Driven to perform: Serial attached SCSI
will push performance far higher than its predecessor as well as the
parallell and serial version of the ATA interface.
The high end of the storage world is gearing up for a major advance as the venerable Small Computer System Interface (SCSI) joins the move to serial communications. Disk drives using the recently completed Serial Attached SCSI link are expected to appear next year.
The shift to serial will let SCSI continue advancing beyond the 320 Mbytes/second rate that appeared to be the peak speed for parallel SCSI links. Serial Attached SCSI (SAS) brings many features of the high end Fibre Channel interface, which is designed for far larger enterprise systems. "SAS is scalable. With parallel SCSI you could only get to 16 drives on one adapter, and with SAS you can go to 16,000," says Gordy Lutz, enterprise marketing manager at
Seagate Technology of Scotts Valley, CA (www.seagate.com). He adds that SAS is a point-to-point link with a 300 Mbytes/second speed, so adding more drives effectively adds more bandwidth. Even a single SAS channel exceeds the maximum sustained rate of about 260 Mbytes/second that Ultra320 parallel SCSI could provide.
Additionally, SAS is compatible with the common Serial ATA interface now on desktop disk drives, using identical cabling and connectors which are much smaller and cost less than SCSI products.
The serial interface utilizes software and firmware developed for parallel SCSI, though it isn't backwards compatible on hardware. While the shift to serial is a bigger step than earlier upgrades, standards committees leveraged well-proven existing technologies. "One goal was to eliminate invention, so it's an interface with little risk," says Marty Czekalski, interface architecture initiatives manager for Maxtor's Server Products Group based in SanJose, CA (www.maxtor.com).
Though the standard is complete, products won't appear until next summer. Early next year, the SCSI Trade Association feels there will be enough products available to hold a "plugfest" so engineers can see how all products operate together.
Then design engineers can build complex storage systems or simply gain the benefits of simpler installation and maintenance. In large systems, it's now possible to use low-cost desktop disk drives to speed up tasks that were once delegated to slow tape drives. The reason for that is because SAS can use Serial ATA drives designed for use on desktop PCs.
"Typically, SAS systems will use high performance, high reliability drives, but SATA compatibility lets people use low cost, low performance drives for applications that won't see a lot of accessing," says Dan Reno, server strategy and planning manager, for the San Jose-based Server HDD Business Unit of Hitachi Global Storage Technologies (www.hgst.com).
The small connectors and cabling of SAS make it possible to use several smaller drives in a 1 or 2 U housing, bringing RAID (redundant arrays of independent disks) benefits.
"If you can put in a few more drives, you'll have the benefits of RAID: better performance, improved reliability, and lower heat dissipation," says Mike Chenery, VP for Advance Product Engineering at Fujitsu Computer Products of America Inc. in San Jose (www.fcpa.fujitsu.com).
JUNE 26TH WEBCAST: Collaborative Requirements Engineering
Speed your innovation. Capture the "voice of the customer" and translate customer requests into user requirements that define new products. Find out why the new ENOVIA Requirements Management solution enables organizations to improve their overall global requirements management process. Read More
Mechatronics in action
Successful synergistic integration of controls, electronics, computers and mechanical systems is key to the 21st century design process. Unlock the secrets at the Mechatronics Zone!
Webcast: Sensor Know-How Now
Join our moderator Randy Frank and John Keating from Cognex and explore Solving Industrial Inspection Problems. Read More
Engineering Concept Conduit
Engineering Concept Conduit looks at new products and the components that make them exceptional. Each month we’ll look at a new electronic product and see what makes it tick from an engineering point of view. We’ll explore the design and engineering challenges for the product and examine the components that solved those challenges.
Light Matters: Systems Level Approach to HBLED illumination applications
Its good practice to apply a systems-level approach to high-brightness LED (HBLED) illumination applications. Minimally, the system includes the optical, thermal and electrical characteristics of the of the HBLED, the lens (if any) which is built-in to its package, secondary optics such as external plastic lenses/reflectors to direct the light as your application requires and power driver electronics. Read More
Design News RSS News Feeds
Webcast: Sensor Know-How Now
