New drive system for molding machines

Eccentric crank replaces ball screws

By Design News Staff -- Design News, September 25, 2006

Thanks to their high efficiency and precise movements, all-electric molding machines have replaced many of their hydraulic counterparts over the past dozen years or so. And nearly all of these machines have something in common — they use ball screws and timing belts to handle the motion associated with injection. Moog Inc. has taken another route to all-electric injection.

At the 2006 National Plastics Exposition in Chicago, the company showed off an electric injection unit that uses an eccentric crank to drive the forward motion of the injection screw. The reasons why, according to Burkhard Erne, a Moog engineering manager, come down to inertia and longevity. "Timing belts give you a lot of inertia," he says. "Ball screws wear out, and have to be replaced." He adds that ball screws tend to lose some of their accuracy — to backlash — even before they need to be replaced.

Moog's eccentric crank, which sits atop a gear box behind the screw, addresses both problems. The beefy steel crank will last as long as the machine itself, Erne reports. What's more, the inertia of the system drops dramatically. Consider that the demo unit at the show, which would go on a 200- or 250-ton molding machine, can accelerate to its full 600 mm/sec injection speed in just 35 msec.

Injection power on the electric injection unit is 300 kW. "This much power on a unit this size is usually found only on a hydraulic machine with an accumulator, not on an all-electric machine," notes Erne, who adds that the system would be suitable for thin-walled, high-speed molding applications.

The motor's integrated resolver, which feeds back angle and angular velocity of the crank, controls the unit's injection speed. Feedback from a load cell controls the injection pressure.

Rounding out this all-electric system is a Moog servomotor, which handles the screw's rotary motion.

CONTACT: Burkhard Erne, ProControl AG, a div. of Moog Inc.

E-mail: berne@moog.com

Get more information on Moog's electric injection unit




	Eccentric crank Moog’s new, all-electric injection unit for molding machines uses an eccentric crank to drive the screw rather than the usual ball screw and timing-belt arrangement.

related stories
resource center
by this author

View more articles by Staff Staff

Technology Marketplace

Article tools sponsored by

Talkback

We would love your feedback!

» View All Talkback Threads

» Submit talk back

DN's Resource Center Get Free Information, Made Easy

Friction, Wear and Lubrication Info from Society
Society of Tribologists and Lubrication Engineers | Design Guide
Request Item
Design Tips for Engineers: The Finishing Touch
Hydro Aluminum | Design Guide
Request Item

View all DN resources >>

Design News Partner Zones

CAD/CAE Model Clean-Up: Reduce Iterative Cycles
This webinar featured research and survey results related to problems associated with preparing CAD geometry for CAE applications. We discussed how Recipe-Based Automation can help create "just-in-time" CAE-ready geometry each time a cad model is updated. Watch the Presentation

Light Matters: A High-Performance, "No-Compromise" Solid State Lamp?
First, let's define "no-compromise". In an ideal configuration, this lamp would use a high-brightness LED (HBLED) that is built into a small, integrated package, and is able to produce a large quantity of focused light, operate with a high level of reliability and generate no audible noise. Is this difficult? Yes, but it is possible.
Read More

Design Engineers' Portal for Sensing and Machine Safety
Whatever industry you're in, or whatever product you manufacture, the right sensors to automate your plant, and to improve your overall efficiency, quality and safety are a must. You'll find Banner Engineering to be an amazing resource of products, training and people with expertise.