Corr-Paint™ CP2020 Paint

By Design News Staff -- Design News, July 17, 2006

Corrosion resistance at high temperatures

Made for coating large structures and components such as motor housings, bag houses, cyclones, hoppers, pipelines and precipitators, this single-part, gray, low-viscosity, polymeric coating cures and dries at room temperature into a hard, non-porous and abrasion resistant material. It has survived long-term salt fog, salt spray and humidity of over 1,000 hours, and resists hydrochloric, nitric, ethylene chloride and sulfuric acids. It comes in a 200-240 cps viscosity, a specific gravity of 1.05 gms/cc, and solids by volume of 49 percent (67 percent by weight). It usually goes on by brush, roller or ordinary pneumatic spray equipment in a 4.0 mil wet film thickness, and dries to about 2.0 mils, typically covering 722 sq ft per gallon in a 1.0 mil dry film. It can also be applied directly on rusted surfaces. It comes in pint, quart and gallon containers. Aremco Products Inc.http://rbi.ims.ca/4928-624

related stories
resource center
by this author

View more articles by Staff Staff

Technology Marketplace

Article tools sponsored by

Talkback

We would love your feedback!

» View All Talkback Threads

» Submit talk back

DN's Resource Center Get Free Information, Made Easy

Friction, Wear and Lubrication Info from Society
Society of Tribologists and Lubrication Engineers | Design Guide
Request Item
Best Practices for Green, Energy, and Supplier Challenges
Dell Computer Corp. | Web Event
Request Item

View all DN resources >>

Design News Partner Zones

CAD/CAE Model Clean-Up: Reduce Iterative Cycles
This webinar featured research and survey results related to problems associated with preparing CAD geometry for CAE applications. We discussed how Recipe-Based Automation can help create "just-in-time" CAE-ready geometry each time a cad model is updated. Watch the Presentation

Light Matters: A High-Performance, "No-Compromise" Solid State Lamp?
First, let's define "no-compromise". In an ideal configuration, this lamp would use a high-brightness LED (HBLED) that is built into a small, integrated package, and is able to produce a large quantity of focused light, operate with a high level of reliability and generate no audible noise. Is this difficult? Yes, but it is possible.
Read More

Design Engineers' Portal for Sensing and Machine Safety
Whatever industry you're in, or whatever product you manufacture, the right sensors to automate your plant, and to improve your overall efficiency, quality and safety are a must. You'll find Banner Engineering to be an amazing resource of products, training and people with expertise.