RSS Feeds
Motion Control
By Design News Staff -- Design News, September 26, 2005
LINEAR ACTUATOR
Long life
The Size 8 non-captive linear actuator occupies 0.8 mm of space, and includes several patent-pending innovations that provide users high performance and endurance, according to the company. It is offered in a range of resolutions ranging from 0.0015 to 0.04 mm per step, and it delivers thrusts of up to 10 lbs without compromising long life or cost. It is built for several million cycles. Haydon Switch & Instrument Inc.http://rbi.ims.ca/4397-621
WRIST ROTATORS
With precision adjustment
The company's BASE pitch/yaw wrist rotators are constructed of aluminum alloy, stainless steel, and bearing bronze. It features a maximum operating pressure of 150 psi, and maximum operating temperature of 250F. Operating through 90 or 180 degrees with precision adjustment for end-of-travel positions, it features operation on plant air with digital on/off programs using pneumatic control circuits for applications that do not require servo feedback. Mack Corp.http://rbi.ims.ca/4397-622
SPEED CONTROL SYSTEM
Energy efficient
Able to maintain a constant torque value over the entire speed range of 100 to 200 rpm, the AXU series of brushless dc speed control systems are composed of a BLCK motor and a speed control unit that provides energy-efficient speed control in 10-, 25-, 40-, and 90-W output power levels. They are available in single-phase, 100-115V ac, and three-phase 200-230V ac power inputs. An external dc power supply is not required. Oriental Motor USA Corp. http://rbi.ims.ca/4397-623
ROBOT
Duct-less design
The TH1050 Scara Robot is engineered to perform high-speed operations. It features a low-profile, duct-less design, and a heavy-duty housing. It is able to reach composite speeds of 8.73 m/sec and three-axis speeds of 2,000 m/sec. With a 2 kg payload, standard cycle times are 0.48 sec; maximum payload mass is 20 kg. Arm lengths reach 1050 mm. Toshiba Machine http://rbi.ims.ca/4397-624
SERVO ACTUATOR
With integral motor
The SW series servo welding actuator features a patented new design that provides compact design, significantly extended service life, and zero maintenance. It is available in high-performance roller screw or ball screw models. It features rated life at weld force exceeding 10 million cycles for the roller screw and 5 million for the ball screw when side loading is within specification. TOL-O-MATIChttp://rbi.ims.ca/4397-625
METRIC STROKE
For low or high volume
The Z26000 captive linear actuators feature a metric stroke of 18 mm. The product is available in a range of resolutions, from 0.0127 to 0.1016 mm per step, and offers up to 4.5 Kg of force. Using rare earth magnets, the product consistently delivers high performance based on a design that reduces costs. It is designed for low or high volume applications, such as medical devices, small machinery, and instrumentation. Haydon Switch & Instrument Inc.http://rbi.ims.ca/4397-626
ROTARY SOLENOID
Low noise
The model 341 rotary solenoid develops a 5.6 oz/inch continuous torque and a 43.7 oz/inch peak torque (10 percent duty cycle) over a 25 degree movement. It has a specially designed cover made from a new laminate material that was originally developed to reduce audible noise within automotive environments. The cover reportedly reduces audible noise up to 5 dB when compared to an uncovered solenoid. Gee Plus Inc.http://rbi.ims.ca/4397-627
STEPPER MOTOR
Durable
The LINEARSTEP® linear-type stepper motor is available with outside dimensions of 25 and 35 mm. The motors' linear shaft movements enable the user to design a simple system at a lesser cost than conventional rotary stepper motors. It has a long life and durability, thanks to ball bearing support and a sturdy motor case. It is ideal for a variety of applications, including X/Y table laboratory systems, medical pump devices, semiconductor wafer handling machines, optical camera systems, and antenna communication designs. Nippon Pulse America Inc.http://rbi.ims.ca/4397-628
COUPLINGS
Stainless steel
The company's 17-4PH stainless steel couplings are designed for applications requiring high strength, excellent fatigue resistance, and high torsional stiffness. Available in three series, they are machined from a solid piece of material. A variety of OD sizes are available. The H Series accommodates shaft sizes from 0.059 to 0.75 inch, the MC Series from 0.156 to 1.75 inches, and the W Series from 3 to 20 mm. Helical Products Co. http://rbi.ims.ca/4397-629
EQUIPMENT PLATFORMS
Vibration isolation
The company's 9300 Series of equipment platforms are engineered to isolate large sensitive equipment from surrounding floor vibrations. It is configurable for a range of applications, including vibration isolation for SEMS, TEMS, CMMs, steppers, and mask aligners. It offers omnidirectional, ultra-low frequency vibration damping and automatic leveling while raising equipment just inches off the floor. Platform stiffness is comparable to that of a 3-inch plate of solid steel at approximately one-third the weight, according to the company. Kinetic Systems Inc.http://rbi.ims.ca/4397-630
SHOCK ABSORBER
Miniature
The MA 50M miniature adjustable industrial shock absorber features a weight range of 10 to 45 lbs, and an energy per cycle rating of 50 inches/lb. It is designed for easy adjustability, with integral mechanical stop and stainless steel piston rod. The product is ideal for a variety of applications, including rotary actuators, material handling and packaging equipment, small robotics, pick and place equipment, small linear slides, and machine tools. ACE Controlshttp://rbi.ims.ca/4397-631
ROTARY STAGES
Ultralow profile
The ACS LP Series ultralow profile rotary stage with integrated ER collet chuck provides automated material handling capability for a variety of materials and applications. ER collets are designed to provide excellent run-out characteristics for applications requiring high-precision gripping of tubular material. The collet is retained with a threaded retaining cap that enables quick changeover, and is configured in a "fail safe" normally-closed mode where full clamping force is applied when no air pressure is present. Aerotech Inc.http://rbi.ims.ca/4397-632
VISION SENSOR
Delivers high-speed inspections
Able to accurately sense and evaluate more than 10,000 objects per minute, the P4 Edge is fit for validating the height and width of parts, finding the location of labels, or detecting the edge of materials such as plastic or paper on a Web operation. Other features also make it easy to deploy and be operational quickly. For applications where product lines are constantly being changed, a remote teach feature allows the sensor to learn new elements it will need to inspect without connecting to a PC or shutting down the line. It can interface to machines and factory networks via its built-in 10/100 Ethernet connection, RS-232, or discrete input/outputs. Included mounting brackets facilitate easy location of the P4 sensors on machines or conveyors. The units feature three bicolor LED indicators to clearly show unit status during setup and operation. Banner Engineeringhttp://rbi.ims.ca/4397-633
COUPLINGS
Precision-honed bores
One- and two-piece rigid couplings are now offered by the company with bores as small as 1/8 inch. They feature precision-honed bores for tight tolerance and precise alignment of the shafts to be connected. Two-piece rigid couplings also feature opposing screws for dynamic balancing, therefore supporting higher speeds. A variety of standard sizes are available in straight and step bore combinations to fit shafts ranging from 1/8 to 2 inches. Ruland Mfg. Co. http://rbi.ims.ca/4397-634
MOTOR PRE-DRIVER
Reduces power supply
The ZXBM1015 single-phase motor pre-driver is designed for variable or fixed speed control of single-phase brushless dc fans, blowers, and pumps. It includes a current monitor that enables supply current on start-ups and stall to be kept permanently within OEM specifications. It is reportedly the first of its kind to offer a configurable phase commutation delay, enabling users to accurately meet the requirements of different motor sizes. Zetex Semiconductorshttp://rbi.ims.ca/4397-635
BALL SCREW
Simplifies design
The Ball Screw ComDRIVE system is engineered as a self-contained actuator package that combines a ball screw jack, motor, and gear reducer into a single compact package. It can power an entire jacking system, reducing the number of components users need to specify. Also, users can simplify designs and reduce costs since the product is an easier-to-install, integrated unit with fewer components than multi-jack systems, according to the company. Joyce/Dayton Corp.http://rbi.ims.ca/4397-636
SERVO CONTROL SYSTEM
With 16,000 count/revolution encoders
The 34 Frame I-Grade SilverNugget N3 controller/driver is designed for servo control of the company's NEMA 34-frame step motors. Also included in the system is one of six 34-frame step motors with attached encoder. The 34 frame I-Grade motor/encoders range in torque from 500 to over 3,200 oz-inch. All have 16,000 count/revolution encoders. The system handles inertial mismatches of 100:1, making it fit for direct-driving large loads in applications such as labeling, packaging, and web handling. QuickSilver Controls Inc.http://rbi.ims.ca/4397-637
ENERGY CHAIN
Lightweight
The System E3 Energy Chain features the short pitch design of the company's System E6 product line for smooth, quiet operation and low vibration. It also features the traits of the company's Zipper series of cable carriers. It is comprised of a link, spring connector strip, and opening zipper. The product is engineered to be lightweight and compact, making it ideal for smaller applications, such as drawer slides, enclosures, and pick-and-place robots. Igus Inc.http://rbi.ims.ca/4397-638
VIBRATION ISOLATION MOUNTS
In four heights
Engineered for designing or retrofitting sensitive OEM equipment where external isolation is not desired or not suited to the application, Series 1206 provides vertical and horizontal isolations. It is available in variety of shapes and sizes with load capacities ranging from 200 to 20,000 lbs. It comes in four standard heights: 4, 6, 12, and 24 inches. They have a standard blue polyurethane finish and are Class 100 cleanroom compatible. Kinetic Systems Inc.http://rbi.ims.ca/4397-639
LINEAR ACTUATOR
Range of uses
The RO-Bug remotely operated linear actuator system integrates a 12 or 24V dc servo motor with a 12 or 24V dc amplifier for remotely operated applications. Each product is tuned and configured for a standard 1 to 2 msec pulse RC interface. Ideal applications include remotely operated industrial, law enforcement, and entertainment robots; rudder aileron, throttle, and camera controls for UAV; and throttle, steering, braking, and shift controls for ROV. Ultra Motionhttp://rbi.ims.ca/4397-640
MOTOR CONTROLLER
Lightweight
The company's microcontroller-based motor controller supplies up to 180A per channel at 12 to 40V. It features multiple command input modes for use with either radio control receivers or analog devices, such as industrial or gaming joysticks. It is engineered for easy installation where space and weight are issues. It measures 7 × 5.5 × 1.5 inches, and weighs 3.4 lbs. AmpFlow Inc.http://rbi.ims.ca/4397-641
FRF ANALYZER
Powerful servo analysis GUI
The SPiiPlus FRF (frequency response function) Analyzer is a powerful servo analysis GUI for all ACS-Tech80 SPiiPlus motion controllers. It allows mechanical characterization of the user's machine and takes machine tuning and optimization a great leap forward. With this tool users can obtain the mechanical signature of their machine, identify and compensate for mechanical resonances, expand machine bandwidth and stability margins, and improve performance. In addition, OEM users can compare the mechanical signatures between different machines and measure changes in machine performance over time. ASC-Tech80http://rbi.ims.ca/4397-642
CORNER LEG SYSTEM
Enables height adjustment
The Movotec Corner Leg System is designed to enable height adjustment of a range of light industrial machines, such as workbenches, conveyors, and assembly equipment. The product's lift cylinders are integrated directly into aluminum structural profile framing material with a 10-mm T-slot. It is offered in four-leg sets with motorized or hand-crank versions. Maximum load capacity for a system of four legs is 750 lbs. Suspa Inc.http://rbi.ims.ca/4397-643
INDUSTRIAL AUTOMATION CATALOG
Data, photos, prices, and more
AutomationDirect's 2005 free catalog offers 5,500 industrial automation products for a wide range of applications. The expanded 1,700-page volume features product descriptions, technical data, photos, and price lists for PLCs, ac drives/motors, operator interfaces, sensors, encoders, and more. Automation Directhttp://rbi.ims.ca/4397-644
Talkback
DN's Resource Center Get Free Information, Made Easy
-
Quiet Strength Under Load
Groschopp | Case Study
Request Item -
Patient Lift Sound Data
Groschopp | Case Study
Request Item
