acrylic foam tape, bonds low-surface-energy materials like polyolefins without the need for primer. Both tapes are 0.045 inches thick.
JUNE 26TH WEBCAST: Collaborative Requirements Engineering
Speed your innovation. Capture the "voice of the customer" and translate customer requests into user requirements that define new products. Find out why the new ENOVIA Requirements Management solution enables organizations to improve their overall global requirements management process. Read More
Mechatronics in action
Successful synergistic integration of controls, electronics, computers and mechanical systems is key to the 21st century design process. Unlock the secrets at the Mechatronics Zone!
Webcast: Sensor Know-How Now
Join our moderator Randy Frank and John Keating from Cognex and explore Solving Industrial Inspection Problems. Read More
Engineering Concept Conduit
Engineering Concept Conduit looks at new products and the components that make them exceptional. Each month we’ll look at a new electronic product and see what makes it tick from an engineering point of view. We’ll explore the design and engineering challenges for the product and examine the components that solved those challenges.
Light Matters: Systems Level Approach to HBLED illumination applications
Its good practice to apply a systems-level approach to high-brightness LED (HBLED) illumination applications. Minimally, the system includes the optical, thermal and electrical characteristics of the of the HBLED, the lens (if any) which is built-in to its package, secondary optics such as external plastic lenses/reflectors to direct the light as your application requires and power driver electronics. Read More
Design News RSS News Feeds
Webcast: Sensor Know-How Now
