Top header wildcard
Electronics Industry Search
Already a member? Log In
New to the site? Register
TALK BACK

  Comments
  • There are no comments posted for this article.


Blogs
Ceramics Group Studies Fault Points in Molding Process from Engineering Materials
Efforts are under way to promote the promising development of ceramic injection molding. A European group of molders, feedstock suppliers and one m...


ADVERTISEMENT
  Print Friendly Version  |     Email This to a Friend  |     |  Article tools sponsored by 


Power Transmission/Motion Control

 



ADVERTISEMENT


Sponsored Content

Technology Marketplace



Interested in low-friction rotary motion? Then check out Bayside's RD series direct-drive rotary stage. Its brushless dc servomotor achieves speeds up to 200 rpm. By replacing traditional worm gears, the design reduces wear and friction, and eliminates backlash. A built-in encoder achieves high positioning accuracy with repeatability between ±2 encoder counts, and resolutions to 0.5 arc sec.

Enter 517

Tired of the same old technology for rotary indexers? The Megatorque motor from NSK has no cams, clutches, or brakes to wear. Providing massive amounts of torque for its size, the smallest YS series rotary indexer churns out 44 inch-lbs of torque in a package less than 1 inch thick and 6 inches in diameter. The largest provides 4,000 inch-lbs of torque at 3 rps. It supports up to 4,500 lbs, and moment loads up to 3,400 inch-lbs. Positioning repeatability of 2 arc min and encoder resolutions up to 614,000 counts per revolution make it suitable for robots, measuring instruments, or machining centers.

Enter 518

For a high-performance servo solution with zero maintenance, consider the GOLDLINE® DDR from Kollmorgen. There will be no gearbox lubrication, belt tensioning, or seal leakage and replacement, because the only wearing component is the bearing in the motor—and it's an oversized, rugged, crossed-roller bearing. The D081 provides up to 225 lb-ft peak torque, up to 100 lb-ft continuous torque, speeds up to 500 rpm (8.3 rps), resolution up to 2,097,152 counts/rev, and repeatability down to 0.62 arc sec. It handles axial dynamic loading up to 7,900 lbs, and moment loads to 322 lb-ft.

Enter 519

  Print Friendly Version  |     Email This to a Friend  |     |  Article tools sponsored by 

 
Talkback Comments on this Story

There are no comments posted for this article.

ADVERTISEMENT
DN'S RESOURCE CENTER Get Free Information, Made Easy