When visibility is poor, instrument landing systems (ILS) create a "picture" of the runway for pilots so that they can bring a plane down more safely. But because most systems involve extensive and expensive equipment installation on the ground and in the aircraft, only the busiest airports are equipped. A new, low-cost instrument landing system promises to make ILS more affordable for more airports.
The landing system analyzes RF signals and uses measurements of aircraft attitude and altitude to create the runway image that the pilot can view on display.
Based on monolithic millimeter-wave integrated circuits, the system uses a single, fixed, on-board multi-beam antenna system, called a radiometer, and six RF beacons on the ground. Four beacons outline the runway, and two more widely spaced apart provide a more accurate indication of range.
Since the system uses a minimal amount of equipment, it doesn't produce a "camera-like" picture. However, overlapping RF beams provide an accurate image of the runway relative to the aircraft. Each ground-based emitter uses an amplitude-modulated frequency. Narrow, millimeter-wave-receiving signals from the antenna pick up the RF transmission. Then conversion circuitry converts them into video signals that can be segregated by a fast Fourier transform processor. Another application of the millimeter-wave technology is in a fully populated focal plane array.
Merit Shoucri, TRW, 1 Space Park, Redondo Beach, CA 90278; Tel: (310) 812-5161; E-mail: merit.shoucri@trw.com.
JUNE 26TH WEBCAST: Collaborative Requirements Engineering
Speed your innovation. Capture the "voice of the customer" and translate customer requests into user requirements that define new products. Find out why the new ENOVIA Requirements Management solution enables organizations to improve their overall global requirements management process. Read More
Mechatronics in action
Successful synergistic integration of controls, electronics, computers and mechanical systems is key to the 21st century design process. Unlock the secrets at the Mechatronics Zone!
Webcast: Sensor Know-How Now
Join our moderator Randy Frank and John Keating from Cognex and explore Solving Industrial Inspection Problems. Read More
Engineering Concept Conduit
Engineering Concept Conduit looks at new products and the components that make them exceptional. Each month we’ll look at a new electronic product and see what makes it tick from an engineering point of view. We’ll explore the design and engineering challenges for the product and examine the components that solved those challenges.
Light Matters: Systems Level Approach to HBLED illumination applications
Its good practice to apply a systems-level approach to high-brightness LED (HBLED) illumination applications. Minimally, the system includes the optical, thermal and electrical characteristics of the of the HBLED, the lens (if any) which is built-in to its package, secondary optics such as external plastic lenses/reflectors to direct the light as your application requires and power driver electronics. Read More