The Beech 1900D provides safe flight for thousands of business people around the world.
Lexington, MA—Willard Crowe knows that safety drives many decisions in the aerospace business. He is a senior design engineer at Raytheon Aircraft Co. and part of the design team that uses flex shafts to extend and retract flap controls on the company's new 19-passenger Beech 1900 aircraft.
There's a lot at stake—if the flaps of an aircraft don't work simultaneously, the aircraft becomes unstable. The 1900 uses four flex shafts from S.S. White (Piscataway, NJ) per plane. Two of the units control the right and left inboard flaps and two units control the right and left outboard flaps.
For accurate movement, Crowe uses a single electric motor with a reduction gearbox that drives all four flex shafts at the same time. The shafts, in turn, rotate jackscrews that raise and lower the flaps, which operate in a track inside each wing. Each pair of flex shaft cables, one long and one short, must operate at equal speeds in forward and reverse operation.
Beech aircraft has used some flex shafts in the past, but never at this length. The original aircraft used a single pair of 63-inch flex shafts in its flap designs. "As the plane's wing got longer with each new design, the flex shafts also grew," explains Crowe. The 1900 now uses a pair of 140-inch flex shafts.
Any instability in the motion of the flexible shafts creates unequal flap movement, making the plane unstable. To eliminate this concern, S.S. White manufactures their flexible shafts by wrapping the wire either left or right. Special part numbers help maintenance crews replacing shafts to assure that the wrap is going in the right direction. Each cable pair is installed in opposite directions—one pair goes left while the other goes right. For flexible shafts, this means that when in operation, one pair turns with the wrap while the other turns against the wrap.
To protect the flap control mechanisms, each flexible shaft is encased so that no bare cables can be accidentally damaged. The cables are inside the airframe, so they are out of the open air. Although the cable casings and cable locations are not entirely sealed from the outside environment, the flap subassembly is reliable on the 1900.
Other changes to the aircraft include the use of a larger electric motor and a slight change in the gearing. "But the basic concept is the same," says Crowe. "It's the history of safety and long life that also makes Beech a preferred aircraft for many customers."
For more information about flexible shafts from S.S. White Technologies: Enter 534
JUNE 26TH WEBCAST: Collaborative Requirements Engineering
Speed your innovation. Capture the "voice of the customer" and translate customer requests into user requirements that define new products. Find out why the new ENOVIA Requirements Management solution enables organizations to improve their overall global requirements management process. Read More
Mechatronics in action
Successful synergistic integration of controls, electronics, computers and mechanical systems is key to the 21st century design process. Unlock the secrets at the Mechatronics Zone!
Webcast: Sensor Know-How Now
Join our moderator Randy Frank and John Keating from Cognex and explore Solving Industrial Inspection Problems. Read More
Engineering Concept Conduit
Engineering Concept Conduit looks at new products and the components that make them exceptional. Each month we’ll look at a new electronic product and see what makes it tick from an engineering point of view. We’ll explore the design and engineering challenges for the product and examine the components that solved those challenges.
Light Matters: Systems Level Approach to HBLED illumination applications
Its good practice to apply a systems-level approach to high-brightness LED (HBLED) illumination applications. Minimally, the system includes the optical, thermal and electrical characteristics of the of the HBLED, the lens (if any) which is built-in to its package, secondary optics such as external plastic lenses/reflectors to direct the light as your application requires and power driver electronics. Read More